• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.545-551
• /
• 2015

The aim of this research is suggesting application method of the wasted rock obtained from the limestone quarry of raw material for cement as a coarse aggregate for high strength concrete after crushing and sieving processes. The wasted rock has been normally wasted because of its low quality as a material for cement production. In this research, the concrete using this wasted limestone coarse aggregate was evaluated the constructability based on the performances of workability, air content, and compressive strength. From the experiment, a favorable performance was achieved with a limestone coarse aggregate for high strength concrete comparing to the high strength concrete using granite coarse aggregate.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.3 s.45
• /
• pp.154-166
• /
• 2006

Though there are more than 600 active and non-active dimension stone quarries in Korea, most quarries are small-scaled and non-active. Main dimension stone belt in Korea is distributed in the Wonju-jecheon-Mungyeong-Geochang-Jinan-Nanwon-Geogumdo area with NNE direction, which occupies about 50% of domestic dimension stone quarries. The other dimension stone belts occur in the Gangyeong-Iksan-Gimje area, the Pocheon-Ujeongbu area and the Boryeong area. The dimension stones in Korea have been produced from at least fifteen rock types: granite, diorite, syenite, gabbro, homblendite, basalt andesite, rhyolite, tuff felsite, sandstone, marble, gneiss, schist and slate. However, seven or eight rock types such as granite, diorite and marble are currently produced. The dimension stones are quarried out 87% from plutonic rocks (mainly granite and diorite), 6% from sedimentary rocks (mainly sandstone), and 3% from metamorphic rocks (mainly marble). Main rock types of the dimension stones are variable with respect to their production locality. In the Jeollanam-do area, most dimension stones are produced from diorite. Marble is mainly produced from the Gangwon-do and Chungcheongbuk-do areas. Black sandstone is exclusively quarried out from the Chungcheongnam-do area. Granite is most abundant dimension stone in Korea. Above 50% of the domestic dimension stones are medium-grained to coarse-grained granitic rocks, but fine-grained granite dimension stones have 10% of distribution. The color of the dimension stone varies with rock types. Most granite dimension stones have dominant colors of whitish gray and gray, which are produced from the Wonju, Gapyeong, Iksan, Namwon and Geochang areas. Pink-colored granites are rarely produced from the Mungyeong area.

• Economic and Environmental Geology
• /
• v.9 no.4
• /
• pp.177-212
• /
• 1976

The Shap granite encloses well developed quartz veins and veinlets containing molybdenite in association with other ore sulphide minerals. The preliminary study of the geochemical aspects of the granite stock and mineralisation of molybdenite in comparison with the porphyry deposits is carried out; the distribution of major, minor and ore metal elements in wall rocks, altered envelope and veins, and the molybdenum mineralisation, mainly in connexion with hydrothermal alteration are discussed. The molybdenite and other ore mineralisation, especially bismuthinite and chalcopyrite, are spatially closely related to the hydrothermal alteration adjacent to the veinings, and are dominant where the strong orthoclase alteration has taken place. A pattern of alteration and mineralisation can be recognised and forms the basic for the subdivision of the quarry into several distinct zones, which correspond with the sequence of alteration and mineralisation. The veins, veinlets and their alteration haloes can be further subdivided into a series of concentric zones.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.193-207
• /
• 2015

This study analyzed ancient documents and established petrological database through extensive field investigation of provenance sites to presume stone source areas of the Seoul City Wall. By summarizing the ancient documents, the rampart stone was mostly supplied from a stony mountain adjacent to the City Wall in the early Joseon period, whereas the stone was provided from fixed quarry outside the City Wall in the late Joseon period. As a result of the petrological investigation based on quarries recorded in the ancient documents, pinkish granite and leucogranite were distributed as a whole, and the granitoid rocks are similar in mineralogical compositions and geochemical behavior characteristics. However, the pinkish granite with magnetic-series show that the magnetic susceptibility increased from the north slope of Namsan Mountain to Bulamsan Mountain. The leucogranite with ilmenite-series mainly occurred along the boundary between granite and gneiss from Yongmasan Mountain to Inwangsan Mountain. Consequently, the important petrological indicators for presumption of stone source areas are the rock color and the magnetic susceptibility. In addition to the petrological features, the reliability for provenance interpretation should improve considering stone quantities in the quarries, transportation distance and technical skills.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.196-212
• /
• 2023

