• 한국해양공학회지
• /
• 제7권1호
• /
• pp.56-61
• /
• 1993

Standard values in graphic porms are presented for the ratio of added wave resistance to the sun of added wave and wind resistances in head sea for three ship types, tanker, container ship and passenger ship. The effect of ship length on the ratio defined above is investigated for the three ship types. Obique sea added resistance is determined using wave direction reduction factor. The factor is obtained from model test results and cubic spline interpolation technique.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.15-24
• /
• 2010

Photovoltaic solar cells are all in the incident because they are not converted into electrical energy, high-efficiency solar cells in order to reduce the loss of elements must be. Significant factor in the loss of solar cells, optical loss and electrical loss can be divided into. Optical losses occur when the sun will be joined on the surface of the reflection, the shadow loss due to electrodes, and the losses are in the solar wavelengths. Commercialization is currently the most common solar cells on the front of the light incident on the electrode is formed. Therefore, the shadow caused by the electrode to cover the dead area of the sun, due to factors that hinder the absorption of sunlight which is shadowing them and conversion efficiency of solar cells is the inhibition factor. These barriers to eliminate the electrode linewidth reduces the shadowing to reduce, but simply of the electrode line width is reduced electrode area by reducing the series resistance elevates this because to improve the electrode Aspect ratio(height/width) to increase Ag development of paste is required. In this study, aspect ratio of screen-printing method to increase the electrode Ag paste composition of the binder for the characterization of rheology in the shadow of the electrode by reducing the optical loss of the photoelectric conversion efficiency of solar cells to boost the performance measures was. Properties and printability of the paste, the binder resin sintered characteristics that affect the thermal properties are excellent with a good screen printability acrylic resin, ethyl cellulose, using a resin were evaluated. Prepared paste rheology properties, was formed to evaluate the electrode conductivity and aspect ratio.

• 한국가정과교육학회지
• /
• 제21권2호
• /
• pp.61-81
• /
• 2009

본 연구는 2007년 개정 기술 가정 교육과정에서 중학교 2학년 '식단과 식품 선택' 단원의 교육내용요소를 추출하고 이를 바탕으로 도식자를 개발하는데 목적이 있다. 내용요소를 추출하는 과정은 3차에 걸쳐서 이루어졌다. 1차 내용요소는 2007년 개정 교육과정 해설서의 5학년부터 10학년까지 식생활영역 성취기준에서 교육내용요소로 제시하는 문장이나 개념을 분석하여 추출하였다. 본 연구 단원에서는 4개의 1차 내용요소가 추출되었는데 '우리나라 전통 식사의 건강적 측면의 우수성, 영양적 식품적 문화가치', '균형잡힌 가족의 식단 작성', '식단에 따른 식품의 계획적 구입', '다양한 식품표시정보를 통한 식품 선택'이다. 2차 내용요소는 본 연구 단원의 1차 내용요소를 구체화하여 다른 학년의 1차 내용요소에서 발생한 중복성을 해결하고 학년간 연계성을 이루도록 하여 추출하였다. 3차 내용요소는 2차에 추출된 내용요소를 더욱 세분화하여 추출하였는데 이를 위해 7차 교육과정 교과서, 전문기관에서 발행하는 자료, 관련전문서적 등을 분석 참고하였다. 이어서 추출한 내용요소를 바탕으로 기술 가정 8학년 '식단과 식품선택' 단원의 도식자를 개발하였다. 도식자는 허인숙(2000)의 개념도 작성방법의 순서를 따라서 개발되었다. 개발된 도식자는 총 10개로 '계절음식의 영양적 가치', '식품의 조화와 배합', '천연양념과 고명', '조리법', '발효식품', '전통도구와 그릇', '식품구입목록표 작성', '식품위해요소', '식품표시', '식품품질인증'으로 구성된다.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.117-128
• /
• 2010

