• Journal of Biomedical Engineering Research
• /
• v.42 no.3
• /
• pp.116-124
• /
• 2021

It is important to differentiate between the target tissue (or organ) and the rest of the tissue before incision during surgery. And when it is necessary to preserve the differentiated tissues, the blood vessels connected to the tissue must be preserved together. Various non-invasive medical imaging methods have been developed for this purpose. We aimed to develop a medical imaging system that can simultaneously apply fluorescence imaging using indocyanine green (ICG) and laser speckle contrast imaging (LSCI) using laser speckle patterns. We designed to collect images directed to the two cameras on a co-axial optical path and to compensate equal optical path length for two optical designs. The light source used for fluorescence and LSCI the same 785 nm wavelength. This system outputs real-time images and is designed to intuitively distinguish target tissues or blood vessels. This system outputs LSCI images up to 37 fps through parallel processing. Fluorescence for ICG and blood flow in animal models were observed throughout the experiment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.532-534
• /
• 2000

Si thin films on p-type (100) Si substrate have been fabricated by pulsed laser deposition technique using a Nd:YAG laser. The pressure of the environmental gas during deposition was varied from 1 to 3 Torr. After deposition, Si thin film has been annealed again at nitrogen ambient. Strong violet-indigo photoluminescence have been observed from Si thin film annealed in nitrogen ambient gas. As increasing environmental gas pressure, weak green and red emissions from annealed Si thin films also observed by photoluminescence.

• Korean Journal of Acupuncture
• /
• v.27 no.1
• /
• pp.125-142
• /
• 2010

Objectives: The purpose of this study was to identify the effectiveness of neuronal activities for the acupuncture and laser acupuncture application. Methods: The subject were divided into 7 groups as control group without acupuncture, acupuncture treatment with tonify manipulation with the direction of channel at HT9, LR1(AT-A), acupuncture treatment with purge manipulation against the direction of channel at HT3, Kl10(AT-B), acupuncture treatment with tonify manipulation with the direction of channel at HT9, LR1 and purge manipulation against the direction of channel at HT3, KI10(AT-C), laser acupuncture treatment with red light 658 nm at HT9, LR1(LAT-A), laser acupuncture treatment with green light 532 nm at HT3, KI10(LAT-B), laser acupuncture treatment with red light 658 nm at HT9, LR1 and green light 532 nm at HT3, KI10(LAT-B). Antiapopotic effect of acupuncture was observed by Bax, Bcl-2 and cytochrome C. Neuroprotective effect of acupuncture was observed by cresyl violet and ChAT. Results: AT-A, AT-B, AT-C, LAT-A, LAT-B and LAT-C groups were significantly increased comparing the control groups in expression ChAT and in neuroprotective effect by cresyl violet. AT-A, AT-B, AT-C, LAT-A, LAT-B and LAT-C groups were significantly decreased comparing the control groups in expression Bax. AT-C, LAT-A, LAT-B and LAT-C groups were significantly increased comparing the control groups in expression Bcl-2. AT-A, AT-B, AT-C, LAT-A, LAT-B and LAT-C groups were significantly decreased comparing the control groups in Bax/Bcl-2 ratio. LAT-B and LAT-C groups were significantly decreased comparing the control groups in expression cytochrome C. Conclusions: The acupuncture with tonify and purge manipulation and laser acupuncture with red and green light could be effective for antiapopotic and neuroprotective effect in focal brain ischemia.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.183-188
• /
• 1997

Cut-off filters would reject all the radiation below and transmit all that above a certain wavelength or vice versa. In this paper, we study design and farbrication of dichroic mirror and broadband high reflective mirror for color separation of white laser beam source to R.G.B color beam source. In laser display system, color separation is very important. We fabricated below specific component for finite color separation of the Kr-Ar laser source. At 45$^{\circ}$ incidence s-polarized light , it is required that - H/R in blue region R>99%, H/T in green and red region T>90% - H/R in green and red region R>99%, H/T in blue region T>90% - H/R in green region R>99%, H/T in red region T>90% We composed the optical system and realize the full color image.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.113-116
• /
• 2008

