• 제목/요약/키워드: ground and flight test

검색결과 278건 처리시간 0.031초

VERTICAL OZONE DENSITY PROFILING BY UV RADIOMETER ONBOARD KSR-III

  • Hwang Seung-Hyun;Kim Jhoon;Lee Soo-Jin;Kim Kwang-Soo;Ji Ki-Man;Shin Myung-Ho;Chung Eui-Seung
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2004년도 한국우주과학회보 제13권2호
    • /
    • pp.372-375
    • /
    • 2004
  • The UV radiometer payload was launched successfully from the west coastal area of Korea Peninsula aboard KSR-III on 28, Nov 2002. KSR-III was the Korean third generation sounding rocket and was developed as intermediate step to larger space launch vehicle with liquid propulsion engine system. UV radiometer onboard KSR-III consists of UV and visible band optical phototubes to measure the direct solar attenuation during rocket ascending phase. For UV detection, 4 channel of sensors were installed in electronics payload section and each channel has 255, 290, 310nm center wavelengths, respectively. 450nm channel was used as reference for correction of the rocket attitude during the flight. Transmission characteristics of all channels were calibrated precisely prior to the flight test at the Optical Lab. in KARI (Korea Aerospace Research Institute). During a total of 231s flight time, the onboard data telemetered to the ground station in real time. The ozone column density was calculated by this telemetry raw data. From the calculated column density, the vertical ozone profile over Korea Peninsula was obtained with sensor calibration data. Our results had reasonable agreements compared with various observations such as ground Umkhr measurement at Yonsei site, ozonesonde at Pohang site, and satellite measurements of HALOE and POAM. The sensitivity analysis of retrieval algorithm for parameters was performed and it was provided that significant error sources of the retrieval algorithm.

  • PDF

킥 모터 지상 시험의 플룸 복사 열유속 측정 (Measurement of Radiative Heat Flux of Kick Motor at Ground Test)

  • 김성룡;최상호;고주용;김인선
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.440-443
    • /
    • 2008
  • Plume radiation has been measured during ground tests of KSLV-I kick motor in order to predict the thermal load on the equipment around the kick motor at flight. The measuring positions are the kick motor base, and the measured heats were about 2${\sim}$5 w/cm$^2$. The measured heat showed a lot of shot fluctuation in their values, and the radiative heats at the latter half of time are higher than those of the first half. A plausible explanation for these phenomena was given as the variation of alumina particles with time. The radiative heats along the plume axis were also measured recently at 8 positions with 1.5m radius from plume axis, but only the initial parts of the results could be acceptable because the sensor were damaged by the accumulated heat. The strongest heat occurred at the middle of the plume, which can be explained with different view factors. Despite of the plausible explanation, it seems to need more analysis because the plume structure such as temperature, alumina particle, after burning has not been revealed until yet. The measure heat flux has been reflected in the prediction of the plume radiation at high altitude where the kick motor operates.

  • PDF

T-50 정밀추적 성능 향상을 위한 세로축 제어법칙에 관한 연구 (A Study on Longitudinal Control Law in order to Improvement of T-50 Fine Tracking Performance)

  • 김종섭;황병문;고기옥;배명환
    • 한국항공우주학회지
    • /
    • 제33권8호
    • /
    • pp.50-55
    • /
    • 2005
  • 현대의 고성능 전투기는 공력성능 및 조종성능의 향상을 위하여 대부분 세로축 방향으로 항공기를 불안정하게 설계하는 정안정성 완화(Relaxed Static Stability) 개념을 채택하고 있다. 비행제어법칙의 설계 작업은 이러한 불안정하게 설계된 항공기가 주어진 비행임무에 대하여 만족스런 안정성과 조종성능을 발휘할 수 있도록 비행성능을 조작하는 일련의 과정이다. 전투기의 조종성능은 공대공 전투(Air-to-Air Fighting)와 공대지 전투(Air-to-Ground Fighting)로 분류할 수 있다. 공대공 전투 시에는 전체포착(Gross Acquisition) 및 정밀추적(Fine Tracking)성능을 동시에 만족해야 한다. T-50 비행시험 결과, 공대공 추적에서 전체포착성능은 만족하지만, 정밀추적성능은 만족하지 못하였다. 본 논문에서는 정밀추적성능의 향상을 위해 새로운 개념의 세로축 제어법칙 적용에 관한 연구 방향을 제시하였다. HQS 조종사 시뮬레이션 및 비행시험 결과, 본 제어법칙을 적용하였을 때 전체포착성능의 저하 없이 정밀추적성능을 개선시킬 수 있었다.

