• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.69-71
• /
• 2005

Earthquake disaster frequently happens in Shizuoka Prefecture and it is commonly predicted that a giant earthquake(Tokai Earthquake) could occur in the near future. When a giant earthquake happens, extensive damage of lifelines will be expected. It is considered that the collection of damage information and the establishment of a communication network system are very important in order to restore lifelines quickly. And geographic information system(GIS) might playa very important role to grasp the spatial information of lifeline damage in a natural disaster. The authors' group had a research project to study a lifeline restoration support system with image processing and ad hoc networking in a natural disaster. The objectives of this presentation are to introduce our project and to show some results of our study. The authors finally constructed the GIS for the integration of damage information acquired by image processing and ad hoc networking.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.23-33
• /
• 2004

Domestic city gas is supplying in an about 10 million household on present 34 city gas companies because is begun to supply regularly after two 1980 years middle. But, result that focus on city gas supply spread and stable supply for supply area and neglects about safety problem, hundreds casualties such as Ahyun explosion accident and Deagu city gas explosion accident were reached in situation that occurred large size calamity occurs it is dizzliness. In the case of advanced nation, can see that accomplish system and progress that in technology after experience major accident. Therefore, grasp problem investigating safety actual conditions for city gas institution and study about solvable plan is required this. Also, must guide reform and level elevation of a domestic company safety technology through induction and development of safety technology that is suitable in supply, domestic real condition etc. Must help in power positivity that is full text executing high-quality safety education about step High firing mechanism safety technology than present safety education.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2294-2297
• /
• 2011

The research which sees currently inspects the damage of the street lamp circuit which is used selectively the diode for developed. Street lamp diagnosis is developed will grasp the lighting presence of LED indication systems and will be able to inspect selectively. The case where the street lamp will not light, will be able to indicate with the relationship of LED putting out lights where the breakdown should have occurred in which part. Circuit produced PCB borads and the system will be able to confirm the breakdown point location of street lamp individual grade developed.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.271-274
• /
• 2002

The aim of FMEA method which is already generalized in the industry engineering is to grasp a possibility that defect forms will appear. And it is a means of prevention step to let person remove obstacles which have an influence on customers beforehand in order. The two parts of FMEA are Design FMEA which we prepare in an early stage and Process FMEA which we prepare in time previous to mass production. This Study apply Process FMEA to execution fields of the construction industry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.405-408
• /
• 2004

The sheet parts are formed with dies conventionally. But this conventional forming process is not suited to small volume and varied production for the reason of high cost. For the solution of this problem, a new forming process, which is called CNC incremental sheet forming, is being introduced. This process can form sheet parts without die, and is very well suited to small volume and varied production in space flight and automobile. In this paper, dieless CNC forming system based on a machining center is developed. A special device to grasp and pull the blank sheet built in the machining center and tool path generation S/W from STL file of 3-D model are developed. Several sheet parts are incrementally formed to verify the effectiveness of the developed system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.92-96
• /
• 2004

In this paper, polishing method using bonded magnetic abrasive particle has been applied to the micro mold polishing. Through process control using the Run-to-Run control, it tried to form the surface roughness In order to grasp the influence of the surface roughness which is reached by selection of control factor and the factor, a design of experiment was been processed. The study is processed with a purpose of to embody and to maintain the surface roughness of nano scale by the basis of an influence between a control factor and the factors which has been selected in this way. As a result, the result of the process control converged at a target value of surface roughness Ra 10nm and Rmax 50nm

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1104-1109
• /
• 2001

In this paper, we describe a method for real-time transmitting video streams based on RTP. In order to guarantee synchronous video streams, we propose a method to grasp network situations by analyzing end-to-end network traffic. In addition, we present an algorithm for satisfying QoS requirements of real-time multimedia transmission and maintaining continuity of transmission. It describes a buffering method for overcoming bandwidth limitations and an analyzing method based on RTCP for grasping network traffic situation to resolve the problem of real-time transmission of video streams.

• Journal of the Korean Institute of Educational Facilities
• /
• v.5 no.2
• /
• pp.5-15
• /
• 1998

The purpose of this study is to attain basic source for spacial re-organization of the elementary school. This is the first step of some series of the study, For purpose, some investigations is to grasp the change of education system, curriculum and the present condition of institution were done, and some questions on the using condition of space, the satisfaction and the hope for the space of their school were asked to 371 teachers in elementary school, by questionnaire and interview methods. The result of the survey was analyzed using a statistics-analysis program SAS. The results are summarized as follows: 1) Corridor is using to extend of learning and living space. 2) To correspond to open education, various comers are placed in the classroom and the corridor. 3) As the change of educational system, teachers need parting the source center and the teacher's room.

• Journal of the Korean Society of Safety
• /
• v.7 no.4
• /
• pp.23-32
• /
• 1992

Surface treatment and chemiluminescence characteristics of the polymer film. It was studied that the Intensities and rates of treatments are in proportional to condition of the treatment, considering the results of study on treatments to polymer film with discharge and ultraviolet irradiation through the methods such as surface resistance, contact angle, dyeing method, solace ten-sion and so on. It was also studied that the said has a nice correlation with the concerned result studied by chemiluminescence. Since the chemiluminescence will enable the Investigators to grasp a eertain condition caused by quitely slight deterioration with high sensitivity, it can be also used as a way for getting an information regarding the decision for degradation-condition and life-estimating of insulation material basically related to some security matters as well as surface condition of treatments through the above method.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.265-270
• /
• 1998

As the goal of enterprises is to pursuit benefits, the goal of safety management is not only preventing accidents but also promoting benefits and productivity. However, enterprises have failed to realize the necessity of safety management, partly because they didn't grasp any appropriate evidences advocating effectiveness of safety management. This study aimed to survey construction-site engineers' consciousness on safety management contributing to cost reduction, construction period and quality enhancement. The result of this study showed that constriction-site engineers recognized the ratio of direct cost to Indirect cost as 1:2. The proportion of repliers who thought that safety management is contributable to cost reduction was 35％, to construction period was 20％, and to quality enhancement was 48％. The construction sites with excellent safety accomplisments also had good work and selling amounts.