• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.449-459
• /
• 2012

Fruit borers such as Grapholita molesta, G. dimorpha and Carposina sasakii are major pests of plum in Korea. Population densities and seasonal occurrence were monitored using the synthetic sex pheromone trap in Uiseong and Gyeongsan, two important major plum growing area in Korea. In 2010 and 2011, adults of G. molesta were caught from mid April with the peak of late April, and then undergone three more generations in Gyeongsan. Grapholita dimorpha appeared from late April and they showed three peaks until late September. Both Grapholita species occurred a few days later in Uiseong than in Gyeongsan where the latitude is $1^{\circ}$ lower. There was no difference of the phenological occurrence of C. sasakii between Gyeongsan and Uiseong, showing the same patterns of two or three peaks. Population size was in order of G. molesta, G. dimorpha and C. sasakii with 63:16:20 and 47:35:18 in Gyeongsan and 51:18:31 and 46:13:36 in Uiseong, in 2010 and 2011 respectively. There was no difference between the numbers of Grapholita species caught in the trap installed inside and outside of the orchards.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.148-157
• /
• 2012

Recently, people are getting more interested in green energy resource and environment friendly energy resource due to the lack of energy and global warming. This study produced a solar energy resource map using LiDAR(Light Detection And Ranging) data to check if it is utilized for spatial information technology and solar energy sectors that people pay more attentions to as new recycling energy. This study assigned Ulleungdo(Island) located in Gyeongsangbuk-do as a target area. This study created the contour line with 1 meter by newly photographing LiDAR and data processing. And using this contour line, this study built DEM(Digital Elevation Model) data with 1 meter. The incidence range depending on the altitude and azimuth of sun using DEM data is used to evaluate solar energy resource. This is expected to suggest an accurate method to evaluate more reliable and more precise information of new recycling energy resource by producing solar energy resource map based on accurate and precise spatial resolution data with 1 meter level.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2012

We studied that the effect of stocking density on growth and survival rate of the scallop, Chlamys farreri (initial shell height 32.97 mm and total weight 5.63 g) from June 2002 to October 2003 in the west coast of Korea. C. farreri is usually the west coast of Korea and northern China in the natural habitat of the coastal species. Range of surface water temperature in the study area was $4.3^{\circ}C$ to $25.3^{\circ}C$, salinity 29.2 psu to 32.1 psu, dissolved oxygen 5.32 mg/L to 7.51 mg/L and pH was 7.84 to 8.12, respectively. The stocking densities were 20, 30, 40 and 50 individuals per a compartment of suspension cage in culture beginning. After 16 months from initiation, ranges of shell height and mean total weight were from 64.35 mm to 76.23 mm and from 41.53 g to 64.85 g. The survival rate was from 82% to 100%. The growth rate of the scallop was negatively correlated with the stocking density. The growth of the shell height and total weight were decreased with decreasing of water temperature. Most of mortality of scallop occurred during March to April and September to October. Survival rate in the stocking density was decreased by density increase and was highest in 20 individual a compartment.

• Structural Engineering and Mechanics
• /
• v.55 no.4
• /
• pp.857-869
• /
• 2015

