• Title/Summary/Keyword: green method

Search Result 3,408, Processing Time 0.027 seconds

A Case Study on Energy Consumption and Calibration of Green Remodeling Buildings (그린리모델링 건물에 대한 에너지소비량 및 보정 사례연구)

  • Kim, Dongi;Lee, Byeongho
    • Journal of the Korean Solar Energy Society
    • /
    • v.40 no.5
    • /
    • pp.47-58
    • /
    • 2020
  • Ministry of Land, Infrastructure and Transport(MOLIT) has increased reduction rate from 18.1% to 32.7% in Building sector compared to BAU of the national greenhouse gas emission according to the 2030 Greenhouse Gas Reduction Road map Amendment. For this purpose, MOLIT has been activating the green remodeling projects for existing buildings. Considering that 15 year old buildings after completion are 74% (5.25 million buildings) among about 7 million existing building stocks in Korea, reduction of building energy consumption by green remodeling is urgently needed, However, it is a major difficulty of activation for green remodeling projects because there are few case studies on Before and After building energy consumption of actual green remodeling projects. Considering that building energy performance and value increase after green remodeling through previous researches, additional studies of the energy consumption assessment on actual green remodeling projects are essential. Therefore, this study aims to propose results on Before and After building energy consumption of actual green remodeling projects.

Sensory and Mechanical characteristics of Heunmi-nokcha-injulmi supplemented by Infused green tea powder (현미녹차인절미에 첨가한 우린 녹차가루량에 따른 Texture 특성)

  • 권미영
    • Journal of the Korean Home Economics Association
    • /
    • v.34 no.3
    • /
    • pp.233-243
    • /
    • 1996
  • The purpose of this study was to investigate effect of the amounts of unpolished glutinous rice flour with green tea powder difference of adding method on the sensorty and objective characteristics of Heunmi-nokcha-injulmi which is KOREAN TRADITIONAL CAKE supplemented with green tea. The results were as follow: According to sensory evaluation of Heunmi-injulmi adding twice infused green tea powder, the acceptance was the bast in the hardness, moistness, chewiness, and overall quality when adding 6% green tea. The more the amount of two infused green tea power was increased, the more the hardness of Heunmi-injulmi was increased in the gextural profiles, whereas the cohesiveness, elasticity, and chewiness of those was decreased. The moisture content of Heunmi-injulmi adding infused green tea powder was ranged to 41-44%, and it was decreased as the amount of two infusedgreen tea powder be increased. The more the amount of adding green tea powder was increased, the more yellow and green color was changed darker and stronger. The Overall quality in the sensory measurement of Heunmi-injulmi adding two infused green tea powder had positive correlation with Adhesiveness in the measurement of food testing machine. Refer to this study with the advisable recipe for Heunmi-nokcha-injulmi as follow : Heunmi-nokcha-injulmi adding 282g(94%) unpolished glutinous rice flour and 18g (6%) two infused green tea powder.

  • PDF

Factors Affecting of Environmental Consciousness on Green Purchase Intention: An Empirical Study of Generation Z in Vietnam

  • NGUYEN, Trong Luan;HUYNH, Minh Khang;HO, Nguyet Nuong;LE, Tran Gia Bao;DOAN, Nguyen Duy Hau
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.9 no.1
    • /
    • pp.333-343
    • /
    • 2022
  • Humans are facing many environmental challenges. Climate change, water pollution, global warming, and hazardous waste disposal are all issues that many countries throughout the world are dealing with. People's psychology and consumer behavior are significantly affected by these challenges, particularly generation Z, which is immediately affected by environmental changes. Young people have a strong sense of curiosity and have access to readily updated knowledge. Today's youth, in particular, live a civilized and responsible lifestyle. As a result, people recognize the significance of their own consumption behavior in affecting environmental change and are increasingly replacing them with green, ecologically friendly products as a fantastic method to mitigate their harmful consequences. In this research, there are four factors related to the young generation and environmental awareness that affect green consumption intention: perceived environmental responsibility, green knowledge, green attitude, and green product value. The goal of this study is to look into how detrimental environmental changes affect Generation Z's green consumption habits. This study used primary data from over 1000 people in the age group, which was processed using the AMOS 20 software. All the characteristics described above had an impact on Generation Z's green consumption intentions, according to the findings.

