• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.565-572
• /
• 2009

Greenhouse gas(GHG) inventories and basic strategies for Jeonbuk regional government were established to reduce greenhouse gas emissions. The method to construct GHG inventories of Jeonbuk followed the 'Revised IPCC 1996 Guidelines'which was used for the 'Third National Communication of the Republic of Korea under UNFCCC'. Korean government could use primary energy consumption for the energy industries section in the national GHG inventories. However, regional governments should use secondary energy consumption (included electricity consumption) for the energy industries section for their GHG inventories because they could not control the emission of energy transformation section. In the result of Jeonbuk GHG inventories in 2006, carbon dioxide($CO_2$) emissions from fuel combustion covered 87.1% of total emissions. Methane($CH_4$), carbon dioxide($CO_2$) from other sections, nitrous oxide($N_2O$) and F-gas(HFCs, PFCs, $SF_6$) accounted for 8.1, 2.2, 1.6 and 1.0% of total emissions, respectively. The sectional emission decreased in the order of the energy(88.0%), agriculture(7.6%), waste(2.3%) and industrial processes(2.1%) section. The energy industries section that contained electricity consumption was the most dominant emission source in the energy section. F-gas consumption, rice cultivation and waste incineration were main emission sources in the industrial processes, agriculture and waste section, respectively. In this study, basic directions of each section were established by the results of Jeonbuk GHG inventories in 2006.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.251-256
• /
• 2017

This study presents measures to enhance the efficiency of Successive Alkalinity Producing Systems(SAPS), a natural biological purification method that prevents environmental pollution arising from the release of Acid Mine Drainage(AMD) from abandoned mines into rivers and groundwater. The treatment of AMD using SAPS is based on biological processing technology that mostly involves sulfate reducing bacteria(SRB). It has been proven effective in real-world applications, and has been employed in various projects on the purification of AMD. However, seasonal decrease in temperature leads to a deterioration in the efficiency of the process because sulfate-reducing activity is almost non-existent during cold winters and early spring even if SRB is able to survive. Against this backdrop, this study presents measures to enhance the activity of the SRB of the organic layer by integrating light emitting diode(LED)s in SAPS and to maintain the active temperature using LEDs in cold winters. Given that mine drainage facilities are located in areas where power cannot be easily supplied, solar cell modules are proposed as the main power source for LEDs. By conducting further research based on the present study, it will be possible to enhance the efficiency of AMD treatment under extreme cold weather using solar energy and LEDs, which will serve as an environmentally-friendly solution in line with the era of green growth.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.3-11
• /
• 2013

This study was carried out to estimate greenhouse gas reduction potentials under treatment methods of combustible wastes excavated from closed landfill. The treatment methods of solid wastes were landfilling, incineration, and production of solid recovery fuel. The greenhouse gas reduction potentials were calculated using the default emission factor presented by IPCC G/L method of IPCC (Intergovernmental Panel on Climate Change). The composition of excavated waste represented that screened soil was the highest (65.96%), followed by vinyl/plastic (19.18%). This means its own component is similar to the other excavated waste from unsanitary landfill sites. Additionally, its bulk density was 0.74 $t/m^3$. In case of landfilling of excavated waste, greenhouse gas emission quantity was 60,542 $tCO_2$. In case of incineration of excavated waste, greenhouse gas emission quantity was 9,933 $tCO_2$. However, solid recovery fuel from excavated waste reduced 33,738 $tCO_2$ of the greenhouse gas emission quantity. Therefore, solid recovery fuel production is helpful to reduce of greenhouse gas emission.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.257-266
• /
• 2017

In this study, the dust/smoke detection algorithm was developed with a multi-spectral satellite remote sensing method using Moderate resolution Imaging Spectroradiometer (MODIS) Level 1B (L1B) data and the results were validated as RGB composite images of red(R; band 1), green(G; band 4), blue(B; band 3) channels using MODIS L1B data and Cloud-Aerosol Lidar with Orthogonal Polarization Satellite Observations(CALIPSO) Vertical Feature Mask (VFM) product. In the daytime on March 30, 2007 and April 27, 2012, the consistencies between the dust/smoke detected by this algorithm and verification data were approximately 56.4 %, 72.0 %, respectively. During the nighttime, the similar consistency was 40.5 % on April 27, 2012. Although these results were analyzed for limited cases due to the spatiotemporal matching for the MODIS and CALIPSO satellites, they could be used to utilize the aerosol detection of geostationary satellites for the next generations in Korea through further research.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.181-187
• /
• 2013

