• Journal of the Korean GEO-environmental Society
• /
• v.11 no.7
• /
• pp.25-31
• /
• 2010

In this study, it was intended to suggest new cooling method that enables to improve the applicability and added value higher than existing slag by applying new cooling method(powder cooling slag) at the time discharging slag, which is produced from the ash melting system that the plasma torch is used for the first time in Korea. It is suggested the applicative direction in the development of future recycling process by discovering its nature of material and applicative possibility as earthwork material. The ashes produced after the sewage sludge discharged from Y city was incinerated by the fluidized bed method and was used as test materials. As result of XRF(X-Ray Flourescence Spectrometry) analysis, main ingredient of sewage sludge ashes was $SiO_2$(32%) besides CaO, $Al_2O_3$, $Fe_2O_3$, and so on. In addition, as result of XRD analysis, traditional diffuse pattern of glass could be found from granulated air-cooled slags, while a minor crystal phase could be observed from powder cooling slag, because the powder on the surface exists in the state not melted. From EDX(Energy Dispersive X-ray Spectroscopy) analysis, it is deemed that powder ingredient has no change before and after it is used as cooling medium, and accordingly it is thought that the powder can be produced as the material where the function is added if used in different shape.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.1-9
• /
• 2004

This paper represents the permeability of chloride ions and the corrosion performance in the concrete blended with granulate blast furnace slag exposed to chloride environment. An ordinary cement (type I ) and sulfate resisting cement(type V) were used for the experiment. The two cements were combined with $0\%$, $25 \%$, $40\%$, and $55\%$ of the granulated blast furnace slag. The accelerated permeability tests of chloride ions were performed in accordance with ASTM C1202, and the accelerated corrosion tests of steel were carried out by using the method of immersion/drying cycles. After water curing 28 days, 56 days and 91 days, these tests were conducted until 30 cycles. In every cycle, test specimens were wetted in $3\%$ NaCl solution for three days and dried again in $60^{\circ}C$ air for four days. As an experimental results, the diffusion coefficient of chloride ions of the ordinary cement Concrete Combined granulated blast furnace slag was much lower than that of non granulated blast furnace slag concrete. Moreover, the diffusion coefficient of chloride ions of sulfate resisting cement concrete was higher than that of ordinary cement concrete. On the basis of the results of accelerated corrosion tests, corrosion resistance of the concrete mixed with granulated blast furnace slag shows good to corrosion resistance, however, the concrete with sulfate resisting cement shows bad to corrosion resistance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.207-210
• /
• 1999

This experimental study was carried out to estimate the effects of mixing dosage rate and blaine on the mechanical properties of concrete admixed with ground granulated blast-furnace slag (BFS) powder. According to the test results, compressive strength of concrete admixed with slag not more than 35% was at least 80% of compressive strength of OPC concrete at 3 days age, and much bigger than that of OPC concrete at 28 days age. Consequently, in order to apply the BFS to the concrete is demanded, and rigorous construction management should be followed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.297-300
• /
• 1999

This study was carried out to present the properties of fresh concrete made with ground granulated blast-furnace slag (BFS) powder with variations of blaine and content, and to estimate the utilization of the BFS concrete as admixtural materials for concrete structures of the building. According to the results, the fluidity of concrete which BFS dosage rate was 45% had the considerable difference from that of concrete which BFS dosage rate was not bigger than 35%. Also, the diminution of bleeding was appeared with the increase of blaine and content of BFS. It is concluded that BFS concrete of low blaine can be used effectively in concrete structures of the building.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.21-28
• /
• 2006

This study was carried out to examine the effect of soil improvement according to the shape of charcoal and the kind of carbonized tree species. As the results, all of the seedlings of Thuja occidentalis and Aesculus turbinata grew better in the charcoal-treated soil than the non-treated soil. In case of powder charcoal, Thuja occidentalis seedlings grew up best in the soil treated with powder charcoal of Pinus koraiensis and then grew well in order of Larix leptolepis > particle board > Quercus acutissima. In case of granulated charcoal, the seedlings grew well in order of the granulated charcoal of Larix leptolepis > particle board > Pinus koraiensis. It was analyzed that the soil porosity and the organic matter content were mo re in the charcoal -treated soil than the non-treated soil also. It is inferred that because the aeration property and the absorption of organic matter were increased in the root zone, the growth of seedlings was better in the char-coal-treated soil.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.55-60
• /
• 2008

This study was carried out to investigate the effect of charcoal meal application on the quality of the wood. As the results, it was observed that annual ring width of seedlings was wider in the plots treated with charcoal meal than the control plots. Depending on the kind of charcoal, annual ring width was widest in the plot treated with Larix kaempferi charcoal, and then was observed in order of Pinus koraiensis > particle board > Quercus acutissima. Latewood percentage and specific gravity were lower in the plots treated with charcoal than the control plots and lowest in Larix kaempferi charcoal plot among the plots treated with charcoal. Tracheid length was longer in the plot treated with powder charcoal than the control plot but tracheid width was not significantly different from the control plot. The cell wall thickness of earlywood was not significantly different between the plot treated with charcoal and the control plot but that of latewood was thicker in the plots treated with charcoal than the control. Microfibril angle was smaller in the plot treated with granulated charcoal than the control plot. However, there was no significant difference between the plot treated with powder charcoal and granulated charcoal.

