• 대한건축학회논문집:구조계
• /
• 제35권4호
• /
• pp.147-155
• /
• 2019

In this study, flexural tests of granite reinforced with titanium metal rods were carried out to repair and restore the damaged stone-made cultural heritage, the Stone Pagoda of the Mireuksa Temple Site. A total of twelve specimens were tested. The primary test parameters are the reinforcement ratio and the location of the reinforcement. For restoration, epoxy resin was used for joining the separated stones, and titanium metal rods were used for structural reinforcement. Test results showed that the flexural failure took place in specimens with a reinforcement ratio of 0.8% or less, and shear failure occurred when the reinforcement ratio was 1.68% or more. The peak load of the reinforced stone was found to be highly related to the reinforcement ratio. The peak load increased with increasing the reinforcement ratio. Also, the flexural behaviors of the reinforced stones were affected by the location of the reinforcement. Based on the test results, this study recommends the reinforcement ratio of the reinforced granite to induce ductile behavior.

• 터널과지하공간
• /
• 제21권1호
• /
• pp.33-40
• /
• 2011

본 연구에서는 온도와 수압이 암석의 물성 변화에 미치는 영향을 평가하였다. 온도가 암석의 물성에 미치는 영향을 평가하기 위하여 가곡광산에서 채취한 화강암과 석회암 시험편에 200, 300, 400, 500, 600, $700^{\circ}C$(석회암의 경우 $700^{\circ}C$는 제외하였음)의 열을 가하여 예열시험편을 제작하였다. 예열시험편에 대한 실내실험을 통해 비중, 유효공극률, 탄성파속도, 일축압축강도, 탄성계수, 포아송비를 측정한 결과 온도가 증가함에 따라 화강암과 석회암 예열시험편의 물성이 변하는 것으로 나타났다. 비중, 유효공극률, 탄성파속도의 급격한 변화는 화강암의 경우 $400^{\circ}C$ 이상에서 발생하였으며, 석회암의 경우에는 $300^{\circ}C$ 이상에서 나타났다. 온도에 따른 일축압축강도, 탄성계수, 포아송비의 변화도 물리적 특성의 변화와 유사한 것으로 나타났다. 예열시험편의 일축압축강도와 탄성계수로부터 유추한 500, 600, $700^{\circ}C$ 화강암 예열시험편의 GSI는 각기 81, 66, 58로 나타났으며, 400, 500, $600^{\circ}C$ 석회암 예열시험편의 GSI는 각각 76, 71, 65로 나타났다. 500, 600, $700^{\circ}C$ 화강암 예열시험편과 400, 500, $600^{\circ}C$ 석회암 예열시험편에 7.5 MPa의 수압을 가하였다. 수압을 적용한 예열시험편의 유효공극률, 탄성파속도, 일축압축강도, 탄성계수를 측정하여 평균한 결과 수압을 가하기 전 예열시험편에 비해 평균 감소량이 화강암 500, 600, $700^{\circ}C$ 예열시험편 각각에 대해서 7.6, 11.3, 14.9%로 나타났고, 석회암 400, 500, $600^{\circ}C$ 예열시험편에 대해서는 각기 8.2, 13.8, 21.9%로 평가되었다.

• 한국정밀공학회지
• /
• 제7권2호
• /
• pp.74-84
• /
• 1990

The machine tool structures for ultra-precision machining muxt be manufactured with materials which have high static and dynamic stiffness, high damping, a long term dimensional and thermal stability. This study aims at the development of new composite material Epoxy-Granite which exhibits the satisfactory characteristics as a material of ultra-precision mchine tool bed. The Epoxy-Granite testpieces that use epoxy resins as a binder and granite particles as a aggregate have been manufactured so as to examine the material properties about mechanical, thermal and damping characteristics. Experiments were carried out to obtain the proper manufacturing conditions of Expoxy-Granite specimens by varying the several testing conditions such as types of epoxy resins, particle sizes of granite and mixture ratio of epoxy resin and aggregate. Also, when Epoxy-Granite was compared with cast iron, GRANITAN which was imported from CMS of U.K. and granite materials, it has exhibited the superior or almost the same mechanical and damping properties and thermal conductivity, except for the thermal expansion.