$Dy^{3+}$-doped $BaMoO_4$ phosphor powders were synthesized by using the solid-state reaction method and their crystalline structure, morphology and size of particles, excitation and emission properties were investigated. The structure of all the phosphor powders, irrespective of the mol ratio of $Dy^{3+}$ ions, was found to be the tetragonal system with the main diffraction peak at (112) plane. The grain particles agglomerate together to form larger clusters with increasing the mol ratio of $Dy^{3+}$ ions. The excitation spectra were composed of a broad band centered at 293 nm and weak multiline peaked in the range of 230~320 nm, which were due to the transitions of $Dy^{3+}$ ions. The emission of the phosphors peaking at 666 and 754 nm, originating from the transitions of $^4F_{9/2}{\rightarrow}^6H_{11/2}$ and $^4F_{9/2}{\rightarrow}^6H_{9/2}$ of $Dy^{3+}$ ions, was rather weak, while the intensity of blue and yellow emission peaking at 486 nm and 577 nm due to the transitions of $^4F_{9/2}{\rightarrow}^6H_{15/2}$ and $^4F_{9/2}{\rightarrow}^6H_{13/2}$ of $Dy^{3+}$ ions was significantly stronger. The experimental results suggest that the white-light emission can be realized by controlling the yellow-to-blue intensity ratio of $Dy^{3+}$ emission.

• Weed & Turfgrass Science
• /
• v.3 no.3
• /
• pp.232-239
• /
• 2014

Zoysiagrass seeds had low germination or lack of germination uniformity under natural condition. To improve the final germination percentage of zoysiagrass seeds, we investigated the methods of proper pre-treatment to enhance germination rate of zoysiagrass. Seeds were subjected to the testa scarification and four types of seed priming methods, namely, hydro priming (distilled water), osmotic priming (polyethylene glycol -0.5 MPa, -1.0MPa, -2.0 MPa), halo priming (Potassium nitrate 100 mM, 200 mM, 400 mM), and solid matrix priming (seed : microcel-E : distilled water = 4:1:8) with and without 25% KOH treatment in the testa. The scarification improved the germination rate and reduced the germination time. Osmotic priming (PEG -0.5 MPa) with scarification were significantly increased the seed germination rate and decreased MGT, and $T_{50}$. Seed germination rate obtained by osmotic priming (PEG -0.5MPa) with scarification increased above 60% in comparison with natural condition. Conclusively, scarified and primed zoysiagrass seed germinated more rapidly and uniformly in the study. The present results suggested that PEG priming treatment with KOH treatment prior to sowing could improve germination percentage, and this method makes us establish the early zoysiagrasses in the field.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.2
• /
• pp.151-159
• /
• 2014

PURPOSE: The purpose of this study was to evaluate whether light-emitting diodes (LED) irradiation could be effective in a noninvasive, therapeutic device for the treatment of osteoarthritis(OA). METHODS: Twenty-four male Sprague-Dawley rats were divided into four groups: Vehicle control (saline); monosodium iodoacetate-injection (MIA); LED irradiation after MIA injection (MIA-LED); indomethacin-treatment after MIA injection (MIA-IMT). OA was induced by intra-articular injection of 3 mg MIA through the patellar ligament of the right knee. Vehicle control rats were injected with an equivalent volume of saline. The LED was irradiated for 15 min/day for a week after 7 days of MIA treatment. To compare with the effect of LED irradiation, the indomethacin was administrated 20 mg/kg twice a week orally after 7 days of MIA treatment. Knee joints were removed and fixed overnight in 10% neutral buffered formalin and decalcified by EDTA for 2 week before being embedded in paraffin. The assessment of OA induction were monitored by knee movement and radiographic finding. Histologic analysis were performed following staining with hematoxylin and eosin, safranin O-fast green, or toluidine blue, picrosirius red, and histologic changes were scored according to a modified Mankin system. Apoptotic cell in tissue sections was detected using TUNEL method. RESULTS: Radiographic examination could not show the differences between the MIA-treated and the MIA-LED-treated rats. In the histologic analysis, however, LED irradiation prevented cartilage damage and subchondral bone destruction, and significantly reduced mononuclear inflammatory cell infiltration and pannus formation. LED irradiation also reduced apoptosis of cartilage cells, but it prevented apoptosis of infiltrated inflammatory cells in synovium. In addition, LED irradiation showed an increase of collagen production in the meniscus. CONCLUSION: These results suggest that the 840 nm LED irradiation would be a suitable non-thermal phototherapy for the treatment of OA, as a cartilage protection and anti-inflammatory modality.

