• Spatial Information Research
• /
• v.4 no.1
• /
• pp.1-11
• /
• 1996

DRASTIC system developed by U.S.EPA, is widely used for assessing groundwater pollution potential The system can be applied to site selection of well or waste disposal, Ianduse planning for groundwater protection, and monitoring. In this study, GIS(Geographic Information System) was established hydrogeological database of DRASTIC system and cartographic modeling to asre:; regional groundwater pollution potential around Chungju Lake. Hydrogeological factors of the system were depth to water, net recharge, aquifer media, soil media, slope and hydraulic conductivity. Risk of groundwater pollution to non -point source pollution, was also analyzed by incorporation of actual pollution sources(N, P) and DRASTIC system. The GIS data could be very quickly analysed hydrogeological characteristics of the study area by graphic user interface programs devel¬oped with AML(ARC Macro Language) of ARC/INFO.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1808-1818
• /
• 2015

Recently, the wind power has experienced great attentions and growths among many renewable energy sources. To increase the power generation performance and economic feasibility, the size of wind turbine (WT) is getting bigger and most of wind power plants are being constructed on offshore. Therefore, the maintenance cost is relatively high because boats or helicopters are needed operators to reach the WT. In order to combat this kind of problem, remote monitoring and control system for the WT is needed. In this paper, the small-scale WT monitoring and control system is implemented using wireless sensor network technologies. To do this, sensor devices are installed to measure and send the WT status and control device is installed to receive control message for specific operation. The WT is managed by control center through graphic user interface (GUI) based monitoring and control software. Also, smart device based web-program is implemented to make the remote monitoring of the WT possible even though operators are not in control room.

• Spatial Information Research
• /
• v.11 no.3
• /
• pp.275-289
• /
• 2003

This study focused on offering a helpful information for the touring. To develop a tour route guidance tool, it is needed to use a GIS function, which can suggest a possible shortest path based on time and distance. A Traveling salesman problem algorithm, which was developed to solve multi destination problem in network analysis, was used to implement a tour guidance system. This system was developed using ArcObjects programming components within ArcGIS 8.3. Jeju city was selected for the case study to apply the tool and to test the effectiveness of it. This study demonstrated that this tool was considerably effective for finding a probable optimum tour path in the following aspects. First, it can help tourists to select several attractions from numerous tour sites in an area given limited time. Second, tourist can manage time efficiently by organizing their tour courses on the basis of the tool. Third, tourists can reduce the uncertainties that may happen under unexpected situations in unfamiliar places by obtaining specific spatial information using the tool. Fourth, the Graphic User Interface of the tool can be easily used to obtain visual information of spatial data.

• Journal of Korean Academy of Nursing
• /
• v.26 no.2
• /
• pp.399-412
• /
• 1996

Even though Korean medical law stipulates that number of patients attended by a nurse is 2.5 for hospitalization and 30 for ambulatory care, the number of patients cared by a nurse per day is much greater than the standard prescribed by the medical law. Current nursing productivity of nurses is not desirable unless the quality of care considered. Moreover. nursing manpower staffing based on neither current nurses' productivity nor standard of medical law cannot respond properly to dynamic situation of the medical services. As for the nurse scheduling, the critical problem of it in the hospital is determining the day-to-day shift assignments for each nurse for the specified period in a way that satisfies the given requirements of the hospital. Nurse scheduling, however, involves many factors and requirements, manual scheduling requires much time and effort to produce an adequate schedule. Under these backgrounds, the necessity of more efficient management of nursing manpower occupying 1/3 of total hospital workers has been recognized by many nursing administrators. This study was performed to develop a system computerizing nurse staffing and scheduling based on the patient classification. As a preliminary step for the system development, nursing workload in a secondary hospital was measured from Sep. to Oct. 1994. On the grounds of this result, computerization of nurse staffing and scheduling was proceeded with three options. First one is based on the current medical law. Second one is based on the assigned number of nursing staff. And the last is based on the request by patient classification. Computer languages used in this study were MS Visual Basic 3.0 for the staffing and Access 2.0 for the scheduling, respectively. Prospective users may operate this system easily because icons and mouse are used for easier graphic user interface and reducing the need for typing efforts. This system can help nurse administrators manage nursing manpower efficiently and nurses develop quick and easy schedule generation and allow more time for the patient care.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.369-375
• /
• 2001