This study identifies the origin of stone remains (pavement and banister stones) excavated from the first burial site of King Jeongjo through petro-mineralogical analysis in a quarry and examines the relationship with the stone remains from Geolleung (King Jeongjo's Tomb). The excavated stones from the first burial site of King Jeongjo are all light gray fine-grained biotite granite, and mainly contain quartz, feldspar, and biotite. The magnetic susceptibility of the stones ranges from 5.55 to 12.10 (average 7.00) (SI unit). According to old documents, the quarrying sites of the stones were Mts. Aengbong and Yeogisan (Godeung-dong District, Suwon), and we found a fine-grained biotite granite outcrop behind Mr. Aengbong (currently the site of Yeonggwang Apartment) with a geological survey, and it was petrologically similar to the stone remains from the first burial site. The magnetic susceptibility of the outcrop rocks was 5.15 to 7.24 (SI unit), and their petro-mineral and geochemical characteristics were found to be the same as those of the first buried site and Geolleung Tomb. It was confirmed that most of the stone elements in the first burial site were reused to build Geolleung Tomb while moving the grave. Only the pavement and banister stones seem to have been discarded in the first grave site without being transferred. This is because the size of the new burial mound became larger than the first grave during construction because Queen Hyoui (the consort of King Jeongjo) died and was buried together with the king in the same tomb, and the stone blocks did not fit a grave that size. With these research results, it was possible to compare and examine the old records and scientific analysis data, and they are expected to be used as basic source material in related research.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.647-659
• /
• 2023

This study is to analyze the lithological similarities between railing stones of Gwanghwamun Woldae and stone blocks stored in Donggureung Royal Tombs, Guri, to interpret the provenance of the stones, and to suggest the most suitable quarry for a new stones supply among the rocks in the Seoul-Pocheon area in order to select stones for the restoration of the Gwanghwamun Woldae. The railing stones in Donggureung are medium to coarse-grained pink biotite granite, and their lithological characteristics, magnetic susceptibility(Average 5.20 ×10^-3 SI unit), and gamma spectrometer data(K 5.00~6.38%, U 4.92~8.56 ppm, Th 27.60~36.44 ppm) show similarities with the remaining railing stones in Gwanghwamun Woldae(Average 5.38). Therefore, the railing stones in Donggureung can be reused for the restoration of Gwanghwamun Woldae. They have similar lithological and geochemical charateristics to the pink biotite granite found the Suraksan Mt. and Buramsan Mr. areas in Seoul, suggesting that these areas are the source of the stone. However, since the Suraksan Mt. and Buramsan Mt. areas are currently unavailable for quarrying, lithological and geochemical analyses on granite from the Yangju and Pocheon areas are conducted to determine the suitability of the new stone for restoration. As a result, a pink biotite granite similar to the Woldae stones was identified in the Pocheon area, and it is suggested that the stones similar in grain size and colour to the railing stones of Gwanghwamun Woldae should be selected and used for the restoration of Gwanghwamun Woldae.

• The Journal of Engineering Geology
• /
• v.5 no.3
• /
• pp.237-274
• /
• 1995

This study was focused on the improvement of the measurement technique of P-wave velocity for the assesment of the anisotropy of the engineering property of rock. Samples used were collected from a working quarry within the Carnmenellis granite area on which series of engineering geological data have been accumulated. This study mainly concerned the development of measurement technique at the curved surface of rock, the use of natural honey-based coupling agent and the drying method for rock specimen over $P_2O_5$. According to the results, the range of the P-wave velocity anisotropy in two dimensional plane, fell between 0 and 4.68 (%). The direction where maximum velocity occurred was parallel to the orientation of the maximum in-situ stress. The result showed that P - wave velocity is a useful measure to asses the anisotropy of the engineering property of rock and it is suggested that the improvements adopted here can be applied to the experimental work on the rocks in Korea.