• Journal of the Korean Society of Tobacco Science
• /
• v.35 no.1
• /
• pp.13-19
• /
• 2013

The natural ingredient has been utilized variety of the food and medicine. The aromatherapy well known prevent disease and healthy promotion using the essential oil derived extracted plants. In this work, natural ingredient include herb granulated for application of tobacco filter. That used by granulation using fluidized bed granulator(top-spray, bottom-spray and tangential-spray) and wet granule method. According to ingredient can used granulating method selectivity. So, we used fluid-bed granulator and wet granule method. Grapefruit extract coated sugar particle using the bottom-spray method and red ginseng granule granulated red ginseng powder using the tangential-spray method in a fluidized bed. Then, these granules applied the tobacco filter after due consideration add amount and operation efficiency. As a result, wet granule was loaded dual filter because that similarity carbon granule. And it was fitted in added 3mg/mm, per tip in the tobacco end part. Another type, fuidized bed granules was filled cavity filter because it has high hardness, sphere shape.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.77-84
• /
• 2017

Shirasu, a pyroclastic flow deposit, showed considerable performance as aluminosilicate source in geopolymer, based on past research. However, the polymerization reactivity was somewhat lower compared to the traditional fly ash based geopolymer even though the long-term strength was fairly good. The present study concentrates on the development of higher initial strength performance of Shirasu based geopolymer by utilizing ground granulated blast furnace slag as an admixture. Mortars with various mix proportions were adopted to study the effect of parametric changes on strength development along with the addition of slag in different percentages. A combination of sodium hydroxide and sodium silicate was used as alkaline activators considering parameters like molar ratios of alkali to geopolymer water and silica to alkali molar ratio. The mortars were cured at elevated temperatures under different curing conditions to analyze the effect on strength development. Compressive strength test, mercury intrusion porosimetry and X-ray powder diffraction were carried out to assess the strength performance and microstructure of slag-Shirasu based geopolymer. Based on the experimental study, it was observed that the initial and long-term strength development of Slag-Shirasu geopolymer were improved by the addition of slag.

• Advances in concrete construction
• /
• v.9 no.4
• /
• pp.345-354
• /
• 2020

Cement is the most significant component in concrete. Large scale manufacturing of cement consumes more energy and release harmful products (Carbon dioxide) into the atmosphere that adversely affect the environment and depletes the natural resources. A lot of research is going on in globally concentrating on the recycling and reuse of waste materials from many industries. A major share of research is focused on finding cementitious materials alternatives to ordinary Portland cement. Many industrial waste by-products such as quartz powder, metakaolin, ground granulated blast furnace slag, silica fume, and fly ash etc. are under investigations for replacement of cement in concrete to minimize greenhouse gases and improve the sustainable construction. In current research, the effects of a new generation, ultra-fine material i.e., alccofine which is obtained from ground granulated blast furnace slag are studied as partial replacement by 25% and with varying amounts of sulfonated naphthalene formaldehyde (i.e., 0.3%, 0.35% and 0.40%) on mechanical, water absorption, thermal and microstructural properties of concrete. The results showed moderate improvement in all concrete properties. Addition of SNF with combination of alccofine showed a significant enhancement in fresh, hardened properties and water absorption test as well as thermal and microstructural properties of concrete.

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.569-573
• /
• 2006

This study was conducted to manufacture new product containing high soluble polysaccharide from Hericium erinaceus extract. The new products were prepared for powder, granulate and tablet form by spray drying process. The high soluble powder form was mixed with sub-ingredients and then granulated form by granulator and molded as tablet form by a press molder respectively. Moisture content of products was following order; spray dried powder > granule > tablet Total sugar content of produce was observed to 19.14% in spray dried powder, 37.58% in granulate and 35.76% in tablet. The hue angle of products was $85.5^{\circ}$ in spray dried powder, $95.37^{\circ}$ in granulate and $94.67^{\circ}$ in tablet. The absorption capacity was higher in powder, but the product type did not affect the color.