• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1182-1189
• /
• 2010

The mechanical behavior of a granular material is governed by the applying effective stresses and its skeletal structure which is considered to be the packing of particles giving overall density and degree of anisotropic. Factors that affect soil packing are the particle size, size distribution and shape, and the arrangement of grain contact. Soil particle size and shape are the most important factor, but difficult to quantify. In this study, 2D Fourier analysis is applied to quantify the shape of granular particles. Jumunjin sand was used in the experiment and particle images are captured using an optical microscope. The results showed that three lower order Fourier descriptor are closely related with roundness, sphericity of the granular particle. Also statistical approach is used to determine roundness, form factor, elongation ratio, roughness of Jumunjin sand.

• Korean Journal of Materials Research
• /
• v.24 no.7
• /
• pp.344-350
• /
• 2014

Metal films (i.e., Ti, Al and SUH310S) were prepared in a magnetron sputtering apparatus, and their cross-sectional structures were investigated using scanning electron microscopy. The apparatus used consisted of a cylindrical metal target which was electrically grounded, and two anode rings attached to the top and to the bottom of the target. A wire was placed along the center-line of the cylindrical target to provide a substrate. When the electrical potential of the substrate was varied, the metal-film formation rate depended on both the discharge voltage and the electrical potential of the substrate. As we made the magnetic field stronger, the plasma which appeared near the target collected on the plasma wall surface and thereby decreased the bias current. The bias current on the conducting wire was different from that for cation collection. The bias current decreased because the collection of cations decreased when we increased the magnetic-coil current. When the substrate was electrically isolated, the films deposited showed a slightly coarse columnar structure with thin voids between adjacent columns. In contrast, in the case of the grounded substrate, the deposited film did not show any clear columns but instead, showed a densely-packed granular structure. No peeling region was observed between the film and substrate, indicating good adhesion.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.4
• /
• pp.633-644
• /
• 2019

An advanced anaerobic expanded granular sludge bed (AnaEG) and an internal circulation (IC) reactor, which were adopted to treat starch processing wastewater (SPW) and ethanol processing wastewater (EPW), were comprehensively analyzed to determine the key factors that affected the granules and microbial communities in the bioreactors. The granule size of $900{\mu}m$ in the AnaEG reactor was smaller than that in the IC reactor, and the internal and external morphological structures of the granular sludge were also significantly different between the two types of reactors. The biodiversity, which was higher in the AnaEG reactor, was mainly affected by reactor type. However, the specific microbial community structure was determined by the type of wastewater. Furthermore, the dominant methanogens of EPW were mainly Methanosaeta and Methanobacterium, but only Methanosaeta was a major constituent in SPW. Compared with the IC reactor, characteristics common to the AnaEG reactor were smaller granules, higher biodiversity and larger proportion of unknown species. The comparison of characteristics between these two reactors not only aids in understanding the novel AnaEG reactor type, but also elucidates the effects of reactor type and wastewater type on the microbial community and sludge structure. This information would be helpful in the application of the novel AnaEG reactor.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.84.1-84.1
• /
• 2012

Recent spectropolarimetric observations with high spatial resolution and high polarization sensitivity have provided us with new insight to better understand the quiet-Sun magnetism. This talk is concerned with the ubiquitous transient horizontal magnetic fields in the quiet-Sun, as revealed by the Solar Optical Telescope (SOT) on board Hinode satellite. Exploiting the SOT data with careful treatment of photon noise, we reveal the enigmatic properties of these horizontal magnetic fields such as lifetime, size, position in terms of granular structure, occurrence rate, three-dimensional structure, total magnetic flux, field strength distribution, relationship with the meso- and super-granulations and so on. Based on these observational consequences, we conjecture that the local dynamo process, which takes place in a relatively shallow layer with the granular size, produces these transient horizontal magnetic fields and that these horizontal magnetic fields contribute to the considerable amount of quiet-Sun magnetic fields. We also estimate the magnetic energy flux carried by these horizontal magnetic fields based on the statistical data, and find that the total magnetic energy is comparable to the total chromospheric and coronal energy loss, implying their important role for the chromospheric heating and dynamism.

• Journal of the Korean institute of surface engineering
• /
• v.18 no.2
• /
• pp.53-60
• /
• 1985

The microstructure of zine electrodeposits was investigated by using zinc sulfate solution in still bath. The cathode current efficiency decreased with increasing current density, and decreasing temperature. The preferred orientation of the zinc electrodeposits changed from (10.3) texture to(10.${\ell}$)-(00.1)(${\ell}$=1, 2, 3) texture through (10.2)-(10.3) preferred orientation with increasing cathode over potential. The surface morphology of zinc electrodeposits changed from the dendritic growth with granular crystallites to the blocks of hexagonal crystallites packed together with increasing current density. The microstructure of cross section of the above deposits are the rough granular structure and columnar structure respectively.