Constructability Analysis of Green Columns at the Low Bending Moment Zone

  • Lee, Sung-Ho;Park, Jun-Young;Lim, Chae-Yeon;Kim, Sun-Kuk
    • Journal of Construction Engineering and Project Management
    • /
    • v.3 no.4
    • /
    • pp.12-19
    • /
    • 2013
  • Green Frame is an environmentally friendly column-beam system composed of composite PC members that can increase buildings' life spans while reducing resource consumption. Typically, connections of PC and RC columns occur at the boundaries of each floor, which is at the upper section of slabs, causing the boundary of each floor to generate the maximum moment. Although it is not optimal in terms of structural safety to connect members at a location where the moment is high, this approach is highly adopted due to its constructability. We propose that a superior approach that employs the concept of connecting columns at the low bending moment zone can be applied to quickly and safely install green columns, the main structural members of Green Frame. Connection of green columns at the low bending moment zone can be classified into three techniques, depending on the method of reinforcing the joints, which have different connection characteristics and construction methods. Research is needed to compare the features of each method of reinforcing the joints so that the most appropriate column connection method can be chosen for the site conditions. This study aims to confirm the structural safety of the connection component at the low bending moment zone and to compare and analyze the construction duration, unit price, quality and safety performance of each column connection method. The study results are anticipated to activate the use of composite precast concrete and to be used as development data in the future.

The Method of Green Data Center to Improve the Power Efficiency (에너지 효율화를 위한 그린 데이터센터 도입방안)

  • Choi, Young-Jin;Moon, Sung-Jun;Kim, Jin-Hwan;Kim, Sung-Han;Shin, Il-Sup;Kim, Ki-Byoung
    • Journal of Digital Convergence
    • /
    • v.8 no.3
    • /
    • pp.181-197
    • /
    • 2010
  • Recently, energy saving is a important concern. IT fields, also, are try to reduce the electricity during the IT service, that links to green IT. Especially, green data center is a hot issue, because there are many new projects to build large data center, that spends huge electricity. Even though there are many new projects, the process to build the green data center is not arranged. That depend on the personal experience during the data center construction. Especially, cooling is complex and many problem to reduce the electricity. So, this research provides the method, that is consisted of tasks, activities, and guideline to build the green data center.

  • PDF

The Fabrication and Properties of Lead-tree Transparent Dielectric Thick Films for PDP (PDP 무연 투명유전체 후막의 형성 및 특성)

  • Heo, Sung-Cheol;Choi, Duck-Kyun;Oh, Young-Jei
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.17 no.10
    • /
    • pp.1107-1113
    • /
    • 2004
  • Dry film method for large size of PDP(Plasma Display Panel) module has been actively investigated. This method for lead-free transparent dielectric formation depends on green sheet technology. By adjusting the composition of transparent dielectric powders and organics, uniformly dispersed slurry was fabricated, Viscosity of the slurry exhibited pseudoplastic behavior for tape casting, Cast green sheets were tested under tensile condition at room temperature. It was found that the increase in transparent dielectric powder and binder ratio leads to decrease in strain to failure of green sheets from 120 % to 34 % and from 255 % to 4 %, respectively. Tensile strength of green sheets decreased abruptly with increase of transparent dielectric powder ratio, with minimum at 0.13 MPa. On the other hand, tensile strength increased continuously from 0.1 MPa to 2.4 MPa with increase of binder ratio. The green sheets were attached on the glass substrate and heated by following firing schedule. As a result, the best result was obtained when fired at 580 $^{\circ}C$ for 15 min and had transmittance of 78 % in visible range 550 nm.

