• 농업과학연구
• /
• 제38권1호
• /
• pp.115-120
• /
• 2011

20% of total energy use to sustain temperature of building inside. In this reasons, researchers effort to improve the thermal insulation capacity with new wall system. Using appropriate materials and consisting new wall system should considered in energy saving design. OSB(Oriented strand board), Larch lining board used to consist wall system. $2{\sim}6$ Larch lining board has tongue & groove shape for preventing moisture. Comparing with gypsum board and green timber lining board as interior sheathing material, temperature difference of Green timber wall system was bigger than temperature difference of gypsum board wall system. This aspects indicate that Green timber wall system was revealed higher thermal insulation property than gypsum board wall system. Gypsum board portion transfer heat easily because temperature difference gradient of gypsum board wall system was smaller than OSB wall system. Total temperature variation shape of G-4-S and G-6-S show similar model but, temperature variation shape in green timber wall portion assume a new aspect. The purpose of this study was that possibility of thermal insulation variation and new composition of wall system identify to improve thermal insulation performance. In the temperature case, this study shows possibility of improving thermal insulation performance. Humidity, sunshine and wind etc. should considered to determine building adiabatic properties.

• 한국환경복원기술학회지
• /
• 제3권4호
• /
• pp.1-10
• /
• 2000

This study aims at the new design system development of landscape architecture structures, as soundproof wall using reinforced soil block. This structures, that is new soundproof wall system, have to be maintained stability on acting critical wind load, which is combined exist soundproof wall system and soundproof wall system using environmental green stone block. To the harmony of this system, the post block, so-called landscape block or cast block, is manufactured. It's possible to stand of the post bearing system combined with post-pile and post block. Through the comparison with a serious code for the acting wind load on the soundproof wall, the reasonable wind load could be calculated. Also, the mechanical stability on the green stone block was checked by the Lab. tests based on the UBC (Uniformed Building Code). Because the critical height of soundproof wall system using green stone generally was restricted, the new system demands to combination of the exist system and the new system. For the stability analysis of them, the utility program, SAP2000, was used. And, a semi-auto program on the design system of the new soundproof wall using green stone was developed, which can be easily use because of the simplification.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.681-688
• /
• 2005

The Green Wall is the highest eco-system among a segmental retaining wall systems. Recently, the demand of high segmental retaining wall (SRW) is increased in domestic. The soil nailing system is applied in order to maintain the high SRW stability for steeper slope. However, the proper design approach that can consider the earth pressure reduction effects in soil nailing system has not been proposed. Hence, the purpose of this study was to provide the design and analysis technique of the segmental retaining wall reinforced by soil nailing. Also, in this study, various parametric studies using numerical method as shear strength reduction (SSR) technique were carried out. In the parametric study, the length ratio and the bond ratio of the soil nailing were changed to identify the earth pressure reduction effect of the retaining wall reinforced by soil nailing.

• 한국지반신소재학회논문집
• /
• 제5권3호
• /
• pp.1-7
• /
• 2006

1960년대 초 오스트리아에서 개발된 그린월(green wall) 공법은 독립식 콘크리트 보형식의 옹벽으로, 전, 후면 가로보와 세로방향으로 버팀보를 연속적으로 쌓아 올려 내부에 다짐성토를 시행, 구조체가 일체 거동하도록 강성벽체(rigid body)를 형성시키는 옹벽 구조물이다. 국내의 경우, 옹벽 전면 가로보 사이의 공간에 식생이 가능한 친환경적 장점이 있어, 1999년 이후 국내실정을 고려 원지반의 토공량을 최소화할 수 있도록, 쏘일네일 등으로 보강하여 절토 공사현장에 다양하게 적용되고 있는 추세이다. 그러나 그린월 옹벽과 배면에 보강된 쏘일네일이 합벽시공될 경우, 네일에서의 토압분담효과 등에 대한 영향을 고려하지 않고 일반적인 Rankine 토압으로 설계, 시공하여 이중으로 보강공사비용이 투입되고 있는 실정이다. 따라서 본 연구에서는 G$\ddot{a}$ssler(1988)가 제안한 'Two-Body Translation Mechanism(TBTM)'을 이용한 안정해석기법을 수정하여, 네일의 토압 분담효과를 반영할 수 있는 설계기법을 제시하였으며, 본 연구에서 제안한 설계기법을 적용하여 그린월의 보수, 보강공사 비용을 상당부분 감소한 현장설계 사례를 소개하고자 한다. 아울러 본 연구에서 제시한 설계기법을 토대로 계산된 토압을 수치해석 결과와 비교, 검토해 보았다.

