• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.5
• /
• pp.386-395
• /
• 2006

The core questions for determining nitrogen topdress rate (Npi) at panicle initiation stage (PIS) are 'how much nitrogen accumulation during the reproductive stage (PNup) is required for the target rice yield or protein content depending on the growth and nitrogen nutrition status at PIS?' and 'how can we diagnose the growth and nitrogen nutrition status easily at real time basis?'. To address these questions, two years experiments from 2001 to 2002 were done under various rates of basal, tillering, and panicle nitrogen fertilizer by employing a rice cultivar, Hwaseongbyeo. The response of grain yield and milled-rice protein content was quantified in relation to RVIgreen (green ratio vegetation index) and SPAD reading measured around PIS as indirect estimators for growth and nitrogen nutrition status, the regression models were formulated to predict PNup based on the growth and nitrogen nutrition status and Npi at PIS. Grain yield showed quadratic response to PNup, RVIgreen around PIS, and SPAD reading around PIS. The regression models to predict grain yield had a high determination coefficient of above 0.95. PNup for the maximum grain yield was estimated to be 9 to 13.5 kgN/10a within the range of RVIgreen around PIS of this experiment. decreasing with increasing RVIgreen and also to be 10 to 11 kgN/10a regardless of SPAD readings around PIS. At these PNup's the protein content of milled rice was estimated to rise above 9% that might degrade eating quality seriously Milled-rice protein content showed curve-linear increase with the increase of PNup, RVIgreen around PIS, and SPAD reading around PIS. The regression models to predict protein content had a high determination coefficient of above 0.91. PNup to control the milled-rice protein content below 7% was estimated as 6 to 8 kgN/10a within the range of RVIgreen and SPAD reading of this experiment, showing much lower values than those for the maximum grain yield. The recovery of the Npi applied at PIS ranged from 53 to 83%, increasing with the increased growth amount while decreasing with the increasing Npi. The natural nitrogen supply from PIS to harvest ranged from 2.5 to 4 kg/10a, showing quadratic relationship with the shoot dry weight or shoot nitrogen content at PIS. The regression models to estimate PNup was formulated using Npi and anyone of RVIgreen, shoot dry weight, and shoot nitrogen content at PIS as predictor variables. These models showed good fitness with determination coefficients of 0.86 to 0.95 The prescription method based on the above models predicting grain yield, protein content and PNup and its constraints were discussed.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.324-332
• /
• 1998

In order to standardize the chinese cabbage kimchi, the preparation method, kinds of ingredients and levels of the ingredients were determined by the statistical survey of literatures obtained from cooking books, scientific papers and kimchi manufacturing factory. The standardized ingredient kinds and ratio of chinese cabbage kimchi were $13.0{\pm}7.0$ of radish, $2.0{\pm}0.5$ of green onion, $3.5{\pm}0.8\;or\;2.5{\m}0.3$ of red pepper powder, $1.4{\pm}0.4$ of garlic, $0.6{\pm}0.3$ of ginger, $2.2{\pm}1.6$ of anchovy juice, and $1.0{\pm}0.3$ of sugar in the proportion of 100 salted chinese cabbage, and the final salt concentration was adjusted to 2.7% using salt. Red pepper powder level was quite different from the literature sources, so sensory evaluation, chemical properties and antimutagenic effect and growth inhibitory effect on human cancer cells of the kimchi samples were studied to decide the proper ratio of the red pepper powder as an ingredient. Red pepper powder 3.5% (average level for kimchi manufacturing factory) added kimchi was better in quality than red pepper powder 2.5% (average level for cooking books and scientific papers) added kimchi in sensory evaluation and chemical properties. The juice of red pepper powder 3.5% added kimchi showed not only the stronger antimutagenicity against aflatoxin $B_1$ in Salmonella typhimurium TA100 but also the higher inhibitory effect on the growth of AGS human gastric adenocarcinoma cells in SRB assay than that of red pepper powder 2.5% added kimchi. In conclusion, the standardized ratio of the ingredients was 13.0 radish, 2.0 green onion, 3.5 red pepper powder, 1.4 garlic, 0.6 ginger, 2.2 anchovy juice, 1.0 sugar, and 2.7 final salt concentration in the proportion of 100 salted chinese cabbage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this study is to propose plans to increase the number of urban parks as a way to help absorb carbon in order to implement the low carbon green city goals of Gangneung. As a study method, park incentive areas and current park areas were set as parameters and the areas of lacking in park space were categorized according to each indicator. The degree of park shortage was classified by overlapping the park shortage areas. Once the areas needing parks were assessed according to priority, target sites were selected on sites where construction would be actually possible. First, results of analysis showed that Songjeong-Dong and Seongdeok-Dong to the east of the target site lacking park space due to old residences and high population density or industrial use areas, were the most severe in the degree of park shortage. It was also shown that areas with high population density and park shortages included the Ponam-Dong, Okcheon-Dong and Hongje-Dong areas. Accordingly, the east side of the target areas and Hongje-Dong were both considered as high-priority areas needing to increase park space and actual possible target sites were selected for the creation of new, small parks in industrial areas by creating parks in school yards, in facility relocation sites and legal reviews. In addition, analysis indicators of park shortages were re-evaluated according to the securing of the park and it was shown that the problems in park shortages were resolved with the proper positioning of parks. In addition, satisfaction in the area of park per person, $3m^2$ was at a higher than a certain level in all areas except Songjeong-Dong, demonstrating that the park areas were evenly distributed. Areas of park shortage were shown in part of Songjeong-Dong and Seongdeok-Dong. This could be resolved by using alternative park resources such as the adjacent Gyeongpo Provincial Park, the beach and Namdaecheon.