Evaluation on the Environment Amelioration Functions of Green Spaces in Chongju City by GIS (지리정보체계를 이용한 청주시 녹지의 환청개선 기능 평가)

  • Koh, Kang Suk;Suh, Min Hwan;Kim, Jung Hyun;Kim, Kee Dae;Kil, Ji Hyun;Kim, Jeong Soo;Lee, Myung Woo
    • Journal of Environmental Impact Assessment
    • /
    • v.8 no.1
    • /
    • pp.51-59
    • /
    • 1999
  • This study was conducted to evaluate the functions of green spaces for the environment amelioration in Chongju City. The results obtained from this study were as follows; 1. Total amounts of $SO_2$ and $NO_2$ which can be absorbed by green spaces in Chongju City from EPA model were calculated as 27,655 tons and l,551 tons per year, respectively. 2. It was estimated that more green spaces were needed to mitigate the effect of air pollutants emitted from industrial complex at Songjung-Dong, Bokdae-Dong and Sachang-Dong in Chongju City. This is acquired as a result of overlaying the map of administrative district, forest state, and $SO_2$ isoline using GIS method. 3. The amounts of green spaces and the selection of their proper location have to be considered at the stage of city planning and in this case, the amounts of air pollutants are also considered.

  • PDF

Accurate Determination of Malachite Green and Leucomalachite Green in Fish using Isotope Dilution Liquid Chromatography/Mass Spectrometry (ID-LC/MS)

  • Ahn, Seong-Hee;Kim, Byung-Joo;Lee, Yun-Jung;Kim, Jeong-Kwon
    • Bulletin of the Korean Chemical Society
    • /
    • v.31 no.11
    • /
    • pp.3228-3232
    • /
    • 2010
  • Malachite green (MG) has been used world-widely in aquaculture as a parasiticide or fungicide. Although MG performed successfully, it has not been permitted for use in aquaculture from European Union, USA, and Canada because of its carcinogenicity and mutagenicity. We developed a sensitive and specific method to determine MG and its principal metabolite, leucomalachite green (LMG), respectively by isotope dilution liquid chromatography mass spectrometry (ID-LC/MS). To enhance the extraction recovery of MG and LMG from fish tissue, an additional step, saponification, was introduced in sample preparation process to remove fat in sample extract, which hampered the performance of SPE columns. The residue of MG and LMG in fish was analyzed using liquid chromatography mass spectrometry in the selected ion monitoring (SIM) mode by monitoring at m/z 329 and 334 for MG and $d_5$-MG and at m/z 331 and 337 for LMG and $^{13}C_6$-LMG, respectively. This method was validated by comparing with the value of the reference material provided by Laboratory Government Chemistry (LGC). The results agreed within the measurement uncertainty and the accuracy was much improved than the provided reference value by LGC.

A Standard Test Methods of Resistance to Root Penetration for Waterproofing and Rootproofing Membrane Using Green Roof System (인공지반녹화용 멤브레인 방수 및 방근재료의 방근성능 평가 방법 제안 연구)

  • Lee, Jung-Hoon;Seon, Yun-Suk;Kwak, Kyu Sung;Oh, Sang-Keu
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2009.11a
    • /
    • pp.141-148
    • /
    • 2009
  • The purpose of this paper is to propose a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. Green roof system is considered to be an important subject in construction industry for green growth project. At the same time, we have to consider the counterplan for protection the damage of waterproofing layer and concrete substrate from the penetration of plant root. But many kinds of materials for protection from root penetration are using in construction field. But the performance of those materials is not clear, and there is not test methods for the evaluation of performance. So in this paper, based on the research results of 4 institutes during four years and foreign cases, we made a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. This test method deals with about environmental condition of laboratory, experimental facilities, kinds of plant, specimen of test, management methods, evaluation duration and documents, etc.

  • PDF

Utilization of Bamboo Leaves as a New Resource of Natural Green Colorants

  • Shin, Younsook;Cho, Arang;Yoo, Dong Il
    • Textile Coloration and Finishing
    • /
    • v.24 no.4
    • /
    • pp.247-252
    • /
    • 2012
  • The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.