Advancements in digital image have put high quality digital camera into the hands of many image professionals and consumers alike. High quality digital camera images consist originally of raw which have a set of color rendering operation applied to them to produce good images. With color rendering, the raw file was converted to Adobe RGB and sRGB color space. Also color rendering can incorporate factor such as white balance, contrast, saturation. Therefore, in this paper we conduct a study on production of optimum profile considered color rendering in digital camera. To do the experiment, the images were Digital ColorChecker SG target and ColorChecker DC target. A profiling tool was ProfileMaker 5.03. The results were analyzed by comparing in color gamut of $CIEL^*a^*b^*$ color space and calculating ${\Delta}E^*_{ab}$. Also results were analyzed in terms of different $CIEL^*a^*b^*$ color space quadrants based on lightness, chroma.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2002년도 정기총회 및 학술대회
• /
• pp.179-182
• /
• 2002

본 논문에서는 디지털 이퀄라이저에 대하여 검토하고, 대역 및 이득에 따라 Q-factor를 가변시키는 디지털 이퀄라이저 필터를 제안한다. 제안한 기법은 고정된 Q-factor를 사용하거나, 대역에 따라 Q-factor를 결정하는 기존의 방법들에 비해 가청 주파수 영역에서의 대칭성과 이득 리플 등의 측면에서 우수하고, 기존의 방법과 동일한 수준의 하드웨어 복잡도를 보인다. 또한, 중심 주파수 선정에 따른 성능 변화에 대해서도 고찰한다.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.35-54
• /
• 1992

Direct electrostatic coating method is simple, low cost and environmentally useful method. We are investigated on the coating of carrier transfer polymer layer on the carrier generate inorganic pigment layer using direct electrostatic coating method. The sample was obtained electrostatic deposite layer by fusing and calendering on the copper phthalocyanine. we could be found several polymer thin film shows good bond properties between film and pigment layer.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.61-68
• /
• 2006

Rubber rollers in off-set printing process are one of the most important factor, transferring the ink and water to the plate. Each different roughness of roller surface and different rubber compounds could effect to ink transparency and printability. Three different rubber compounds (NBR, EPDM, PU) and each different roughness of roller surface would show us different result of ink transparency and density of actual printing result. There might be a differences from actual printing result not only the amount of transferred ink, but there is also some other point we should check it out. According to the result of this studies, we found that different rubber compounds and their surface roughness directly effect to the rate of ink transfer. It also shows that the amount of transferred ink is not even and stable amount what we expect to get optimum printability. To reach a targeted printability with rollers, firstly it is necessary to choose correct rubber compounds with certain purpose and the roughness of roller surface has to be as smooth as less than $5{\mu}m{\sim}7{\mu}m$.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.13-27
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printablility of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular weight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.73-87
• /
• 2009

The purpose of this study is to provide a executive guideline of humor in Print advertising by analyzing the copy style. For this aim, in-depth analysis about the copy style of humor in Print advertising collected by the web-site of TV cf from 2005 to 2008 was performed. In conclusion, findings showed that the copy style in the pattern of expression was focused on the psychological arousal and incongruity and the pattern of damaging and attacking someone's prestige was considered to be significant in some degree. It was also found that the copy style of humor in Print advertising in the method of expression was focused on the factor of pun, jokes, double-meaning but the factor of satire, irony and turns of phrase was a minority.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.1-12
• /
• 2006

The rheological characteristics of an ink relate to its performance on the press and to the printing quality such as ink stability, transfer characteristics, mottle, squash, misting, dot gain, and so on. For lithographic print, the emulsification of ink is an important factor to determine the product. And also the rheological characteristics of the emulsified ink should be investigated. Thus, in this study, the effects of the changing molecular weight of rosin modified phenolic resin on the water-pickup ratio of neat inks were studied. And then rheological properties of neat inks and emulsified inks with changing molecular weight of rosin modified phenolic resin were analyzed by using rotational rheometer.