A 532 nm Nd-YAG laser was applied to crystallize amorphous Si thin films in order to evaluate the applicability of a Nd-YAG laser to low-temperature polycrystalline Si technology. The irradiation of a green laser was controlled during the crystallization of amorphous Si thin films deposited onto glass substrates in a sophisticated process. Raman spectroscopy and UV-Visible spectrophotometry were employed to quantify the degree of crystallization in the Si thin films in terms of its optical transmission and vibrational characteristics. The effectiveness of the Nd-YAG laser is suggested as a feasible alternative that is capable of crystallizing the amorphous Si thin films.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.9-16
• /
• 2009

In this paper, the coaxial monitoring system to capture image of weld pool was developed in laser-arc hybrid welding. In order to obtain the reliable image, green laser was used as a illumination system and measuring components such as band pass filter, ND (Neutral Density) filter and shutter speed was designed and optimized. Using this monitoring system, weld pool images were captured according to laser power, welding speed, welding current and interspace between laser and arc through the experiment. ANOVA (Analysis of Variation) was carried out to identify the influence of process variables on bead widths extracted from captured images of monitoring system. Welding speed and current were major factor to affect weld pool.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.36-40
• /
• 2017

In this paper, a new method of laser trimming of thick film heater is studied. Various laser waves (IR, Green, UV) are used to ablation the heater and the process parameters are also presented. For given initial printed resisters, the cutting length should be prepared to obtain the target resister value in advance. Therefore, the cutting model is very important. The well-known model was tested and proven that it is valid only within a certain range of cutting length. A new model is proposed for a wide range of resister laser trimming. The cutting lengths and resister variation was obtained and formulated. To verify the presented method, the cutting lengths of each resister are calculated for various target resister value and laser trimming using UV is conducted.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.213-217
• /
• 1997

AOhf(Hcousto-r)l)tic niodulator) with :!OOlIiz freclucncl- and Sfi(;(Seconrl harmonic generation) green lasel-Lvith 53% nm wavelength were used for Il\'IIII~Dii.it,ii v~ilco disk recorder) FOI rhe appli~aptin of high densit]. optical recording, a high po\ver I ~ c r is r c ~ ~ l i ~ i l - u l ic I !tic. s\-sti,m a n d optic.,~I io;iting l,t)c>rs of each optical device must have a high laser damage threshoid hie rn;itie ant] retlwtive coatings on a $TeO_{2}$ singlc crystal. which is used as an acoustooptic material, by E-beam evaporation method. Laser damage threshold \vas nicdsureci hy Ar laser with the input power oi 0.55LV 1,aser damage threiholti 01 $ZrO_{2}$ and $SiO_{2}$. filn-is were higher than $AI_{2}O_{3}$ f i l m U'e also investigated a long--tern1 stability of the output po\ver of St{(; green laser

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• v.5 no.5
• /
• pp.593-604
• /
• 2018

Laser-assisted machining (LAM) is known to be an effective and economical technique for improving the machinability of difficult-to-machine materials. In the LAM method, material is preheated using a laser heat source and then the preheated area is removed by following cutting tool. For laser-assisted turning (LAT), the configuration of the system is not complicated because laser irradiates from a fixed position. In contrast, laser-assisted milling (LAMill) system is not only complicated but also difficult to control because laser heat source must always move ahead of the cutting tool along a three dimensional (3D) tool path. LAMill is still early stage and cannot yet be used to machine finished products with 3D shapes. In this study, a laser-assisted fillet milling process was developed for machining 3D shapes. There are no prior studies combining fillet milling and LAMill. Laser-assisted fillet milling strategy was proposed, and effective depth of cut (EDOC) was obtained using thermal analysis. Experiments were designed using response surface method and cutting force prediction equations were developed using statistical analysis and regression analysis. The optimum machining conditions were also proposed, and energy efficiency of the LAMill was analyzed by comparing the specific cutting energy of conventional machining (CM) and LAMill.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.246-250
• /
• 2001

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of355 nm. In order to investigate the emission properties of ZnO thin films, Pl measurements with an Ar ion laser a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited Pl bands centers around 390, 510 and 640 nm, labeled near ultra-violet(UV), green and orange bands. Structural properties of ZnO thin films are analyzed with X-ray diffraction(XRD).