• Geomechanics and Engineering
• /
• v.36 no.5
• /
• pp.465-474
• /
• 2024

Uniaxial compressive strength (UCS) is a critical geomechanical parameter that plays a significant role in the evaluation of rocks. The practice of indirectly estimating said characteristics is widespread due to the challenges associated with obtaining high-quality core samples. The primary aim of this study is to investigate the feasibility of utilizing the gene expression programming (GEP) technique for the purpose of forecasting the UCS for various rock categories, including Schist, Granite, Claystone, Travertine, Sandstone, Slate, Limestone, Marl, and Dolomite, which were sourced from a wide range of quarry sites. The present study utilized a total of 170 datasets, comprising Schmidt hammer (SH), porosity (n), point load index (Is(50)), and P-wave velocity (Vp), as the effective parameters in the model to determine their impact on the UCS. The UCS parameter was computed through the utilization of the GEP model, resulting in the generation of an equation. Subsequently, the efficacy of the GEP model and the resultant equation were assessed using various statistical evaluation metrics to determine their predictive capabilities. The outcomes indicate the prospective capacity of the GEP model and the resultant equation in forecasting the unconfined compressive strength (UCS). The significance of this study lies in its ability to enable geotechnical engineers to make estimations of the UCS of rocks, without the requirement of conducting expensive and time-consuming experimental tests. In particular, a user-friendly program was developed based on the GEP model to enable rapid and very accurate calculation of rock's UCS, doing away with the necessity for costly and time-consuming laboratory experiments.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.211-222
• /
• 2011

The Mireuksaji stone pagoda was built foundation in the reign of King Moo (AD 639) in the Baekje Kingdom of ancient Korea. The stone properties of the pagoda were quarried from Mountain Mireuk, which are medium to coarse-grained light gray biotite granite formed during the Jurassic, and are composed of quartz, feldspar, biotite, muscovite, apatite and allanite. It was strong relatively but became weak from prolonged weathering, and as a result its durability fell to $883kgf/cm^3$ (moderate weathering degree). In the process, cut-off (31%), deletion (57%) and crack (44%) occurred in foundation materials by the influence of bending, shear and compressive force. Hereat, the original materials were treated through a preservation process. As a result, approximately 74% of original materials have been able to be reused, inclusive of 55 materials that were to be partially replaced by new stones. On the other hand, it is inevitable that the other 26% including exterior stones and support-based stones have to be partially replaced by new stones. It implies that there is a need to find stones that are identical or similar to those of the pagoda. Consequently, a lithological study was conducted on stones in quarries located in Iksan and an investigation was made into their properties. The results showed that stones in the Hwangdeung area were most similar to those of the pagoda mineralogically and their properties were most stable.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.1 s.47
• /
• pp.12-26
• /
• 2007

We have studied orientational characteristics of vertical rift and grain planes developing in 108 quarries for Mesozoic granites. Orientations of these planes vary in different localities. In general, orientations of these planes are predominantly NNE in South Korea. From the regional distribution chart, orientations of these planes show three dominant sets in terms of frequency orders: (1) $N2{\sim}10^{\circ}E(1st-order),\;(2)\;N15{\sim}25^{\circ}E(2nd-order),\;(3)\;N45{\sim}70^{\circ}E,\;N10{\sim}30^{\circ}W\;and\;N70{\sim}80^{\circ}W(3rd-order)$. These granite quarries are classified by the relative difference in the easiness of rock splitting between horizontal and vertical quarrying planes into: R-type, G-type, and H-type. The results showed that quarries for Triassic granites belong to R and G-types;those for Jurassic granites belong to R, G and H-types. In addition, quarries for Cretaceous granites belong mainly to R-type. Among these quarry types, the most diverse type was identified in the quarries for Jurassic granites. R-type (77.8%) shows a higher distribution ratio compared with G and H-types (22.2%). In general, anisotropy of physical properties is found in granitic rocks and there exists close correlation between orientations of granitic rock splitting planes and those of the open microcracks. Meanwhile, it has been reported that preferred orientations of open microcracks suggest maxinum principal stress orientations.