For Optimization technology Was Developed in 1960, the Optimization Technology have grown into a full-featured, robust, highly rated and highly used. And Optimization techniques, having reached a degree of maturity over the past several years, are being used in a wide spectrum of industries, including aerospace, automotive, chemical, electrical, and manufacturing industries. With rapidly advancing computer technology, computers are becoming more powerful, and correspondingly, the size and the complexity of the problems being solved using Optimization techniques are also increasing. But Optimization techniques with analysis solver have many problems. For instance, the difficulties that a particular interface must be coded for each design problem and that the designer should be familiar with the optimization program as well as the analysis program. The purpose of this paper is Optimal Design Framework for Mechanical systems design. This Design Framework has two Optimizers, ADS (local optimizer) and RSM(Response Surface Method), and graphic user interfaces for formulation and optimum design problem and controlling the design process. Current Design Framework tested by two analysis solver, ADAMS and ANSYS. First this paper focused on the core Framework and their conception. In the second of the paper, I cover subjects such as Design Framework Operation. Next, The validity and effectiveness of Design Framework are shown by applying it to many practical design problems and obtaining satisfactory results. Finally, if you are an advanced Operator, you might want to use Response Surface Method, so that cover the result applied by RSM. here.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1153-1164
• /
• 2012

In this paper, we propose an efficient car management system based on object-oriented modeling using car number recognition and smart phone. The proposed system perceives car number of repair vehicle after recognizing the licence plate using an IP camera in real time. And then, existing repair history information of the recognized car is be displayed in DID. In addition, maintenance process is shooting video while auto maintenance mechanic repairs car through IP-camera. That will be provide customer car identification and repairs history management function by sending key frames extracted from recorded video automatically. We provide user graphic interface based on web and mobile for your convenience. The module design of the proposed system apply software design modeling based on granular object-oriented considering reuse and extensibility after implementation. Car repairs center and maintenance companies can improve business efficiency, as well as the requested vehicle repair can increase customer confidence.

• The KIPS Transactions:PartD
• /
• v.8D no.2
• /
• pp.117-124
• /
• 2001

A data mining system includes various data mining functions such as aggregation, association and classification, among others. To express these data mining function, a powerful data mining query language is needed. In addition, a graphic user interface(GUI) based on the data mining query language is needed for users. In addition, processing a data mining query targeted for a data warehouse, which is the appropriate data repository for decision making, is needed. In this paper, we first build a GUI to enable users to easily define data mining queries. We then propose a data mining query processing framework that can be used to process a data mining query targeted for a data warehouse. We also implement a schema generate a data warehouse schema that is needed to build a data warehouse. Lastly, we show the implementation details of a query processor that can process queries that discover association rules.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.19-26
• /
• 2004

AllWayS(AWS, Satongpaldal in Korean) is the first comprehensive computer software in Korea that is developed for the transportation demand modeling. The original DOS version software was recently receded for Windows environment. Traditional 4-step transportation demand forecasting process is incorporated in the software under graphical user interface environment. AWS is able to compose or edit graphic transportation networks data by each scenario which could be the subject of an analysis. Besides, it use database structure that can handle every data of a scenario such as networks, O/D, and socio-economic data, etc. We expect this integrated process could provide each analyst with efficient and easy to use tool for their analysis. Each models in this software is based on traditional algorithms and the results were compared to existing software, EMME/2 and it showed similar results.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.575-584
• /
• 2005

The judgement model to warn of possible pollution accident is constructed by multi-perceptron, multi layer neural network, neuro-fuzzy and it is trained stability, notice, and warming situation due to developed standard axis. The water quality forecasting model is linked to the runoff forecasting model, and joined with the judgement model to warn of possible pollution accident, which completes the artificial intelligence warning system. And GUI (Graphic User Interface) has been designed for that system. GUI screens, in order of process, are main page, data edit, discharge forecasting, water quality forecasting, warming system. The application capability of the system was estimated by the pollution accident scenario. Estimation results verify that the artificial intelligence warning system can be a reasonable judgement of the noized water pollution data.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.82-97
• /
• 2001

In this paper, we describe a software implementation of a digital TV stream analyzer that can be used for analyzing and verifying digital TV bitstreams on personal computes. It accepts as input MPEG-2 transport streams (TS's) already stored on hard disks and doesn't require any special hardware. After classifying TS packets into program specific information(PSI) TS section auido, video, program clock reference (PCR) private data and null packets, it displays their contents through a graphic user interface along with the syntax elements of the TS header. Also it displays the decoded I frame nearest in time axis the TS packet currently shown This feature helps pin pointing the specific location of problematic parts in bitstreams. The bitsteam analyzer provides the compliance test of MPEG-2 Systems standard and the data injection functionality with which one can easily insert additional data to existing MPEG-2 bitstreams. Using the resulting system one can produce at low test streams for interactive broadcasting and data broadcasting for laboratory use.