• Computers and Concrete
• /
• 제22권1호
• /
• pp.93-100
• /
• 2018

It is seldom possible that geotechnical materials like rocks and concretes found without joints, cracks, or discontinuities. Thereby, the impact of micro-cracks on the mechanical properties of them is to be considered. In the present study, the effect of micro-crack on the failure mechanism of rock specimens under uniaxial compression was investigated experimentally. For this purpose, thermal stress was used to induce micro-cracks in the specimens. Several cylindrical and disk shape specimens were drilled from granite collected from Zanjan granite mine, Iran. Some of the prepared specimens were kept in room temperature and the others were heated by a laboratory furnace to different temperature levels (200, 400, 600, 800 and 1000 degree Celsius). During the experimental tests, Acoustic Emission (AE) sensors were used to monitor specimen failure at the different loading sequences. Also, Scanning Electron Microscope (SEM) was used to distinguish the induced micro-crack by heating in the specimens. The fractographic analysis revealed that the thin sections heated to $800^{\circ}C$ and $1000^{\circ}C$ contain some induced micro-fractures, but in the thin sections heated to $200^{\circ}C$, $400^{\circ}C$ and $600^{\circ}C$ have not been observed any micro-fracture. In the next, a comprehensive experimental investigation was made to evaluate mechanical properties of heated and unheated specimens. Results of experimental tests showed that induced micro-cracks significantly influence on the failure mode of specimens. The specimens kept at room temperature failed in the splitting mode, while the failure mode of specimens heated to $800^{\circ}C$ are shearing and the specimens heated to $1000^{\circ}C$ failed in the spalling mode. On the basis of AE monitoring, it is found that with increasing of the micro-crack density, the ratio of the number of shear cracks to the number of tensile cracks increases, under loading sequences.

• 한국지반공학회지:지반
• /
• 제13권6호
• /
• pp.13-24
• /
• 1997

화강풍화토는 국내 지반의 2/3이상을 차지할 정도로 광범위하게 분포하며 도로, 지하철, 사면조성, 건물의 기초설치 등 여러 건설현장에서 빈번히 접할 수 있다. 화강풍화토의 입자구조는 풍화정도와 모암의 구성광물에 의해 영향을 받고 특히 보통의 구속 암에서도 입자 파쇄가 발생하며 비교란 지반의 특성과 다짐토 지반의 특성이 큰 차이가 있다. 본 연구에서는 현장에서 직접 삼축시험용 비교란 화강풍화토시료를 채취할 수 있는 시료채취기를 개발하였고 이를 이용하여 채취한 비교란 시료와 정적으로 다져진 시료에 대하여 공진주/비틂 전단시험과 삼축압축시험을 수행하였다. 시험결과로부터 미소한 변형률에서의 거동특성과 비교란 및 다짐 화강풍화토의 강도특성을 검토하였다. 대상으로 한 지반의 경우 1% 이내의 미소한 변형률 영역에서는 다짐시료와 비교란시료의 탄성계수가 거의 일치하였으며 강도의 뚜렷한 차이 또한 발견할 수 없었다. 비교란화강풍화토의 경우는 시료의 불균일성 등으로 인하여 파괴시의 변형률이 매우 넘게 분포하였다.

• 한국지반공학회논문집
• /
• 제26권6호
• /
• pp.21-28
• /
• 2010

화강풍화토는 가장 일반적인 흙의 종류이다. 비등방성 화강풍화토의 응력-변형-강도를 측정하는 것은 사면, 옹벽, 굴착의 변형과 안정을 위하여 매우 중요하다. 불포화 강도특성을 알기 위하여 일련의 불포화 배수삼축압축시험을 시행하였다. 시험시료는 다짐방향에 각각 0, 45, 90도의 축방향각을 갖도록 하였다. 등방압축을 받는 시료의 축변형률은 다짐방향에 의하여 크게 영향을 받으며 이차압축과정에는 시간의존성은 다짐방향과 관계가 거의 없다. 삼축압축강도와 변형에 미치는 다짐방향의 영향은 저구속압과 포화토에서 더 확연한것으로 나타났다. 다짐방향과의 각도를 고려하는 불포화화강풍화토의 강도를 추정하는 방법을 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.601-606
• /
• 2002