The aluminum 7075-T6 is known as an alloy widely used in aircraft structural applications, which does not exhibit strain rate sensitivity during dynamic compressive tests. Despite mechanical importance of the material, there is not enough attention to determine appropriate sample dimensions such as a sample diameter relative to the device bar diameter and sample length to diameter (L/D) ratio for dynamic tests and how these two parameters can change mechanical behaviors of the sample under dynamic loading condition. In this study, various samples which have different diameters of 31.8, 25.4, 15.9, and 9.5 mm and sample L/D ratios of 2.0, 1.5, 1.0, 0.5, and 0.25 were tested using Split Hopkinson Pressure Bar (SHPB), as this testing device is proper to characterize mechanical behaviors of solid materials at high strain rates. The mechanical behavior of this alloy was examined under ${\sim}200-5,500s^{-1}$ dynamic strain rate. Aluminum samples of 2.0, 1.5 and 1.0 of L/D ratios were well fitted into the stress-strain curve, Madison and Green's diagram, regardless of the sample diameters. Also, the 0.5 and 0.25 L/D ratio samples having the diameter of 31.8 and 25.4 mm followed the stress-strain curve. As results, larger samples (31.8 and 25.4 mm) in diameters followed the stress-strain curve regardless of the L/D ratios, whereas the 0.5 and 0.25 L/D ratios of small diameter sample (15.9 and 9.5 mm) did not follow the stress-strain diagram but significantly deviate from the diagram. Our results indicate that the L/D ratio is important determinant in stress-strain responses under the SHPB test when the sample diameter is small relative to the test bar diameter (31.8 mm), but when sample diameter is close to the bar diameter, L/D ratio does not significantly affect the stress-strain responses. This suggests that the areal mismatch (non-contact area of the testing bar) between the sample and the bar can misrepresent mechanical behaviors of the aluminum 7075-T6 at the dynamic loading condition.

• Hwankyungkyoyuk
• /
• v.19 no.1 s.29
• /
• pp.1-13
• /
• 2006

This study was aimed to explore the level of awareness of Korean teachers and college students towards sustainable development(SD) and education for sustainable development(ESD). A survey was conducted to understand the present status of awareness of SD and ESD among 317 college students and 625 teachers in Korea from April to May of 2005. The questionnaire included items asking whether they heard about terms such as sustainability or sustainable development, the source of information on SD, the level of understanding or the urgent task for SD in Korea. It also included questions about experiences in participating in or conducting ESD, the need for ESD, important areas in and the modality for ESD and the willingness to participate in ESD. The results showed that the level of awareness on SD among teachers was low compared to college students, who have a relatively high level of access on SD issues through textbooks and classes in high school. Interestingly, most of college students replied that they never received any ESD, even though they learned SD in class. Both the teacher and student group thought that tile priority of sustainable development should be an 'environment-related' area in the social, economical and environmental perspectives. Most of the students and teachers considered the concept of SD as 'pursuing the balance between environmental protection and economic development.' Some of the teachers recognized the concept of sustainable development in the paradigm of continuous economic development. Both groups responded that the urgent task related to sustainable development is 'environmental protection' and the 'reduction of poverty.' On the other hand, they had experiences in teaching related to natural resources, gender equity, health, human rights, climate changes and other SD issues in class, but not under the name of ESD. They also emphasized 'critical thinking and problem solving & decision-making' in education. Most of the students and teachers responded that it was needed to carry out ESD, and that the way of life for SD would be the priority. It is suggested that various pedagogy and modalities according to various target groups should be considered in providing ESD. It is necessary to use more effective strategies for ESD rather than just introducing the concept of SD. Also, it is needed to review the ESD practices of teachers and improve the quality of education within the scope of ESD.

• Journal of Marine Bioscience and Biotechnology
• /
• v.8 no.1
• /
• pp.18-23
• /
• 2016

It is important to design photobioreactor by cheap material for economical microalgal biomass production. In this study, two types of marine photobioreactors (MPBR), made by either polyvinyl chloride (MPBR-PVC) or high density poly ethylene (MPBR-HDPE), are used and performance of these were compared. Tetraselmis sp. KCTC 12236BP is a green marine alga that isolated from Ganghwa Island, Korea, and the strain was used for marine cultivations using MPBR-PVC and MPBR-HDPE. The cultivations were performed three times in the spring season of 2012 using MPBR-PVC and of 2013 using MPBR-HDPE in the coastal area of Young Heung Island. As the results, MPBR-PVC shows higher biomass productivities than MPBR-HDPE, due to its high light transmittance. In the cultivations using MPBR-PVC, the average sea water temperature was $11.5^{\circ}C$ during the first experiment and $16.5^{\circ}C$ during the second and third experiments. Average light intensities during three times for experiments were 407.5, 268.1 and $273.0{\mu}{\cdot}E{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The maximum fresh cell weight and average biomass productivity were $1.2g{\cdot}L^{-1}$ and $0.12g{\cdot}L^{-1}{\cdot}day^{-1}$. These results showed that Tetraselmis sp. KCTC12236BP were adapted well with the environmental conditions from ocean, and grow in the MPBR-PVC and MPBR-HDPE.

