• Journal of Distribution Science
• /
• v.11 no.9
• /
• pp.35-42
• /
• 2013

Purpose - The objective of this paper is to identify how different incentive factors influence teachers with different ages and professional titles at LinYi University, China. Research design, data, and methodology - A total of 435 university teachers participated in the study, and the Grey Correlation Degree Analysis method was used to analyze the sample data. Results - The results indicated that teachers with different professional titles and ages have different levels of preference on various incentive factors. Young and assistant-level teachers seem to place more importance on incentives than associate and senior-level teachers. Conclusions - This study has some practical implications. First, the principal and school administrators should pay more attention to young and middle-aged teachers and to how these teachers are motivated through monetary incentives as compared to associate or senior-level teachers. Second, school administrators should pay more attention to teachers' opportunities for career growth and should provide more opportunity for academic promotion. In order to stimulate positivity in teachers, school administrators should adopt various incentive systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.616-619
• /
• 2009

Color tracking behavior of in the fringe-field switching (FFS) mode using a liquid crystal with positive dielectric anisotropy has been studied. In the in-plane switching and vertical alignment devices, color chromaticity at normal direction changes from bluish to yellowish white linearly with increasing grey levels from dark to white state. Interestingly, abnormal behavior in color tracking is observed in FFS devices using a liquid crystal with positive dielectric anisotropy, that is, it changes from bluish to yellowish up to a certain middle grey level but turns over to bluish white with further increasing from a grey level to a fully white state. In this paper, we analyze this abnormal effect from the calculated and experimental results.

• Journal of Science and Technology Studies
• /
• v.13 no.1
• /
• pp.1-39
• /
• 2013

How would technoscientists collaborate in their technoscientific practices? Based on the ethnographic research done at NRI(Neuroscience Research Institute), this research shows how collaboration occurs in/outside the interdisciplinary laboratory. As previous studies show, collaboration makes researches possible that otherwise would have been impossible. Korean technoscientists who are situated in the scientific periphery, practice contextualized collaboration in their labs. These collaborations are invisible before opening the black box of the lab. But it acquires visibility after certain incidents such as collaborations, debates and discussions, malfunctioning of the instruments, and networking with other actors occur. These networks again become invisible after the certain incidents end. However these blackboxing and whiteboxing (opening the blackbox) processes occur simultaneously in various levels, it is almost impossible to identify them separately. In real technoscientific practices, blackboxing and whiteboxing do not occur distinctively. They almost always occur at the same time on multi-layered levels, hence forming the 'grey box' of technoscientific practices. Lastly, collaborations inside laboratory have in/visible features, because laboratories function as Foucauldian heterotopias.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.797-809
• /
• 1998

The purposes of this study were to develop the computer program for the contrast and geometric correction in digital subtration radiography with the IDL (Interactive Data Language) and compare the results with this program for the correction of the non-standardized radiographs to those of standardized radiographs and those with "Emago" software, the commercial program for the correction. The procedures were written for the contrast correction and subtraction with the geometric correction, using IDL. 32 pairs of periapical radiographs of premolar and molar portion of two dry human mandibles were taken at two different occasions with XCP film holder(nonstandardized films) and another 32 pairs with customized XCP film holder(standardized films). Subtraction of standardized film pairs was performed. Subtraction after the contrast and geometric correction of non-standardized films was performed using the newly developed program and Emago software. Standard deviations of grey levels of the subtracted images by the newly developed program were compared with those of the standardized group and Emago-corrected group. Standard deviations of grey levels of new program-corrected group were much smaller than those of the Emago-corrected group (p<0.001) and slightly larger than those of standardized group (p<0.05). However, the difference was very minute. This study indicates that the newly developed program written with IDL may substitute the mechanical standardization for digital subtraction radiography.

• Computers and Concrete
• /
• v.23 no.6
• /
• pp.421-431
• /
• 2019

The alarming rate of depletion of natural stone based coarse aggregates is a cause of great concern. The coarse aggregates occupy nearly 60-70% by volume of concrete being produced. Research efforts are on to look for alternatives to stone based coarse aggregates from sustainability point of view. Response surface methodology (RSM) is adopted to study and address the effect of ferrochrome slag (FCS) replacement to coarse aggregate replacement in the ordinary Portland cement (OPC) based concretes. RSM involves three different factors (ground granulated blast furnace slag (GGBS) as binder, flyash (FA) as binder, and FCS as coarse aggregate), with three different levels (GGBS (0, 15, and 30%), FA (0, 15, and 30%) and FCS (0, 50, and 100%)). Experiments were carried out to measure the responses like, workability, density, and compressive strength of FCS based concretes. In order to optimize FCS replacement in the OPC based concretes, three different traditional optimization techniques were used (grey relational analysis (GRA), technique for order of preference by similarity (TOPSIS), and desirability function approach (DFA)). Traditional optimization techniques were accompanied with principal component analysis (PCA) to calculate the weightage of responses measured to arrive at the final ranking of replacement levels of GGBS, FA, and FCS in OPC based concretes. Hybrid combination of PCA-TOPSIS technique is found to be significant when compared to other techniques used. 30% GGBS and 50% FCS replacement in OPC based concrete was arrived at, to be optimal.