This study explored physical properties of a hardened cement and a concrete specimen using a high performance cement type solidification consisting of a weathered granite soil and a yellow soil mainly. Also the development of high performance cement type solidification was purposed for an intensity improvement and a long-term durability. As the experimental results, a mortar used by the weathered granite soil shows positive result, however using the yellow soil as a mortar Shows less positive result at the compressive strength. Also the dynamic modulus of elasticity measurement result, the concrete specimens used by the weathered granite and the yellow soil reached above 90%, so it seems to have the durability of freezing and thawing.

• Computers and Concrete
• /
• 제18권5호
• /
• pp.969-982
• /
• 2016

This paper investigates the compressive fatigue behaviour of polypropylene fibre reinforced self compacting concrete with Granite Sawing Waste (GSW). An experimental programme was conducted to obtain the fatigue lives of fibre reinforced self compacting concrete (FRSCC) at various stress levels. The stress ratio was kept constant as 0.3. Compressive fatigue test was conducted on 60 cubic specimens with 100mm edge length and 0.1% of polypropylene fibres at a frequency of 0.05Hz. The test results indicate that the fatigue lives of concretes containing granite sawing waste follow the double-parameter Weibull distribution. The fatigue strength equations have been developed based on different probabilities of failure.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.461-470
• /
• 2022

Solid waste management is of great concern in today's world. An enormous amount of waste is generated from various industrial activities. Concrete production utilizing some of the potential waste materials will add to the benefit of society. These benefits will include reduction of landfill burden, improved air quality, riverbed protection due to excessive sand excavation, economical concrete production and much more. This study aims to utilize waste granite powder (GP) originating from granite industries as a sand replacement in concrete. Fine GP was collected in the form of slurry from different granite cutting industries. In this study, GP was added in an interval of ten percent as 10%, 20%, 30%, 40% and 50% by weight of sand in concrete. Mechanical assets; compressive strength, flexural strength and splitting tensile strength were prominent for control and blended mixes. Modulus of elasticity (MoE) and abrasion tests were also performed on control and blended specimens of concrete. To provide a comprehensive clarification for enhanced performance of GP prepared concrete samples, scanning electron microscopy (SEM) and X-ray diffraction (XRD) were performed. Results indicate that 30% replacement of sand by weight with GP enhances the mechanical assets of concrete and even the results obtained for 50% replacement are also acceptable. Comprehensive analysis through SEM and XRD for 30% replacement was better than control one. The performance of GP added to concrete in terms of abrasion and modulus of elasticity was far better than the control mix. A significant outcome shows the appropriateness of granite fines to produce sustainable and environmentally friendly concrete.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.73-82
• /
• 2004

This paper studies the leaching behaviors of pyrochlore-rich synroc incorporated 46.8wt% simulated actinides waste under the five simulated geological disposal media, which included the bentonite, granite, granite ＋ ferroferric oxide, granite ＋ cement, bentonite ＋ ferroferric oxide, respectively. The mass loss rates reached to equilibrium after 182 day and was 10-7 g/$\textrm{mm}^2{\cdot}d$. That suggests the mass loss rate of pyrochlore-rich synroc, loaded 46.8wt% actinides waste, was very low. The surfaces of the leached specimens were analyzed by XRD, SEM/EDS. The experimental results show that the pyrochlore-rich synroc samples in the systems, which contained bentonite and cement, have two new phases formed on the leached specimens surface at $90^{\circ}C$ for 728d; The bentonite and cement can retard the elements leaching; $Fe_3O_4$ can speed the elements leaching; Expect for Ti ion depleted on the sample surface, other ion, such as U, Zr, AI, Ca, were in equable states and Ba ion was enriched during test time, which indicated the simulated disposal media have good ability to retard the leaching behavior of the pyrochlore-rich synroc.