• Journal of Life Science
• /
• v.7 no.3
• /
• pp.192-197
• /
• 1997

Italian ryegrass, red clover, sorghum, and alfalfa were used for leaf protein preparation. Fresh leaves were pulped in the presence or absence of a reducing agent(sodium ascorbate or NaHSO$_{4}$) and green juice was heated and washed with acetone. The biological evaluation of leaf proteins was carried out by the growth method with male rats weighing about 45g. Italian ryegrass, red clover, and sorghum were brown when leaves were pulped in the absence of a reducing agent. On the other hand, alfalfa had neither o-diphenolics nor polyphenolase, and hence the alfalfa leaf protein did not brown during pulping ever in the absence of a reducing agent. The brown leaf protein from Italian ryegrass hd lower digestibility than the leaf protein protected from browning, although there were no difference in growth-promoting effect and protein efficiency ratio(PER)between the two leaf protein. The feeding of brown leaf protein from red clover resulted in the lowering of weight gain, digestibility, and PER, and all the measurement including diet intake were lowered by feeding the brown leaf protein from sorghum. In the case of alfalfa leaf protein, there were no difference in nutritional quality between the two leaf protein made with and without an attempt to prevent browning. The results mentioned above indicate that the occurrence of phenolics and polyphemolase in a crop in responsible for the browning of leaf protein and that the browning of leaf protein caused its nutritional impairment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.3
• /
• pp.285-294
• /
• 2011

This study was carried out in the Chungnam National University grassland experimental field from October, 2007 to December, 2009 in order to find out the growth characteristics of the wildflowers, the seasonal anthesis distribution of the wildflowers, and the botanical composition of the wildflowers which were altogether composed of 70% sheep fescue and 30% wildflowers. The experimental species contained 34 species in total to which sheep fescue (fundamental turfgrass), 4 native wildflowers, and 29 introduced wildflowers belonged. At the time of the anthesis of the wildflowers, the average length was 29.9 cm one year later and 38.4 cm two years later. They bloomed out into nine colors, but into one or three colors during August, September, and October. The blooming season leant toward May and June and from August there was lots of difficulty in the wildflower blooming and the maintenance of their consistency. Especially, at the age of two (2009) the color, seasonal distribution, and consistency emerged as problems owing to the reduction of annual wildflowers after winterization. The annual ration of wildflowers, sheep fescue, and weeds came to 25%, 61%, and 14% each one year later (2008) and 22%, 65%, and 13% each two years later (2009). Based on this result, cultivating wildflower grassland in the ratio of 70% (sheep fescue) to 30% (wildflowers) is the proper method not only for maintaining green space by sheep fescue, but also for commanding a fine view of wild flowers.

• Korean journal of food and cookery science
• /
• v.28 no.4
• /
• pp.489-497
• /
• 2012

This study was reviewed the changes in main ingredients, seasonings and cooking methods of Tangpyeongchae in Korean cook books and literatures published from the 1700s to the 1960s. The first published books about Tangpyeongchae were in Kosasibijib and Kyongdojabji, written in 1783 and the late 1700s, respectively. Tangpyeongchae, a representative traditional Korean dish that was royal cuisine offered at ritual events in the Chosun Dynasty, was called Cheongpochae in the royal court. It was a dish made by mixing cheongpomuk (mung bean gel), meat, dropwort, mung bean sprout, egg strips and laver. This dish has been seasoned with vinegar, soy sauce, black pepper, garlic, green onion, red pepper, salt, sugar, sesame oil and sesame salt since the early 1900s. Dropwort, egg strips, laver, pine nut (powder), red pepper powder, and red pepper threads were used as garnishes. Tangpyeongchae was made by mixing cheongpomuk with other ingredients and seasonings until the late 1800s. Since the early 1900s Tangpyeongchae has been seasoned first with other ingredients and then mixed cheongpomuk.