• 한국측량학회지
• /
• 제9권2호
• /
• pp.19-36
• /
• 1991

본 연구는 토공량 결정에 있어 비신형 해석에 의한 부등 간격의 토공량 계산을 하는데 그 목적이 있다. 여기서는 수치 해석에 의해 유도된 식과 선형과 비선형 점고법을 비교 연구하였다. 그 결과 유도된 식의 알고리즘은 기존의 선형과 비선형 점고법보다 더 정확하였다. 각 방법들에 대한 실제적용을 위해 세가지의 모형 실험을 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.91-92
• /
• 2011

Beat is a phenomenon, where the magnitudes and frequencies of the voltage and the current fluctuate. This paper describes a quantitative analysis of the beat phenomenon of a wind farm using the envelope of a current during intertie/grid fault conditions. In this paper, the ratio of the crest to the trough of the envelope curve and the time interval between adjacent troughs are defined and used to evaluate the beat phenomenon quantitatively. Beat phenomena under various fault and wind conditions are analyzed. The proposed quantitative analysis seems simple but effective in the more understanding of beat phenomenon of a wind farm, and thus can be used as a basis for operation and/or protection of an intertie.

• 대한조선학회논문집
• /
• 제36권1호
• /
• pp.70-81
• /
• 1999

선체주위의 점성유동을 계산하기 위해서는 수치계산을 위한 3차원 공간 격자계가 필요하다. 본 논문에서는 타원형 미분 방정식인 Poisson 방정식의 해를 이용하여 3차원 공간 격자계를 구성하는 방법을 개발하였다. 2차원에서 사용되던 Sorenson방법을 3차원으로 확장하여 격자계의 분포 및 교차 각도를 지정하는 함수를 정의하게 하였다. 미분방정식의 해는 weighting function scheme과 modified strongly implicit procedure를 사용하여 구하였고, 3차원 내부 격자계와 경계면과의 매끄러운 연결을 위해 trans-finite interpolation을 이용하였다. 적용예로서 컨테이너 운반선과 대형 유조선 주위의 난류유동 계산을 위한 공간 격자계를 보였다.

• International Journal of Fluid Machinery and Systems
• /
• 제8권2호
• /
• pp.102-112
• /
• 2015

In the Nordic grid, a trend observed the recent years is the increase in grid frequency variations, which means the frequency is outside the normal range (49.9-50.1 Hz) more often. Variations in the grid frequency leads to changes in the speed of rotation of all the turbines connected to the grid, since the speed of rotation is closely related to the grid frequency for synchronous generators. When the speed of rotation changes, this implies that the net torque acting on the rotating masses are changed, and the material of the turbine runners must withstand these changes in torque. Frequency variations thus leads to torque oscillations in the turbine, which become dynamical loads that the runner must be able to withstand. Several new Francis runners have recently experienced cracks in the runner blades due to fatigue, obviously due to the runner design not taking into account the actual loads on the runner. In this paper, the torque oscillations and dynamic loads due to the variations in grid frequency are simulated in a 1D MATLAB program, and measured grid frequency is used as input to the simulation program. The maximum increase and decrease in the grid frequency over a 440 seconds interval have been investigated, in addition to an extreme event where the frequency decreased far below the normal range within a few seconds. The dynamic loading originating from grid frequency variations is qualitatively found by a constructed variable $T_{stress}$, and for the simulations presented here the variations in $T_{stress}$ are found to be around 3 % of the mean value, which is a relatively small dynamic load. The important thing to remember is that these dynamic loads come in addition to all other dynamic loads, like rotor-stator interaction and draft tube surges, and should be included in the design process, if not found to be negligible.

• 대한공간정보학회지
• /
• 제20권1호
• /
• pp.109-116
• /
• 2012

본 연구에서는 CCHE2D와 EFDC모형을 이용한 모의를 통하여 격자의 횡단해상도에 따른 물리적 지형의 재현성과 모의결과에 대한 영향을 검토하고자 하였다. 낙동강 금호강 유입구간을 대상으로 2006년 강우사상에 대한 부정류모의를 통하여 면적고도곡선과 대상구간내 수위관측소 지점에서의 실측치와 모의치간의 비교를 통하여 구성격자망의 적정성 및 모의결과에 대한 영향을 각각 검토하였다. 일반적으로 격자 해상도의 증가는 계산시간의 증가를 야기하므로 수행 내용과 목적, 계산의 효율성 측면에서 적절한 격자해상도의 선택이 필요하다. 정밀한 모의를 위해서는 고해상도 격자를 이용한 모의를 수행해야 하나, 빠른 의사결정이 요구되는 홍수기와 같이 모형수행의 효율성을 고려해야 하는 경우에 적용 가능한 물리적 지형의 재현성과 결과에 대한 신뢰성을 보장할 수 있는 적정 격자 해상도가 존재함을 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권6호
• /
• pp.667-681
• /
• 2009

