• Journal of Radiation Protection and Research
• /
• 제45권1호
• /
• pp.35-44
• /
• 2020

Background: Cadmium zinc telluride (CZT) is a promising material because of a high detection efficiency, good energy resolution, and operability at room temperature. However, the cost of CZT dramatically increases as its size increases. In this study, to achieve a large effective volume with relatively low cost, an array structure comprised of individual virtual Frisch-grid CZT detectors was proposed. Materials and Methods: The prototype consisted of 2 × 2 CZTs, a holder, anode and cathode printed circuit boards (PCBs), and an application-specific integrated circuit (ASIC). CZTs were used and the non-contacting shielding electrode method was applied for virtual Frisch-grid effect. An ASIC was used, and the holder and the PCBs were fabricated. In the current system, because the CZTs formed a common cathode, a total of 5 channels were assigned for data processing. Results and Discussion: An experiment using ¹³⁷Cs at room temperature was conducted for 10 minutes. Energy and timing information was acquired and the depth of interaction was calculated by the timing difference between the signals of both electrodes. Based on obtained three-dimensional position information, the energy correction was carried out, and as a result the energy spectra showed the improvements. In addition, a Compton image was reconstructed using the iterative method. Conclusion: The virtual Frisch-grid CZT detector based on the array structure was developed and the energy spectra and the Compton image were successfully acquired.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.70-72
• /
• 2005

Nuclear fuel assemblies for pressurized water reactors(PWR) are loaded in the reactor core throughout the residence time of three to five years. A spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assembly. The spacer grid assembly is structurally required to have enough buckling strength under various kinds of lateral loads acting on the nuclear fuel assembly so as to keep the nuclear fuel assembly straight. To meet this requirement, it is necessary to weld the welding parts carefully and precisely. In this study, laser welding qualities of the Zircaloy spacer grid assembly welded by two welding companies, such as weld strength, weld penetration depth, and weld bead size, are examined and compared.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.58-67
• /
• 2014

A grid-connected inverter used for renewable energy resources produces harmonic components in the switching frequency. To effectively reduce switching harmonic components, several types of filter are generally used in the output stage of the grid-connected inverter. Many research works on LCL filter design have been done to maintain the performance with low cost. However, it is not easy to make the filter design be economical and optimal due to the varying characteristic of magnetic core and redundancy design by experience. In this paper, a design method for a LCL filter is presented through the inductor optimization scheme in view of the size and cost when the inductor is manufactured using the magnetic core. The effectiveness is verified through tests using a 3kW grid-connected inverter by simulations and experiments.

• 한국시뮬레이션학회논문지
• /
• 제14권3호
• /
• pp.21-31
• /
• 2005

In state-of-the-art games, characters can move in a goal-directed manner so that they can move to the goal position without colliding obstacles. Many path-finding methods have been proposed and implemented for these characters and most of them use the A* search algorithm. When .the map is represented with a regular grid of squares or a navigation mesh, it often takes a long time for the A* to search the state space because the number of cells used In the grid or the mesh increases for higher resolution. Moreover the A* search on the grid often causes a zigzag effect, which is not optimal and realistic. In this paper we propose to use visibility graphs to improve the search time by reducing the search space and to find the optimal path. We also propose a method of taking into account the size of moving characters in the phase of planning to prevent them from colliding with obstacles as they move. Simulation results show that the proposed method performs better than the grid-based A* algorithm in terms of the search time and space and that the resulting paths are more realistic.

• 전기학회논문지P
• /
• 제64권2호
• /
• pp.85-91
• /
• 2015

With the increasing popularity of Smart Grid infrastructure, it is much easier to collect energy usage data using AMI (Advanced Measuring Instrument) from residential housing, buildings and factories. Several researches have been done to improve an energy efficiency by analyzing the collected energy usage data. However, it is not easy to store and analyze the energy data using a traditional relational database management system since the data size grows exponentially with an increasing popularity of Smart grid infrastructure. In this paper, we are proposing a Hadoop based Big data system to store and analyze energy usage data. Based on our limited experiments, Hadoop based energy data analysis is three times faster than that of a relational database management system based approach with the current system.