실시간 다중항법을 이용한 관성측정기의 비행환경 성능 검증 기법 (Performance verification methods of an inertial measurement unit in flight environment using the real time dual-navigation)

  • 박병수;이상우;정상문;한경준;유명종
    • 한국항공우주학회지
    • /
    • 제45권1호
    • /
    • pp.36-45
    • /
    • 2017
  • 본 논문에서는 고기동 항체 적용을 위한 관성측정기의 비행환경 특성을 분석할 수 있는 방법을 제안한다. 먼저 관성측정기의 센서 출력을 직접 비교하는 방법을 제안하고, 시험결과를 통하여 장 단점을 분석하였다. 관성측정기의 센서 출력을 비교하는 방법의 단점 보완과 항법 해를 비교할 수 있는 방법을 제안한다. 이를 위해 유도전자장치를 이용하여 실시간 다중 항법 연산이 가능하도록 구현하였다. 제안한 방법은 유도전자장치를 이용하기 때문에 시스템의 안정성과 타 구성품의 영향도 등을 고려해야 한다. 따라서 실시간 다중 항법 연산이 가능하도록 구현된 내용을 기술하고, 제안한 방법의 검증을 위해 지상시험과 비행시험을 수행하였다. 시험 결과를 통해 제안한 방법은 관성측정기 개발의 신뢰성을 향상하는데 기여함을 확인하였다.

태안 비행장과 김포공항 비행시험을 통한 ILS와 GBAS 비교 (Comparison of ILS and GBAS Through Flight Test in Taean Aerodrome and Kimpo Airport)

  • 구본수;김우리얼;주요한;홍교영
    • 한국항행학회논문지
    • /
    • 제19권3호
    • /
    • pp.192-198
    • /
    • 2015
  • 현재 대부분의 공항에서 운용중인 계기착륙시스템 (ILS; instrument landing system)은 시스템 특성상 단일경로로 운영되어, 다수의 항공기를 수용하기에는 한계가 있다. 이러한 한계점을 해결하기 위해 GNSS를 이용한 위성항법시스템인 GBAS가 개발되었다. GBAS는 ILS 보다 위치 정확도도 높고 단일경로가 아닌 다수의 경로를 이용하여 착륙이 가능하기 때문에, 다양한 착륙절차를 수행할 수 있다. 이에, 본 논문에서는 환경적인 요건과 공역 제한 때문에 ILS 설치가 불가피한 태안비행장에 가상 ILS 절차를 수립한 후 cessna skyhawk 172를 이용하여 가상 ILS 절차와 curved approach 절차를 비교하는 비행시험을 하여 curved approach에 대한 장점을 확인 하였다.

레이저 고도계 및 GPS를 이용한 무인기의 자동이착륙용 지면고도계산 알고리듬 설계 (Ground Altitude Computation Algorithm using Laser Altimeter and GPS for UAV Automatic Take-off and Landing)

  • 조상욱;최기영;김성수
    • 한국항공우주학회지
    • /
    • 제41권1호
    • /
    • pp.54-60
    • /
    • 2013
  • 본 논문에서는 무인기 자동이착륙을 위해 DGPS와 레이저 고도계를 이용한 고도계산 알고리듬을 제시하였다. 지상시험을 통해 레이저 고도계의 특성을 분석하고 신호의 난반사를 제거하기 위해 저역통과 필터를 설계했으나, 시뮬레이션 결과 단일 센서를 사용해서 지면고도를 정확하고 안정적으로 측정할 수 없음을 확인하였다. 레이저 고도계의 단점을 보완하기 위해 DGPS에서 출력되는 수직방향 속도를 사용하여 선형 칼만필터를 설계하였다. 설계한 필터는 시뮬레이션, 지상시험 그리고 비행시험의 검증단계를 거쳐 자동이착륙에 필요한 정확도를 만족함을 확인하였다.

