• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.583-589
• /
• 2020

Recently, the utility of UAS (Unmanned Aerial System) for a smart farm using various sensors and ICT (Information & Communications Technology) is expected. In particular, it has proven its effectiveness as an outdoor crop monitoring method through various indices and is being studied in various fields. This study analyzes damage to crops caused by natural disasters and measures the damage area of rice plants. To this end, data is acquired using BG-NIR (Blue Green_Near Infrared Red) and RGB sensors, and image analysis and NDWI (Normalized Difference Water Index) index performed to review crop damage caused by in the rainy season. Also, point cloud data based on image analysis is generated, and damage is measured by comparing data before and after the typhoon through an inspection map. As a result of the study, the growth and rainy season damage of rice was examined through NDWI index analysis, and the damage area caused by typhoon was measured by analysis of the inspection map.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2261-2270
• /
• 2015

GIS(Geographic Information System) based Positioning technique uses geographic information to predict which satellites are visible or invisible. GPS positioning has poor positioning accuracy in dense urban area where tall buildings block the satellite signals. In this paper, we proposed GIS based Advanced Positioning technique of Mobile GPS to resolve this problem. Particularly, this technique improves positioning accuracy in dense urban area. It is consist of ephemeris and GIS server. We will inversely estimate pseudorange by using NMEA-0183 output data of mobile GPS. After that, we can find more accurate position by using ephemeris and GIS information.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.45-50
• /
• 2014

In this paper, broadband wireless smart city network coverage was implemented targeting a city (Wonju) using the wireless mesh network. Through this, we could provide wireless network that can easily add network and be repaired easily and have high economic effect. In order to implement broadband wireless smart city network coverage, wireless mesh network has been designed through pre-survey of the region and appropriate selecting of equipment. In addition, the designed network is examined, evaluated and compared with existing network though simulation. The aim of this paper is to prove high cost saving effect of wireless mesh network and its superior performance and to suggest future oriented integrated network of Green IT though research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1059-1068
• /
• 1993

We will put the emphasis on the analysis of arbitrarily shaped microstrip antennas. The most general and rigorous treatment of microstrip antennas is given by the electric field integral equation(EFIE), usally formulated in the spectral domain. In this paper, we use a modification of EFIE, called the mixed potential integral equation(MPIE) , and we solve it in the space domain. This technique uses Green's functions associated with the scalar and vector potential which are calculated by using stratified media theory and are expressed as Sommerfeld integrals. The integral equation is solved by a moment's method using rooftop subsectional basis function. Thus, microstrip patches of any shape can be analysed at any frequency and for any substrate. Numerical results for a rectangular patch and for a L-shaped patch are given and compared with measured values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1256-1265
• /
• 1996

Soft-decision detectors are used in many FEC and ARQ schemes to enhance the bit-error-probability and system throughput. Also, the hybrid-ARQ protocol is a very efficient schemeto achieve overall performance improvement. In this paper, we propose a new hybrid-ARQ protocol based on the first-order Reed-Muller codes employing soft-decision detectors. The Reed-Muller codes have the virtue of being able to use the fast Green machine decoder that is simple to implement. As the performance measures, the bit-error-probability and system throughput are evaluted for the proposed hybrid-ARQ procol, and compared with those of other hybrid-ARQ schemes. It is shown that the use of the proposed hybrid-ARQ protocol results in significant performance improvement without causing much loss in view of system complexity.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.140-149
• /
• 2010

Green communication is a new paradigm of designing the communication system which considers not only the processing performance but also the energy efficiency. Power control management is one of the approaches in green communication to reduce the power consumption in distributed communication system. In this paper, we propose improved power control schemes for mobile satellite systems with ancillary terrestrial components (ATCs). In order to increase system capacity and reduce the transmitting power of the user's equipment, we propose an efficient channel estimation method consisting of a modified open-loop power control (OLPC) and closed-loop power control (CLPC). The OLPC works well if the forward and reverse links are perfectly correlated. The CLPC is sensitive to round-trip delay and, therefore, it is not effective in a mobile satellite system. In order to solve the above problem, we added monitoring equipment to both the OLPC and CLPC to use information about transmitting power that has not yet been received by the receiver over the satellite/ATC channel. Moreover, we adapted an efficient pilot diversity of both OLPC and CLPC in order to get a better signal to interference plus noise ratio estimation of the received signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.2
• /
• pp.181-186
• /
• 1992

The scattering property of TMz illuminated perfectly conducting and dielectric cylinders of arbitrary cross section are analyzed by the boundary element techniques. The boundary element equations are formulated via Maxwell’s equations, weighted residual or Green’s theorem, and the boundary conditions. The unknown surface fields on the boundaries are then calculated by the boundary element integral equations. Once the surface fields are found, the scattered fields in from a perfectly conducting circular and elliptic cylinders, a dielectric circular and elliptic cylinders are numerically analyzed. A general computer program has been developed using the quadratic elements(higher order boundary elements) and the Gaussian quadrature.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.610-618
• /
• 2016

A green cognitive radio network (CRN), characterized by base stations (BSs) that conserve energy during sleep periods, is a promising candidate for realizing more efficient spectrum allocation. To improve the spectrum efficiency and achieve greener communication in wireless applications, we consider CRNs with an long term evolution advanced (LTE-A) structure and propose a novel energy-saving strategy. By establishing a type of preemptive priority queueing model with a single vacation, we capture the stochastic behavior of the proposed strategy. Using the method of matrix geometric solutions, we derive the performance measures in terms of the average latency of secondary user (SU) packets and the energy-saving degree of BSs. Furthermore, we provide numerical results to demonstrate the influence of the sleeping parameter on the system performance. Finally, we compare the Nash equilibrium behavior and social optimization behavior of the proposed strategy to present a pricing policy for SU packets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1034-1042
• /
• 2010

As many researchers have been interested in Green IT, Energy Efficient Ethernet(EEE) with rate adaptation has recently begun to receive many attention. However, the rate adaptation scheme can have different energy efficiency and delay according to the characteristics of various traffic patterns. Therefore, in this paper, we analyze the impact of different traffic patterns on the energy efficiency and delay in Ethernet with rate adaptation. To do this, firstly we design a rate adaptation simulator which consists of Poisson based traffic generator, Pareto distribution based ON-OFF generator and Ethernet node with rate adaptation by using OPNET Modeler. Using this simulator, we perform the simulation in view of the total number of switching, transmission rate reduction, energy saving ratio and average queueing delay. Simulation results show that IP traffic patterns with high self-similarity affect the number of switching, rate reduction and energy saving ratio. Additionally, the transition overhead is caused due to the high self-similar traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1091-1097
• /
• 2010

Energy and environment problem has been arisen and become one of the major concerns all over the world, due to scarce energy resources and inefficient energy consumption. Recently, energy-IT(EIT) convergence technology has been getting more attention, being expected to be one of key technologies to resolve the problem, and R&D projects on various areas of EIT convergence technologies have been launched in many countries on a large scale. Korea government and companies have also been interested in the development of EIT technologies, however, the scopes of technology areas are limited to just a small part such as smart grid technology. This paper investigates effectiveness of each EIT convergence technology and deduces EIT convergence technologies using AHP(Analytic Hierarchy Process). It is expected that our research could be meaningful information supporting policies on R&D projects of EIT convergence technologies promoted to save energy and strengthen the national competitiveness. Our research results show that the EIT convergence technology area of green building would be the most effective EIT convergence technology except smart grid, and network-based energy management system would be the most effective amongst the sub-areas of green building.