• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.261-266
• /
• 2022

Notably, laser surface patterning facilitates tribological applications under lubricated sliding contacts. Consequently, a special pattern that can reduce the coefficient of friction under contact is considered necessary for improved machine efficiency. However, inappropriate pattern designs produce higher friction coefficients and cannot reduce friction. In this study, we use cast iron pins as specimens to investigate their friction and wear characteristics. Moreover, we experimentally investigate the correlation between the friction reduction effect and the design of groove crosshatch patterns fabricated with various angles and widths. We conduct a friction test using a pin-on-disc type tribometer under grease lubrication to study the friction reduction effect of the specimens, and we observe that the average coefficient of friction changes with the crosshatch angle and width. The experiment reveals that grooved crosshatch specimens with a crosshatch angle of 135°maximize friction reduction. The coefficient of friction of the groove specimens with a width of 120 ㎛ is lower than that of the specimens with a width of 200?. The friction reduction effect of the width of the groove is attributed to the density of the groove pattern. Thus, grooved crosshatch patterns can be designed to maximize friction reduction, and the friction property of a grooved crosshatch pattern is found to be related to its width and angle.

• Journal of Microbiology and Biotechnology
• /
• 제12권4호
• /
• pp.583-591
• /
• 2002

Biodegradation of fat, oil, and grease (FOGs) plays an Important role in wastewater management and water pollution control. However, many industrial food-processing and food restaurants generate FOG-containing waste waters for which there Is no acceptable technology for their pretreatment. To solve these problems, this study evaluated the feasibility of effective FOG-degrading microorganisms on the biodegradation of olive oil and FOG-containing wastewater. Twenty-two strains capable of degrading FOGs were isolated from five FOG-contaminated sites for the evaluation of their FOG degradation capabilities. Among twenty-two strains tested, the lipase-producing Pseudomonas sp. strain D2D3 was selected for actual FOG wastewater treatment. Its biodegradability was performed at 3$0^{\circ}C$ and pH 8. The extent of FOG removal efficiency was varied for each FOG tested, being the highest for olive oil and animal fat (94.5% and 94.4%), and the lowest for safflower oil (62%). The addition of organic nitrogen sources such as yeast extract, soytone, and peptone enhanced the removal efficiency of FOGs, but the addition of the inorganic nitrogen nutrients such as $NH_4$Cl and $(NH_4)_2SO_4$ did not increase. The $KH_2PO_4$ sources in 0.25% to 0.5% concentrations showed more than 90% degradability. As a result, the main pathway for the oxidation of fatty acids results in the removal of two carbon atoms as acetyl-CoA with each reaction sequence: $\beta$-oxidation. Its lipase activity showed 38.5 U/g DCW using the optimal media after 9 h. Real wastewater and FOGs were used for determining the removal efficiency by using Pseudomonas sp. strain D2D3 bioadditive. The degradation by Pseudomonas sp. strain D2D3 was 41% higher than that of the naturally occurring bacteria. This result indicated that the use of isolated Pseudomonas sp. strain D2D3 in a bioaugmentating grease trap or other processes might possibly be sufficient to acclimate biological processes for degrading FOGs.

• 청정기술
• /
• 제13권2호
• /
• pp.143-150
• /
• 2007

본 연구에서는 플러스, 솔더, 그리스와 같은 오염물질을 효과적으로 세정하기 위하여 글리콜 에테르계, 파라핀계 및 실록산계 물질을 배합한 탄화수소계 세정제를 제조하고 습윤지수, 아닐린점 그리고 용해도 매개변수 등의 세정성능에 대한 영향을 조사하였다. 탄화수소계 세정제의 배합은 단일물질의 물성에 기초하여 제조되었다. 제조된 세정제의 습윤지수와 아닐린 점은 실험을 통하여 측정하였으며 용해도 매개변수는 Hansen의 추정식을 사용하여 계산하였다. 본 연구에서는 플럭스, 솔더, 그리스의 오염물을 사용하여 세정제의 세정성능 평가를 진행하였다. 실험결과 배합 세정제의 세정성능이 플럭스, 솔더, 그리스의 오염물 세정에 매우 우수하게 나타났으며 오염물에 따라 세정효율에 영향을 미치는 변수가 다르게 나타났다. 플럭스 세정에서는 플럭스($21.3MPa^{1/2}$)와 유사한 용해도 매개변수의 MC($20.3MPa^{1/2}$), DF-1($24.2MPa^{1/2}$), DF-2($21.5MPa^{1/2}$)세정제가 3분 이내에 100%의 세정효율을 보였다. 그리고 솔더 세정에서는 -$20^{\circ}C$ 이하의 아닐린점인 CFC-113, MC, 1,1,1-TCE가 높은 세정효율을 보였다. 그리스 세정에서는 그리스의 용해도 매개변수($15.0{\sim}17.0\;MPa^{1/2}$)와 가장 유사한 DG-1 세정제($16.2\;MPa^{1/2}$)와 DG-2 세정제($15.5\;MPa^{1/2}$)의 세정효율이 비교적 저조하였고 습윤지수가 크고 아닐린 점이 낮은 CFC-113과 MC가 세정효율이 우수하였다. 본 연구를 통해 플럭스, 솔더, 그리스의 오염물을 세정하기 위해 글리콜 에테르계, 파라핀계 및 실록산계 물질을 알맞게 배합하여 CFC-113, MC, 1,1,1-TCE와 같은 규제물질을 대체할 수 있는 탄화수소계 세정제를 개발할 수 있었다. 그리고 습유지수, 아닐린점, 용해도 매개변수 등과 같은 세정성 영향을 검토하여 비수계 세정제의 세정성능을 예측하고 세정제의 배합에 적용할 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.372-372
• /
• 2004