• The Korean Journal of Zoology
• /
• v.32 no.2
• /
• pp.107-119
• /
• 1989

The histochemical characteristics of the cutaneous granular glands and its fine structure of the Korean fire bellied toad, Bombino orientalis Boulenger the only species inhabitated in Korea, were studied with light and electron microscopes. By the granular size and histochemical properties, the granular glands were subdivided into two types. The type I glands have small secretory granules (3.6 $\mu$ m), whereas the type II glands contain relatively larger granules (7.5 $\mu$ m). These two types of glands were simple alveolar gland, and they were commonly composed of inner glandular epithelial cells and outermost myoepithelial cells. By the histochemical reactions, these two secretory granules were not responsed to Alcian blue, but weakly positive reaction was observed in type I granular glands by the PAS reaction. And by the scanning electron microscopic observation, extemal morphology of the opening site of the gland duct was resembled to the stomata of the plant leaves. Especially the epithelial cells of the type I glands had fine reticular surface whereas, type II glands had large vesicular surface. These types of the glands conimonly had larger cavities than those of mucous glands, and forming the multinucleated unicellulr structure (syncytium) at the glandular epithelial layers. Secretory granules of these glands were originated from the rough endoplasmic reticulum of the glandular epithelial cells, and by the maturation level of the granule, morphological diversities appeared.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.5
• /
• pp.379-385
• /
• 2003

The surface morphology, the glossiness and the hardness of Zn-Cr and Zn-Cr-X(X:Co, Mn) alloy electrodeposits were investigated by using chloride bath with EDTA additive and flow cell system. The surface morphology of Zn-Cr alloy and Zn-Cr-Mn alloy changed from fine needle shape crystalline structure to colony structure of fine granular crystallites with increasing current density in the range of 20-100 $A/dm^2$. The surface morphology of Zn-Cr-Co alloy deposited from low Co concentration bath(2.5-10 g/$\ell$) was similar to that of Zn-Cr alloy, while that of Zn-Cr-Co alloy deposited from high cobalt concentration bath was fine granular crystalline structure in the same range of current density. The glossiness of Zn-Cr and Zn-Cr-Mn alloy increased noticeably with increasing current density, while that of Zn-Cr-Mn alloy decreased with increasing Mn concentration of bath in high current density region. The glossiness of Zn-Cr-Co alloy deposited from low Co concentration bath increased with current density while that of the alloy from high Co concentration bath decreased with increasing current density. The hardness of Zn-Cr and Zn-Cr-X alloy increased noticeably with current density.

• Korean Journal of Materials Research
• /
• v.29 no.8
• /
• pp.511-518
• /
• 2019

In this study, the effect of carbon equivalent and cooling rate on microstructure and hardness of A516 steels for pressure vessel is investigated. Six kinds of specimens are fabricated by varying carbon equivalent and cooling rate, and their microstructures and hardness levels are analyzed. Specimens with low carbon equivalent consist of ferrite and pearlite. As the cooling rate increases, the size of pearlite decreases slightly. The specimens with high carbon equivalent and rapid cooling rates of 10 and $20^{\circ}C/s$ consist of not only ferrite and pearlite but also bainite structure, such as granular bainite, acicular ferrite, and bainite ferrite. As the cooling rate increases, the volume fractions of bainite structure increase and the effective grain size decreases. The effective grain sizes of granular bainite, acicular ferrite, and bainitic ferrite are ~20, ~5, and ${\sim}10{{\mu}m$, respectively. In the specimens with bainite structure, the volume fractions of acicular ferrite and bainitic ferrite, with small effective grains, increase as cooling rate increases, and so the hardness increases significantly.

• Korean Journal of Ichthyology
• /
• v.9 no.1
• /
• pp.121-129
• /
• 1997

The five species of genus Cobitis from Korea were investigated by electron microscopes to clarify the adhesive membranes on zona radiata. In the late vitellogenic stage the adhesive membranes could be classified into two form as follows: 1) granular form of Cobitis lutheri, C. striata, C. sinensis, and C. sinensis-longicorpus, 2) villous form of C. melanoleuca. Although C. lutheri, C. striata, C. sinensis, and C. sinensis-longicorpus possessed the same granular form, it was evident that fine structure of the zona radiata varied according to species. The adhesive membranes and fine structures of zona radiata in Cobitis showed a species specificity closely related to their habitats and spawning properties.

• Preventive Nutrition and Food Science
• /
• v.3 no.4
• /
• pp.303-308
• /
• 1998

Influence of amylose content on formation and characteristics of enzyme-resistant starch (RS) was investigated by scanning electron microscopy, X-ray diffractometry and differential scanning calorimetry. RS yield increased up to 36.1 % as the amylose content of corn starch increased. Starch granules of Amyulomaize V and Ⅶ were more rounded and smaller than those of regular corn ; some were elongated and had appendages. After autoclaving -cooling cycles, the granular structure disappeared and a continous spongy-like porous network was visible in regular corn starch ; the granular structure was stillevident in parts in Amylomaize V and Ⅶ starches. In all isolated RS residues , the porous structures were no longer visible and more compact formations predominated. While regular corn starch showed an A-type X-ray profile, Amylomaize V and Ⅶ starches exhibited a combination of B- and V-types. Regular corn starch lost most of its crystallinity during autoclaving , but the crystallinity was still left in Amylomaize starches as diffuse or poor B-types. All RS residues showed the presence of poor B-type regardless of amylose contents. Transition temperatures and enthalypy of native starches were a little higher in Amylomaize V and Ⅶ starches than those of regular corn starch . Regardless of amylose contents, all RS residues exhibited an endothermic transition over a similar temperature range (135 $^{\circ}C$~169$^{\circ}C$), with a mean peak temperature of ~154$^{\circ}C$, which is generally foud for retrograded amylose crystallities. Higher transition temperature, enthalypy, and RS yield of AMylomaize V and Ⅶ starches were related granular stability shown by the microscopic and crystallographic studies.