수출형 기본 훈련기에 대한 기체구조물 내구성 입증 (Airframe Durability Certification for Export Basic Trainer)

  • 박태규;박정규;문창오
    • 항공우주시스템공학회지
    • /
    • 제9권2호
    • /
    • pp.19-24
    • /
    • 2015
  • Export basic trainer was designed to add armed configuration required by customer. Design configuration of main wing was changed to satisfy changed internal load caused by armed configuration. It was verified that design changed main wing airframe of export basic trainer satisfy the requirement through the structural detail analysis, structural ground test and flight test. This paper presents the durability test procensure and test result for the main wing of export basic trainer.

무인항공기 시스템을 활용한 선박 식별 및 도시 시스템 개발 (Development of Ship Identification and Display System using Unmaned Aerial Vehicle System)

  • 최성민;고윤호;강영신
    • 한국항공우주학회지
    • /
    • 제44권10호
    • /
    • pp.862-870
    • /
    • 2016
  • 선박의 안전한 운항과 자동입출항을 관리하기 위해서 사용되는 선박위치 발신장치(AIS, V-PASS)는 모든 선박에 의무적으로 장착하는 표준장비이다. 선박위치 발신장치를 활용한 선박식별 시스템을 항공기에 탑재하여 대형 어업지도선이나 경비함 등의 선박 및 지상 시스템에서 선박식별정보를 수신할 수 있게 되면 해양감시와 재난대응을 신속하게 수행할 수 있다. 본 논문은 항공기용 통합 선박식별 장치를 활용한 선박식별 및 도시 시스템의 개발 및 비행시험결과와 향후의 활용방안에 대해 기술하였다.

Spin 안정형 구형 로켓트에 관한 이론 및 실험적 연구 (Theoretical and Experimental Study on a Spin-Stabilized Spherical Rocket)

  • 이종훈
    • 한국국방경영분석학회지
    • /
    • 제3권1호
    • /
    • pp.83-96
    • /
    • 1977
  • The combustion chamber and nozzle of an end burning, small spherical rocket is designed. A spherical external shape has a number of advantages such as fixed center-of-gravity and minimum aerodynamic precession torques during flight and a better mass distribution for gyro-stabilization as contrasted to a conventional ogive rocket shape. It is shown that the cross-sectional variation of the end burning solid propellant with length is an exponential geometry to provide a constant thrust-weight ratio of the rocket device during the propellant burning period, and that the factors which affect the attainment of the constant relationship of thrust to weight in the design are the initial propellant area, initial weight of the rocket and propellant density. The measurement of the transient thrust in the ground static test using black powder propellant supports the predicted results. A wind tunnel having a $30{\times}30{\times}75cm$ test section and Mach number 0.11 is constructed, and a simple balance-type device is designed for the measurement of the drag of a spinning sphere. The experimental results indicate that the. spinning has no effect on the magnitude of the drag up to the Reynolds number $3{\times}10^5$. Numerical computation of the flight trajectories for various launching angles is presented, and the gyro-stabilization of spinning sphere is discussed.

  • PDF

고기동 항체의 위치추적용 GPS 중계기 설계/제작 (GPS Translator Design and Manufacturing for High Dynamic Vehicle)

  • 강설묵;이상정
    • 한국군사과학기술학회지
    • /
    • 제6권1호
    • /
    • pp.39-48
    • /
    • 2003
  • A GPS translator system is used to get the precise and reliable trajectory data for the high dynamic test vehicles, such as missiles or artillery shells. The missile system with high dynamics, vibration and shock needs to determine its position and velocity in particular. The proposed GPS translator on the test vehicle receives GPS signals, amplifies, down-converts, digitally samples, BPSK modulates, up-converts them to S-band, and then retransmits them to the ground translator processing station. It has doppler variation and signal noise, so design method for resolving them is proposed. The performance of the translator is proved by environmental test and real flight test.