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.80-87
• /
• 1985

고온에서 화학적역안정성 및 기계적안정성의 섬유구조를 갖기 위해 lithim complex gellant로 정한 지방산과 $LiOH\cdot H_2O$ 및 boric acid의 이차연속검화반응으로 lithium dual complex 그리이스를 합성하였다. complex gellant의 양은 14%(NLGI 2호)가 적정량이었으며, 특히 castor wax를 1.5% 첨가했을때 이상적인 성능을 나타냈다. 이렇게 합성한 그리이스의 유분리성, 산화안정성, 내수성, 혼화안정성, 극압 및 내마모성은 ASTM 및 KS 방법에 준해 시험하였으며, 매우 우수한 특성을 지녔음을 알았다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.439-444
• /
• 2004

The important problem in high speed spindle is to reduce and minimize the thermal effect by motor and ball bearings. In this study. the effects of bearing preload and cooling for high speed spindle with high frequency motor are investigated. A high speed spindle is composed of angular contact ball bearings, high frequency motor, grease lubrication, oil jacket cooling, and so on. Heat generation of the bearing and the high frequency motor are estimated from the theoretical and experimental data. The thermal analyses of high speed spindle to minimize the thermal effect and maximize the cooling effect are carried out under the various cooling conditions and preload. Method of variable bearing preload and cooling can be useful to design the high speed motor spindle. The results show that the optimal preload and cooling are very effective to minimize the thermal displacement by motor and ball bearing.

• 한국환경과학회지
• /
• 제4권3호
• /
• pp.207-220
• /
• 1995

In order to study on the long-term change of water quality, water analysis was conducted at 16 sites surrounding the Kumho river system for 11 times from September 1990 to August 1993. Analytical items for the study of water Quality are as follows; water temperature, pH, COD, BOD, DO, SS, electrical conductivity, $NH_3-N$, $NO_2^-N$, NO_3^-N$, $PO_4^{3-}-P$, total-P, hardness, oil and grease, ABS, phenol, zinc, chromium, cadmium, manganese, iron, lead and color. The long-term change of water quality in the Kumho river for the period studied was found that the values of water temperature, electrical conductivity, phenol, $NO_2^-N$ and $NH_3-N$ were increasing and those of COD, BOD, SS, oil and grease, ABS, NO_3^-N$, $PO_4^{3-}-P$, copper, zinc, chromium, cadmium, manganese and lead were decreasing, while those of pH, hardness, iron and manganese were steady.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.41-46
• /
• 2003

The important problem in high speed spindles is to reduce and minimize the thermal effect by motor and bail bearings. Thermal characteristics according to the bearing pre-load and cooling condition are studied for the test spindl with grease lubrication and high frequency motor. Bearing and motor we main heat generation, and heat generation by ball bearings as a function of load, viscosity and gyroscopic moment effect are considered. Temperature distribution and thermal displacement according to the speed of spindle are measured by thermocouple and gap sensor. The results show that the fitting pre-load and cooling temperature are very effective to minimize the thermal effect by motor an ball bearings.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권4호
• /
• pp.1-7
• /
• 2015

This paper addresses technical problems of thermal contact conductance or resistance which inevitably occurs in most cryogenic engineering systems. The main focus of this paper is to examine what kind of physical factors primarily influences the thermal contact resistance and to suggest how it can be minimized. It is a good practical rule that the contact surface must have sub-micron roughness level with no oxide layer and be thinly covered by indium, gold, or Apiezon-N grease for securing sufficient direct contact area. The higher contact pressure, the lower the thermal contact resistance. The general description of this technique has been widely perceived and reasonable engineering results have been achieved in most applications. However, the detailed view of employing these techniques and their relative efficacies to reduce thermal contact resistances need to be thoroughly reviewed. We should consider specific thermal contact conditions, examine the engineering requirements, and execute each method with precautions to fulfil their maximum potentials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.299-301
• /
• 1997

It was investigated that space charge characteristics of EPDM/XLPE laminates as a function of interfacial condition. There were no effects in charge accumulation characteristics at EPDM/XLPE laminate samples pasted treated silicone oil and silicone grease. But when the crosslinking coagent (TMPTA) was pasted in laminate samples, there was no space charge in interface of EPDM/XLPE laminate. There were no effects in the laminate sample pasted silicone grease dissolved crosslinking coagent. In the coupling agent pasted EPDM/ XLPE laminate sample, space charge was accumulated in XLPE side caused by coupling agent.