• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.931-934
• /
• 2002

To establish the optimal conditions for increasing oil yields from grape seed, extraction solvent, extraction time, and temperature were examined. Using grinding, grinding and roasting, grinding and steaming, and grinding, roasting, and steaming methods. Pressing extraction method resulted in 34.0% oil yield. Grinding and roasting, grinding and steaming, and grinding, roasting, and steaming gave 64.3, 63.0, and 65.6% yield, respectively. Ether solvent treatment resulted in 77.4 and 80.9% recoveries after 24 and 48 h static, respectively. The results of sensory evaluation revealed, oils extracted under optimal condition showed the best flavor, aroma, and whor, followed by grinding, grinding and roasting, grinding, roasting, and steaming, and grinding and steaming. Taking these results together, the optimal methods for oils extraction from grape seed were as follows: grape seed ${\rightarrow}$ washing ${\rightarrow}$ drying ${\rightarrow}$ roasting ($95{\sim}100^{\circ}C$ for 20 min) ${\rightarrow}$ cooling (room temperature) grinding ${\rightarrow}$ (0.5 mm>) ${\rightarrow}$ steaming ($0.8{\sim}0.9\;kg{\cdot}f/cm^2$ for 10 min) ${\rightarrow}$ pressing ($1st\;400\;kg/cm^2\;for\;2{\sim}3\;min,\;2^{nd}\;550{\sim}600\;/cm^2$ for 10 min, $3^{rd}\;700kg/cm^2$ for 60 min) ${\rightarrow}$ oils (yield $;85{\sim}90%$).

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1267-1271
• /
• 2012

Demand for optical glass device used for lighting could increase rapidly because of LED lighting market growth. The optical glass devices that have been formed by hot press molding process the desired optical performance without being subjected to mechanical processing such as curve generation or grinding. EL-Max material has been used for many engineering applications because of their high wear resistance, high compressive strength, corrosion resistant and very good dimensional stability. EL-Max is very useful for a glass lens mold especially at high temperature and pressure. The performance and reliability of optical components are strongly influenced by the surface damage of EL-Max during grinding process. Therefore, the severe process condition optimization shall be necessary for the highly qualified EL-Max glass lens mold. To get the required qualified surface of EL-Max, the selection of type of the diamond wheel is also important. In this paper, we report best grinding conditions of ultra-precision grinding machining. The grinding machining results of the form accuracy and surface roughness have been analyzed by using Form Talysurf and NanoScan.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.258-267
• /
• 2021

PURPOSE. The purpose of this study was to compare the surface roughness, phase transformation, and surface topography of dental zirconia with three different yttrium oxide compositions under same grinding and polishing conditions. MATERIALS AND METHODS. Three zirconia disks (IPS e.max ZirCAD LT, MT, MT multi, Ivoclar Vivadent AG, Schaan, Liechtenstein) were selected for experimental materials. Sixty-nine bar-shaped specimens were fabricated as 12.0 × 6.0 × 4.0 mm using a milling machine and glazing was conducted on 12.0 × 6.0 mm surface by same operator. With a custom polishing device, 12.0 × 6.0 mm surfaces were polished under same condition. Surface roughness (Ra[㎛]) was measured before grinding (C), after grinding (G), and at every 3 steps of polishing (P1, P2, P3). X-ray diffraction and FE-SEM observation was conducted before grinding, after grinding, and after fine polishing (P3). Statistical analysis of surface roughness was performed using Kruskal-Wallis test and Mann-Whitney-U test was used as a post hoc test (α = .05). RESULTS. There were no significant differences of surface roughness between LT, MT, and MM groups. In LT, MT, and MM groups, P3 groups showed significantly lower surface roughness than C groups. X-ray diffraction showed grinding and polishing didn't lead to phase transformation on zirconia surface. In FE-SEM images, growths in grain size of zirconia were observed as yttrium oxide composition increases. CONCLUSION. Polished zirconia surface showed clinically acceptable surface roughness, but difference in yttrium oxide composition had no significant influence on the surface roughness. Therefore, in clinical situation, zirconia polishing burs could be used regardless of yttrium oxide composition.