• Clean Technology
• /
• v.20 no.3
• /
• pp.306-313
• /
• 2014

Nanoporous $TiO_2$ films are commonly used as working electrodes in dye-sensitized solar cells (DSSCs). So far, there have been attempts to synthesize films with various $TiO_2$ nanostructures to increase the power-conversion efficiency. In this work, vertically aligned rutile $TiO_2$ nanorods were grown on fluorinated tin oxide (FTO) glass by hydrothermal synthesis, followed by deposition of an anatase $TiO_2$ film. This new method of anatase $TiO_2$ growth avoided the use of a seed layer that is usually required in hydrothermal synthesis of $TiO_2$ electrodes. The dense anatase $TiO_2$ layer was designed to behave as the electron-generating layer, while the less dense rutile nanorods acted as electron-transfer pathwaysto the FTO glass. In order to facilitate the electron transfer, the rutile phase nanorods were treated with a $TiCl_4$ solution so that the nanorods were coated with the anatase $TiO_2$ film after heat treatment. Compared to the electrode consisting of only rutile $TiO_2$, the power-conversion efficiency of the rutile-anatase hybrid $TiO_2$ electrode was found to be much higher. The total thickness of the rutile-anatase hybrid $TiO_2$ structures were around $4.5-5.0{\mu}m$, and the highest power efficiency of the cell assembled with the structured $TiO_2$ electrode was around 3.94%.

• Radiation Oncology Journal
• /
• v.19 no.4
• /
• pp.319-326
• /
• 2001

Purpose : Planning target volume (PTV) for tumors in abdomen or thorax includes enough margin for breathing-related movement of tumor volumes during treatment. Depending on the location of the tumor, the magnitude of PTV margin extends from 10 mm to 30 mm, which increases substantial volume of the irradiated normal tissue hence, resulting in increase of normal tissue complication probability (NTCP). We developed a simple and handy method which can reduce PTV margins in patients with liver tumors, respiratory motion reduction device (RRD). Materials and methods : For 10 liver cancer patients, the data of internal organ motion were obtained by examining the diaphragm motion under fluoroscope. It was tested for both supine and prone position. A RRD was made using MeV-Green and Styrofoam panels and then applied to the patients. By analyzing the diaphragm movement from patients with RRD, the magnitude of PTV margin was determined and dose volume histogram (DVH) was computed using AcQ-Plan, a treatment planning software. Dose to normal tissue between patients with RRD and without RRD was analyzed by comparing the fraction of the normal liver receiving to $50\%$ of the isocenter dose. DVH and NTCP for normal liver and adjacent organs were also evaluated. Results : When patients breathed freely, average movement of diaphragm was $12{\pm}1.9\;mm$ in prone position in contrast to $16{\pm}1.9\;mm$ in supine position. In prone position, difference in diaphragm movement with and without RRD was $3{\pm}0.9\;mm$ and 12 mm, respectively, showing that PTV margins could be reduced to as much as 9 mm. With RRD, volume of the irradiated normal liver reduced up to $22.7\%$ in DVH analysis. Conclusion : Internal organ motion due to breathing can be reduced using RRD, which is simple and easy to use in clinical setting. It can reduce the organ motion-related PTV margin, thereby decrease volume of the irradiated normal tissue.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Korean journal of applied entomology
• /
• v.24 no.4 s.65
• /
• pp.223-230
• /
• 1986

A series of experiments were carried out to evaluate the differences in susceptibility of the 13-aphidicidial insecticides in the green peach aphids(Myzus persicae) collected from 13 different localities. The aphids were reared and increased on the potted tobacco plants in the laboratory. The susceptibility to insecticides was compared at the $LC_{50}$ levels with the resistant ratio by a leaf-dip method with a laboratory strain reared for 2 years in the laboratory without exposure to insecticides. The susceptibility to the insecticides was greatly varied with the local strains. The local strains demonstrated relatively high resistance to the insecticides over the laboratory strain at the $LC_{50}$ level; in resistant fold, 2.3 to 519.0 to cypermenthrin, 2.3 to 494.5 to decamethrin, 2.8 to 442.4 to fenvalerate, 2.5 to 170.6 to formothion, 1.5 to 494.5 to decamethrin, 2.8 to 442.4 to fenvalerate, 2.5 to 170.6 to formothion, 1.5 to 231.8 to phosphamidon, 3.1 to 42.1 to monocrotophos, 1.0 to 30.9 to phenthoate+dimethoate, 1.8 to 21.0 to heptanophos, 2.1 to 24.8 to oxydemeton-methyl, 1.0 to 24.9 to thiometon, 1.6 to 4.7 acephate, 0.8 to 4.1 to pirimicarb.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.375-382
• /
• 2015