• 한국지반신소재학회논문집
• /
• 제5권3호
• /
• pp.9-15
• /
• 2006

그린월 공법은 독립식 콘크리트 보형식의 옹벽으로, 전, 후면 가로보와 세로 방향으로 버팀보를 연속적으로 쌓아 올려 내부에 다짐성토를 시행함으로써 구조체가 일체 거동하도록 강성벽체(rigid body)를 형성시키는 옹벽 구조물이다. 최근의 그린월공사는 원지반 절취량을 최소화 할 수 있다는 장점으로 절토 공사현장에 다양하게 적용되고 있으며, 주로 앵커 및 쏘일네일 등과 함께 시공하는 추세이다. 이처럼 그린월과 함께 쏘일네일이 시공되는 경우에는 전면벽체의 강성이 크기 때문에 연성전면벽체의 경우 보다 전체 시스템의 안정성 증대가 예상되나 실제 설계에서는 이를 반영하지 않고 쏘일네일만 설계하므로 비경제적인 요소가 많은 실정이다. 따라서 본 연구에서는 그린월과 같은 강성전면벽체와 쏘일네일 공법이 함께 시공되는 경우에 대하여 강성전면벽체로 인한 전체 시스템의 안정성 증대효과를 평가해 보았다. 본 연구에서는 전면벽체의 강성변화에 따른 전체 시스템의 안정성 증대효과를 평가하기 위하여 실내모형실험을 수행하였으며, 한계평형해석을 시행하여 그린월과 같은 전면벽체의 강성이 전체 활동에 대한 안전율에 미치는 영향을 평가하였다.

• 한국가구학회지
• /
• 제25권2호
• /
• pp.148-153
• /
• 2014

Importance of energy consumptions has being emphasized because of problems of the energy and environment. So, recently, green wall systems have been installed to reduce building energy consumptions. The green wall systems provide several benefits; they make it possible to maintain moderate thermal comforts by greenery. Greening such a surface wall in the building by plants, the temperature of the wall can be properly controlled that purifies the air and improves the view spanning over the space. This study evaluated the effects of green wall systems on reducing room temperature quantitatively, changing of humidity, decreasing of $CO_2$. Test results were confirmed; first, the space installed by green walls showed that temperature and $CO_2$ decreased and humidity was increased. Second, two structures were compared with the solar radiation, and green wall systems controlled the temperature and humidity stably near the wall regardless of the amount solar radiation. In conclusion, the green wall systems can contribute to thermal comforts and indoor air quality in the buildings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1038-1045
• /
• 2006

The Green Wall is highest eco-system among a segmental retaining wall systems. Recently, the demand of high segmental retaining wall (SRW) is increased in domestic. The soil nailing system is applied in order to maintain the high SRW stability for steeper slope. However, the proper design approach that can consider the earth pressure reduction effects in soil nailing system has not been proposed. This study was performed to introduce the design case by 'Two-Body Translation mechanism' to be able to consider distribution of earth pressure in the soil nailing when designing the green wall using soil nailing system. Also, this study attempts to evaluate the earth pressure change when advanced soil nailing system is constructed using $FLAC^{2D}$ ver. 3.30 program and 'Two-Body Translation mechanism'. Also in this study, various parametric studies using numerical methods as shear strength reduction (SSR) technique and limit equilibrium technique were carried out. In the parametric study, the length ratio and the bond ratio of the soil nailing were changed to identify the earth pressure reduction effect of the retaining wall reinforced by soil nailing.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제28권3호
• /
• pp.1-11
• /
• 2023

Permeable reactive barrier (PRB) is a prominent in-situ remedial option for cleanup of contaminated groundwater and has been gaining increasing popularity in recent years. Funnel-and-gate systems, comprised of two side wings of impermeable walls and a central gate wall, are frequently implemented in many sites, but often suffers from bypassing of groundwater due to the progressive clogging of the gate wall over extended period of time. This study investigated technical feasibility of a hybrid funnel-and-gate system designed to address the flow deterioration in the gate wall. The key attribute of the proposed hybrid system is the operation of drainage units at the barrier walls and rear end of the gate wall. A conceptual modeling with MODFLOW indicated the groundwater inside the barrier was maintained at appropriate level to be guided toward the gate wall, yielding constant discharging of groundwater from the gate.

• 농업과학연구
• /
• 제38권3호
• /
• pp.541-547
• /
• 2011

Korean building industry was developed by concrete and steel construction. However, concrete and steel have some problems which low carbon storage capability and difficulty of recycling. According to many studies, timber has high carbon storage capability, high recycling capability and sustainable supporting capability. Focus on this factors of timber, make new wall structure as Green Timber Wall panels and check the shear performance to use wall system in housing construction such as light-weight timber construction and nondearing wall on other construction. In the results, B-4-B and B-4-S show similar modulus of shear stiffness on the table. GH-4-GH has slip shape failure mode between Green Timber Wall boards. GH-4-GV has most stable characteristic curve than other specimens.

• 한국실내디자인학회논문집
• /
• 제22권3호
• /
• pp.33-42
• /
• 2013

The purpose of this study was to analyze the design trend of the vertical garden design in the indoor space through the examples of green wall in the lobby space. For the analysis, this study looks into the 'Guide for the Building Greening System' to understand the technical consideration for the green wall. After that, the key design elements was drawn from existing green walls through the literature review and field survey and field-survey. The study picked six green walls which was completed after 2000 in the lobby space in Seoul. The major findings of this study were as follows: First, the design factors mainly depend on the plant selection, which leads to the outlook and texture of the vertical walls. The texture is expressed by the two-dimensional or three-dimensional planting methods which is related to the selection of plant species. Second, the vertical walls in the lobby area should be planned for the function of space which could be transition, human traffic, mood and attraction. Third, the vertical wall should be integrated with the surroundings in order to reinforces the dynamic or static space experience.