We describe a method to decompose a cube with trilinear interpolation into a collection of tetrahedra with linear interpolation, where the isosurface topology is preserved for all isovalues during decomposition. Visualization algorithms that require input scalar data to be defined on a tetrahedral grid can utilize our method to process 3D rectilinear data with topological correctness. As one of many possible examples, we apply the decomposition method to topologically accurate tetrahedral mesh extraction of an interval volume from trilinear volumetric imaging data. The topological correctness of the resulting mesh can be critical for accurate simulation and visualization.

• 한국측량학회지
• /
• 제16권1호
• /
• pp.119-132
• /
• 1998

국가수치지도의 고도정보를 바탕으로 정확하고 효율적인 정규격자 수치고도모델을 생성하는 데에 있어서는 기초자료로 제공되어진 고도정보의 배치 형태와 수, 정확성을 유지하기 위한 기준점의 추가 방법, 수학적 추정 보간방법의 선택이 가장 중요하게 고려되어져야 할 것이며 , 이들의 이상적인 배합은 추정 고도의 정확성에 결정적 영향을 줄 것이다. 본 연구는 국가 수치지도에 이미 구축되어 있는 고도자료를 이용하여 정규격자 수치모델의 생성을 위한 다양한 격자망 간격과 일반적으로 수치고도모델 처리 프로그램에서 가장 많이 적용되고 있는 보간 방법들에 대하여 수치적 실험을 통한 문제점을 분석한 후, 가장 최적의 격자간격과 보간 방법을 제시하는데 목적을 두었다. 수치시험 결과 정규격자 수치고도모델의 생성에는 크리깅 보간방법이 표준오차가 가장 적게 계산되어 정확성 면에서 매우 우수한 결과를 가져 왔으며, 정규 격자망 간격은 생성할 등고선 간격의 2배가 가장 최적이라는 결과를 가져왔다.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1151-1160
• /
• 2016

In recent years, the energy storage systems such as LiB, NaS, RFB(Redox-Flow Battery), Super- capacitor, pumped hydro storage, flywheel, CAES(Compressed Air Energy Storage) and so on have received great attention as practical solutions for the power supply problems. They can be used for various purpose of peak shaving, load leveling and frequency regulation, according to the characteristics of each ESS(energy storage system). This paper will focus at 1 MWh RFB system, which is being developed through the original technology project of energy material. The output of ESS is mainly characterized by C-rate, which means that the total rated capacity of battery will be delivered in 1 hour. And it is a very important factor in the ESS operation scheduling. There can be several options according to the operation intervals 15, 30 and 60minutes. The operation scheduling is based on the optimization to minimize the daily electricity cost. This paper analyzes the cost-saving effects by the each operating time-interval in case that the RFB ESS is optimally scheduled for peak shaving and load leveling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.40-45
• /
• 1994

The TCAD(Technology Computer Aided Design) software tool is a popular name to be able to simulate the semiconductor process and device circuit. We have developed a two-dimensional TCAD software tool included an editor, parser, each process unit, and 2D, 3D graphic routine that is Integrated Environment. The initial grid for numerical analysis is automatically generated with the geometric series that use the user default(given) line and position separated with grid interval and the nodes corresponding to each mesh point stoic the all the possible attribute. Also, we made a data structure called PIF for input or output. Methods of ion implantation in this paper arc Monte Carlo, Gaussian Pearson and Dual-Pearson. Analytical model such as Gaussian, Pearson and Dual-Pearson were considered the multilayer structure and two-dimensional tilted implantation. We simuttaneously calculated the continuity equation of impurity and point defect in diffusion simulation. Oxidation process was simulated by analytical ERFC(Complementary Error Function) model for local oxidation.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.61-66
• /
• 2011

The purpose of this paper is to design a hydraulic actuator to operate under high pressure conditions. The flow characteristics under design conditions of hydraulic actuator were numerically conducted by commercial fluid dynamic code(ANSYS CFX V11). The numerical analysis was performed by transient technique according to the variation of stroke times, which was changed from 0 to 1 second by interval of 0.01. Turbulence model, $k-\omega$ SST was selected to secure more accurate prediction of hydraulic oil flow. The ICEM-CFD 11 and CFXMesher, reliable grid generation software was also adapted to secure high quality grid necessary for the reliable analysis. According to the simulation results, the flow rate which was supplied to the hydraulic actuator was 30.4l/min. These results are in good agreement with design results within 3.5% error.