The insecticidal activity of the constituents of cinnamon essential oils and structurally related compounds against both the nymphs and adults of the citrus flatid planthopper Metcalfa pruinosa was examined using a direct-contact application. The toxicity of the cinnamon oil constituents and 21 (E)-cinnamaldehyde related compounds regarding the nymphs of M. pruinosa was evaluated using a leaf-dipping bioassay. Based on 24 h $LC_{50}$ values, hydro-cinnamic acid ($1.55mg/cm^2$) is the most toxic compound, followed by geranic acid ($1.59mg/cm^2$). The $LC_{50}$ values of 11 of the compounds including cinnamaldehyde are between $1.60mg/cm^2$ and $4.94mg/cm^2$. Low toxicities and no toxicity were observed with the other 15 ($5.24mg/cm^2$ to $13.47mg/cm^2$) and two compounds, respectively. Also, the toxicities of the cinnamon oil constituents and 21 cinnamaldehyde related compounds regarding the M. pruinosa adults were evaluated using a direct-spray method. The toxicity of eugenol (10.81 mg) is the most toxic compound for the adults of M. pruinosa, followed by geranic acid (30.68 mg). The $LC_{50}$ values of nine of the compounds including cinnamaldehyde are between 59.16 mg and 96.70 mg. Low toxicities and no toxicity were observed with the other 15 (105.44 mg to 255.76 mg) and three compounds, respectively. The spray formulations that comprise cinnamon bark and cinnamon green leaf oils resulted in 82.3% and 82.9% mortalities, respectively, toward the M. pruinosa adults in a ginseng field. Global efforts to reduce the level of highly toxic synthetic insecticides in agricultural environments justify further studies on cinnamon oils to ascertain whether the corresponding active principles can act as insecticides, when they are applied as a direct spray with contact action, for the control of M. pruinosa populations.

• Korean journal of applied entomology
• /
• v.59 no.3
• /
• pp.233-241
• /
• 2020

Several hard tick species in Ixodidae are medically important pests that transmit infectious disease including severe fever with thrombocytopenia syndrome (SFTS). In Korea, the number of SFTS patients continues to steadily increase since its first report in 2013, and Gyeongsangbuk-do (province) is the second most frequent area of SFTS patient occurrence. In order to investigate the distribution of ticks in Sangju city, we collected ticks using the flagging method from 26 sites comprising urban green area, vulnerable area of management, and rural area, and examined SFTS virus from the collected ticks in 2019. Based on Collection Index (CI = tick number / 1 h / 2 people), CI 143 ticks, including Haemaphysalis longicornis, Haemaphysalis flava, and Ixodes nipponensis, were collected; the most abundant species among the three tick species was H. longicornis (CI 138, 96.5%). Ninety two percent (CI 131) of ticks were collected in vulnerable area of management, where people cannot easily enter and are not managed by city hall, whereas only 8.4% (CI 12) were collected in the urban green area and rural area. Regarding SFTS virus detection, virus was not investigated from 26 pools containing CI 143 ticks. The results of this study are expected to be used as a recommendation for ensuring the safety of local residents from tick-borne diseases.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.5
• /
• pp.73-81
• /
• 2008

The purpose of this study is to create a database of the use of landscape greenery that surrounds commercial buildings in Seoul. The method of this study was: to review preceding studies and related laws, survey areas, measure trees, and analyze the results. The 20 representative sites were specifically investigated to measure the width, direction, and environment of planting conditions. To analyze the greens adjacent to the building, the greens were divided into three types: front greenery, side greenery, and rear greenery. The study surveyed the distance from trees to adjacent buildings, and their planting conditions. The results of this study are as follows. First, 45% of the front greenery and 30% of the rear greenery were not established, but 19 of the 20 side greens were. Second, 13 of the 44 green areas adjacent to commercial buildings were under 1m in width. Most side greenery was belt -shape and unrelated to the features of the site or building. Third, the average distance from trees to buildings was 0.76m, indicating that most trees were planted too close to the buildings. Fourth, of the 30 trees utilized, the species breakdown was: 8 evergreen trees, 15 deciduous trees, and 7 shrubs. For the most part, planting patterns were similar for all species. Fifth, most sites were ill-suited to tree growth, because crown shape, planting conditions, and light conditions, etc., had not been considered. Based on these results, it is suggested that more specific, subdivided standards for planting conditions should be established. For example, building plans should include a green area that is at least one meter in width. In addition, according to the location and type(closing/opening) of the greenery adjacent to the buildings, suitable management programs and supervision protocol should be adopted.