• 한국재난정보학회 논문집
• /
• 제17권1호
• /
• pp.25-38
• /
• 2021

연구목적: 지속적으로 발생하는 태풍의 피해를 감소시키기 위해 태풍대응의 예방·대비 단계에서 적극적으로 활용할 수 있도록 표준화된 격자의 활용방안을 제안하였다. 태풍위험지역에 대한 격자 융합정보를 시범적으로 생성함으로써 태풍대응을 위한 격자의 실효성을 확인한다. 연구방법: 태풍 상황대응 시 유용하게 사용될 수 있는 태풍 위험지역에 대한 융합정보를 생성하기 위해 vector, raster 등 다양한 형태의 원천데이터를 사용하여 세밀한 공간 단위로 태풍 위험지역 격자 정보를 구축하였다. 기구축된 정보들과의 호환성 및 각 지자체별로 생성되는 격자 정보의 호환성을 위해 표준화된 격자모델을 적용하였다. 연구결과: 국가지점번호의 격자체계를 적용하여 태풍상황대응시 유용하게 활용될 수 있는 태풍위험지역 격자를 구축하였다. 국가지점번호 격자체계는 다차원 계층구조의 격자크기를 정의하고 있으며, 100m와 1,000m 크기의 격자를 활용하여 서울지역 태풍위험지역 격자를 구축하였다. 결론: 다양하고 조밀한 공간정보를 하나의 격자정보로 융합하여 가시화함으로써 재난 의사결정을 위한 정보의 단순화를 통해 신속한 재난대응을 지원할 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.231-232
• /
• 2016

This paper investigates the design of multi-winding coupled inductor for minimum inductor current ripple. Based on the general circuit model of coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor of n-phase multi-winding coupled inductor which corresponds to a minimum inductor ripple current becomes -(1/n-1), i.e. a complete inverse coupling without leakage inductance, as the duty ratio of steady-state operating point approaches 1/n, 2/n, ${\cdots}$ or (n-1)/n. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the duty ratio of steady-state operating point approaches either zero or one. Therefore, coupled inductors having optimal coupling factor can minimize the ripple current of inductor and inductor size.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.324-330
• /
• 2014

In this study, the numerical model developed by Hong et al.(2008) was improved to be applied to rapidly varying flows such as the inundation of dry land or flow transitions due to large gradients of the bathymetry. A numerical approximation was applied that was consistent with the conservation of momentum in flow expansions and with the Bernoulli equation in flow contractions. The approximation was second order, but the accuracy reduced to first order near extreme values by the use of a minmod limiter. The modified model was verified by acomparison with the theoretical critical depth of weir, and for sufficiently smooth conditions and a fine grid size, both approximations converged to the same solution. In terms of the grid size, it was more effective at obtaining solutions than the previous model and reproduced the inundation of dry land.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.879-891
• /
• 2018

A bidirectional dc-dc converter is used in battery energy storage systems owing to the growing requirements of a charging and discharging mode of battery. The magnetic coupling of output or input inductors in parallel-connected multi modules of a bidirectional dc-dc converter is often utilized to reduce the peak-to-peak ripple size of the inductor current. This study proposes a novel design guideline to achieve minimal ripple size of the inductor current under bidirectional power flow. The newly proposed design guideline of optimized coupling factor is applicable to the buck and boost operation modes of a bidirectional dc-dc converter. Therefore, the coupling factor value of the coupled inductor does not have to be optimized separately for buck and boost operation modes. This new observation is explained using the theoretical model of coupled inductor and confirmed through simulation and experimental test.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.9-13
• /
• 2004

To confirm the previous finding that FDS predicts a fire growth rate too rapid compared with an experiment in a center fire in a room with an opening, the same computational fluid dynamics was applied to two types of fires, wall fire and comer fire. First the grid size was chosen to eliminate possible numerical errors due to a coarse grid system. Then the two types of fires were simulated for three different fire sizes, 7.65, 21.25, and 51.57kW for each type, which are the same as in the experiment to be compared with. The fires were predicted to grow too fist although the average temperatures and heights of the neutral planes were in good agreement with measurement.