• Preventive Nutrition and Food Science
• /
• v.6 no.3
• /
• pp.197-199
• /
• 2001

The effects of cooking peanut kernels before grinding on the n-hexanal content of peanut milk was investigated. Analysis of headspace volatiles revealed that n-hexanal was greatly reduced by cooking peanut kernels before grinding. Total solids and protein content tended to decrease as cooking time was increased. The most satisfactory condition of cooking peanut kernels for preparing peanut milk was 10 min.

• Journal of Powder Materials
• /
• v.2 no.2
• /
• pp.142-148
• /
• 1995

2219 aluminum alloy bonded diamond wheels containing intermetallic compounds were fabricated by powder metallurgy method. Nickel and titanium were added in aluminum matrix piece. The hot pressing condition was $600^{\circ}C$ and 20 Mpa in the furnace of the electric resistance type. The mechanical properties and grinding tests were carried out to confirm the wheel performance. Aluminum oxide ceramics were chosen for use in the grinding tests. The test proved that the heat resistance 2219 aluminum bonded diamond wheel containing 15 wt% nickel and 15 wt% titanium respectively showed the best performance.

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.149-154
• /
• 1990

Before benefication of Okchun feldspar, all kinds of Fe-compounds and mafic minerals which were included in feldspar were studied. Also to produce 30/140mesh products as glass materials, optimum grinding condition and degree of liberation were studied. Fe-compounds were Biotite and Limonite, and these were existed along the cleavage. Optimum grinding time was 2min. and at this time weight percent of 30/140mesh products was 72.7% and degree of liberation at this particle size was 91.5%.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.309-313
• /
• 2000

In order to meet the industrial requirement, precision grinding with brush tool has been applied. To analyze the brush tool characteristics, several parameters including numbers of brush string installed in a single holder, depth of cut and brush length have been changed. Several data from various source were acquired using AE, acceleration and tool dynamometer during the process. Consistent results revealing certain trend with respect to each process condition were observed.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.269-274
• /
• 2009

The main objective of this study was to establish optimum condition of wet grinding process for manufacturing microparticulated seaweed calcium. Process parameters such as concentration of forming agent, rotor speed, bead size, feed rate, and grinding time were adapted during wet-grinding of seaweed calcium. The particle size range of the raw seaweed calcium was 10-20 $\mu$m. The calcium particles were reduced to under 1 $\mu$m as nano scale after grinding. Gum arabic was suitable for forming agent and 5%(w/v) concentration was the most effective in grinding efficiency. A wet-grinding process operated at 4,000 rpm rotor speed, 0,4 mm bead size, and 0.4 L/hr feeding rate, respectively, produced less than 600 mm(>>90%)-sized particles. In batch systems, 8 cycles of grinding showed higher efficiency, but 20 min of grinding time in continuous processing was more efficient to reduce particle size than the batch processing. Based on the result, the optimum conditions of the wet grinding process were established: operation time of 20 minutes, rotor speed of 4,000 rpm, bead size of 0.4 mm, feed rate of 40 mL/min and 30% mixing ration with water. The size of the resulting ultra fine calcium particles ranged between 40 and 660 mm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.607-608
• /
• 2012

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.97-101
• /
• 1998

In this study, The ultra-precision finishing system is applicable to all kind of the cylnderical workpiece products fast and easy. This system was applied to chrome coated steel to investigate the characteristic of grinding; (1) 3$mu extrm{m}$ of abrasive film is not use for grinding performance. (2) Grinding condition of coated chrome steel would set up differently, in 30~12${\mu}{\textrm}{m}$, in 9~5${\mu}{\textrm}{m}$. (3) The surface roughness of chrome coated steel was about Ra 0.0009${\mu}{\textrm}{m}$ in abrasive grain size 5${\mu}{\textrm}{m}$.