• IE interfaces
• /
• v.11 no.3
• /
• pp.15-22
• /
• 1998

A new improved algorithm in edge location to subpixel accuracy using decent-based weight to spatial information is proposed in this paper and applied to automated visual inspection(AVI) system. An application of the new edge operator as an edge detector is also provided and compared with Tabatabai and Lyvers edge detectors. The existing algorithms located edger to subpixel accuracy using least-square or moment-based methods. The algorithms also use only spatial information or grey-level values to locate edges. However, the proposed algorithm consider the weighted sum of grey-levels values of each edge pattern. The results show that the proposed algorithm is relatively less biased and has smaller standard deviation than the edge operations developed by Tabatabai and Lyvers in the presence of noise.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.898-899
• /
• 2008

In this paper we propose a new method for obtaining two way switchable LCD. For this two domain vertical alignment LCD is used. A two way LCD is able to show different images on the same screen based on left and right perspectives. Viewing angle dependence of different grey levels of transmittance for the polar angles 0, +45 and -45 degree are also found out.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.1921-1929
• /
• 2015

The smart substation is the heart of a transmission system, which is particularly emphasized as the most significant composition of smart grids in China. In order to assess the functionality performance of substation technologies, this paper presents methods used to identify the most promising solutions for smart substation design and to evaluate the technical levels of available technologies. The multi-index optimization model is presented to address the issue of smart substation planning. A mathematical model of the planning decision problem is established with multiple objectives consisting of economic, reliability, and green key indices, and many kinds of concerns including physical and environmentally friendly operations are formulated as a set of constraints. With respect to the assessment of the technical level regarding integration of advanced technologies into a substation, a modified grey whitenization weight function is adopted to structure a novel grey clustering method. The proposed grey clustering approach is used to overcome the difficulty of insufficient quantitative assessment capacity for traditional methods. The evaluation of technical effects provides the classification definition for the development phase and the maturity level of the smart substation. The effectiveness of the proposed approaches in planning decision-making and evaluation of construction efforts is demonstrated with case studies involving the actual smart substation projects of Wenchongkou substation in China Southern Power Grid (CSG) and Mengzi substation in State Grid Corporation of China (SGCC).

• Smart Structures and Systems
• /
• v.7 no.4
• /
• pp.241-262
• /
• 2011

Cast iron pipe has been used as a water distribution technology in North America since the early nineteenth century. The first cast iron pipes were made of grey cast iron which was succeeded by ductile iron as a pipe material in the 1940s. These different iron alloys have significantly different microstructures which give rise to distinct mechanical properties. Insight into the non-destructive structural condition assessment of aging pipes can be advantageous in developing mitigation strategies for pipe failures. This paper examines the relationship between the small-strain and large-strain properties of exhumed cast iron water pipes. Nondestructive and destructive testing programs were performed on eight pipes varying in age from 40 to 130 years. The experimental program included microstructure evaluation and ultrasonic, tensile, and flexural testing. New applications of frequency domain analysis techniques including Fourier and wavelet transforms of ultrasonic pulse velocity measurements are presented. A low correlation between wave propagation and large-strain measurements was observed. However, the wave velocities were consistently different between ductile and grey cast iron pipes (14% to 18% difference); the ductile iron pipes showed the smaller variation in wave velocities. Thus, the variation of elastic properties for ductile iron was not enough to define a linear correlation because all the measurements were practically concentrated in single cluster of points. The cross-sectional areas of the specimens tested varied as a result of minor manufacturing defects and levels of corrosion. These variations affect the large strain testing results; but, surface defects have limited effect on wave velocities and may also contribute to the low correlations observed. Lamb waves are typically not considered in the evaluation of ultrasonic pulse velocity. However, Lamb waves were found to contribute significantly to the frequency content of the ultrasonic signals possibly resulting in the poor correlations observed. Therefore, correlations between wave velocities and large strain properties obtained using specimens manufactured in the laboratory must be used with caution in the condition assessment of aged water pipes especially for grey cast iron pipes.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.19-25
• /
• 2005

A colour-difference formulae would be based on a colour appearance model, but, So far, most colour-difference formulae in common use are based on empirical fits to data. Therefore, of the many proposed, none are completely satisfactory but advances have been made in recent years. A new color-difference data set has been produced with the aims of making a comparison of the advanced CIE Lab formulae as well as confirming the effect of color-difference. 416 low lightness pairs that have only lightness-difference were produced for evaluation of CIE Lab-based formulae on lightness-difference from glossy polyester fabric. The standard color-difference pair was prepared and used. It was neutral grey sample pair that has only lightness difference. The standard pair was used to investigate lightness tolerances. And grey-scale method used to evaluate visual assessment. CIE Lab coordinates of the samples were measured using a X-Rite 8200 spectrophotometer. Visual assessments were carried out using Gretag Macbeth The Judge II Light Booth. A study of color tolerances at low lightness was carried out and get avaliable some results.