• Journal of Families and Better Life
• /
• v.28 no.6
• /
• pp.35-46
• /
• 2010

The purpose of the study was to identify the potential buyers' consciousness of single-family housing to provide useful data to help future single-family housing supplies in Ulsan. The study selected residents in Ulsan, who were over twenty and had an interest in living in a single-family housing. A survey was conducted from September 11, 2008 to September 25, 2008. The sample consisted of 364 persons who are currently live in Ulsan metropolitan area. The results are as following. About two thirds of the sample had the desire to live in a single-family housing. Moving into a single-family housing had financial preparation as the greatest issue. When moving into a single-family housing, the convenience of the residential district was the greatest consideration, whether or not it is a green environment, pollution level, etc. The potential buyers valued environment-friendly features and also had a very strong desire to own their own house. Many of them wanted to design and build their own single-family housing within a budget of 100-200 million KRW. In terms of the location, there was a higher preference for the riverside or lakeside rural areas outside the city. In terms of size, the preference was less than $330m^2$, which includes $99-132m^2$ for residential. When considering a single-family housing the direction was the most important feature, along with eco-friendly and safer materials and equipments. When building the single-family housing the potential buyers considered the community spaces first with a preference for having three bedrooms and two bathrooms. For the exterior, they wanted a unique shape of roof and there were high preferences for brown and beige colors. In terms of housing complexes, the potential buyers preferred individual unit types over complexes. If they preferred housing complexes, they wanted the cluster form complex with about 10-30 units. The complex also required a park-like setting with a guard system, which shows that convenience and safety were the most important features. In terms of complex management, they considered environmental management as the most important feature. The potential buyers were willing to pay belw 200,000 KRW, which showed their desire to minimize financial burdens.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.807-810
• /
• 2011

The sensor network technology for core technology of ubiquitous computing is in the spotlight recently, the research on sensor network is proceeding actively which is composed many different sensor node. USN(Ubiquitous Sensor Network) is the network that widely applies for life of human being. It works out to sense, storage, process, deliver every kind of appliances and environmental information from the stucktags and sensors. And it is possible to utilize to measure and monitor about the place of environmental pollution which is difficult for human to install. It's studied constantly since it be able to compose easily more subminiature, low-power, low-cost than previous one. And also it spotlights an important field of study, graft the green IT and IT of which the environment and IT unite stragically onto the Network. The problem for the air pollution in the office or the indoor except a specific working area is the continuously issue since the human beings have lived in the dwelling facilities. Measures for that problem are urgently needed. It's possible to solve for the freshair of outside with enough ventilation but that is the awkward situation to be managed by person. This study is the system engineering to management for indoor air condition under the sensor network. And research for efficiently manage an option.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.184-191
• /
• 1989

The effect of various supplementary light sources on the agronomic characteristics has been investigeted for generation acceleration of barley in green house with the condition of 15$^{\circ}C$ and 8 hrs. day light followed by each supplementary light sources including incandescent electric lamp (IN), Blue fluorescent lamp(BF). day-light fluorescent lamp(DF), Biolux lamp(BL), BL+BF, In+BF and IN+BL. Leaf number of main stem, leaf area, culm length, dry matter yield of shoot, number of grain per spike, grain yield per plant were most sharply decreased with the exposition of IN, while flag-leaf emergence on main stem and I, 000 grain weight were earlist and heavist respectively with the exposition of IN. In appeared to be best light source for shortening the days to heading, but IN + BF will be most desirable light source with considering both days to heading and adequate yield at the same time.