• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.292-300
• /
• 2013

In this study, we examine the palatability and physicochemical properties of rice in the year, when there was 10% increase in yield compared to normal year due to daily temperature range and sunshine hours. The results of the analysis of rice yield over the last 20 years (1993-2012) showed 10% difference between the yield in 2000, which was normal, and that in 2001. With regard to the crop weather condition during the ripening period in 2001 compared to 2000, the daily range and sunshine hours were higher, but the mean temperature was similar. The rice yield in 2001 was 9.8% higher than that in 2000 due to the increased number of spikelets per panicles and ratio of ripened grain. In terms of chemical traits, protein, Mg, and K contents decreased in 2001 compared to 2000, but amylose content increased. Trough and final viscosity assessed with a Rapid Visco Analyser were significantly higher in 2001 than 2000. The quality of cooked rice was measured through the Toyo Mido Meter Glossiness Value (TGV) instead of a palatability score because a sensory test produces relative comparison values rather than absolute values. The correlation coefficients between the sensory evaluation parameters and the TGV in several rice materials harvested in two years showed a highly significant positive correlation ($r=0.81^{**}-0.89^{**}$, n=27-47). TGV was also significantly higher in 2001 than in 2000. The results suggested that the palatability of cooked rice was good in 2001 with about 10% increase in rice yield compared to normal year in 2000 due to daily temperature range and sunshine hours.

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.271-275
• /
• 1972

Effects of solvent extraction by immersion on the quality and storage stability of Korean rice were studied. Proportions of lipid extracted from whole grain of rice by immersing into two volumes(v/wt) of hexane and ethanol for 72 hours at room temperature were 0.41% and 0.38% respectively. Small changes of water content and hardness of rice were observed by solvent treatment. Cooking characteristics; that is, water-uptake ratio. extended volume, total solid, and starch-iodine blue test of rice was markedly changed by ethanol treatment, while little changes were observed by hexane treatment. No considerable differences in moisture sorption isotherm of rice were observed by both solvent treatments. Changes in TBA number and stale flavor appearance of rice treated with or without solvent immersion during storage at $60^{\circ}C$ showed that rice treated with hexane had best storage stability compared to ethanol treatment, while ethanol treatment of rice had better storage stability than no treatment. Similar results were noted in changes of the flavor score of cooked rice samples which were freeze dried.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.165-180
• /
• 2015

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The phases of distribution of microcracks were well evidenced from the enlarged photomicrographs(${\times}6.7$) of the thin section. In this study, the length - cumulative frequency diagrams were used for expressing the distribution characteristics of microcrack. The diagrams for the six directions were arranged in the magnitude of density(${\rho}$). These diagrams show an order of H2 < H1 < G2 < G1 < R2 < R1 from the related chart. Among six diagrams, the diagram for hardway 2(H2) occupies the lowermost region on the left. On the contrary, the diagram for rift 1(R1) occupies the uppermost region on the right. Curve patterns of the two diagrams change from uniform to exponential distribution type in accordance with the increased density. The overall distribution characteristics of the diagrams were well evidenced from the magnitude of the exponent(${\lambda}$) and length of line oa related to the exponential straight line. The magnitude of exponent governing the values of slope(${\theta}$) is inversely proportional to the values of microcrack parameters such as number(N), length(L) and density. On the contrary, length of line oa is directly proportional to the values of the above three parameters. Above microcrack parameters related to the order of arrangement of diagrams show an order of hardway(H1 + H2) < grain(G1 + G2) < rift(R1 + R2). The distribution characteristics of progressive variation are found among the six diagrams. The order of arrangement of the diagrams indicates a relative magnitude of the rock cleavage. Meanwhile, the parameters such as slope, exponent, density and length of line oa were arranged in an order of H2 < H1 < G2 < G1 < R2 < R1. The variation curves of a smooth quadratic function are shown from the related chart. From the correlation chart between density and the above parameters, a common regularity following power-law correlation function was derived. Finally, the analysis for the rock cleavage was conducted through the combination between the diagram and microcrack parameter. This type of combination contribute to the progressivity in evaluation for the rock cleavage.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.1-14
• /
• 2017

In Korea, the soil series derived from sedimentary rocks are classified into seven soil series of coarse loamy soil such as Dain, Danbug, Dongam, Imdong, Jeomgog, Maryeong, and Yonggog; seventeen soil series of fine loamy soil such as Angye, Anmi, Banho, Bigog, Deoggog, Dogye, Dojeon, Gamgog, Gugog, Jincheon, Maji, Mungyeong, Oggye, Samam, Yanggog, Yeongwol, and Yulgog; six soil series of fine silty soil such as Goryeong, Bonggog, Juggog, Gyeongsan, Yuga, and Yugog; and four soil series of clayey soil such as Mitan, Pyeongan, Pyeongjeon, and Uji. All thirty-four soil series have different drainage rates and topography. However, the soil texture depends on the parent rock. The buffer functions in GIS (Geographic Information System) techniques were used to calculate adjacent soil series from a soil series. The length of the adjacent soil series was adjusted because a side of the buffer area was one meter long. The cluster analysis was conducted using the CCC (Cubic Clustering Criterion) method, in which the number of clusters is calculated based on the individual soil series ratio. Soil survey has been carried out since 1964 as "The reconnaissance soil survey", and 1:5,000 detailed soil survey was completed in 1999 with a five-years plan in Korea. Today, all the soil survey information has been computerized. GIS techniques were used to establish a digital soil map; however, there have not been any studies to interpret pedogenesis using the GIS technique. In this study, the area of the adjacent soil series were obtained using the GIS technique. The area of the adjacent soil series can be calculated based on the information area. The similarities of soil originated from sedimentary rocks were estimated using the length. As a result, the distribution of grain size was different based on the types of sedimentary rocks and the location. The clusters were distinguished into limestone, sandstone, and shale. In addition, the soil derived from shale was divided into red shale and gray shale. This means that quantitative interpretation of the catena and this established method can be used to interpret the relationship between soil series.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.80-88
• /
• 2014

This study was carried out to understand the effect of sowing date on growth characteristics, flower duration of a total of 6 domestic rapeseed cultivars, "Sunmang", "Tammiyuchae", "Tamlayuchae", "Naehanyuchae", "Yongsanyuchae" and "Hallayuchae" with different sowing dates (25 Sept., 5 Oct., 15 Oct., 25 Oct., 5 Nov.) in Muan, Jeollanamdo, Republic of Korea. The results obtained were summarized as the follows: The number of seedling stand after overwintering was decreased in all 6 cultivars. It changed little until 5 Oct., and then showed continuously largely decrease as the sowing date being delayed. As the sowing date was being delayed, plant height was decreased while Silique length and thousand seed weight were increased. Seed yield in all 6 cultivars decreased almost linearly with late sowing date. In correlation analysis between the delaying sowing date and growth characteristics, it was inversely correlated with plant height ($r=-0.769^{**}$), No. of branches/plant ($r=-0.760^{**}$), No. of siliqua/panicle ($r=-0.631^{**}$) and seed yield ($r=-0.946^{**}$), while showed a positive correlation with silique length (r=0.635), seed diameter ($r=0.629^{**}$) and thousand grain weight ($r=0.422^*$). No. of seeds/silique and seed set percentage were not significantly correlated with the delaying sowing date. The flower duration was long in order of Sunmang, Tammiyuchae, Yongsanyuchae, Naehanyuchae, Hallayuchae and Tamlayuchae. Varietal variation of flowering date was larger with early sowing date than with delaying sowing date. The range of flower duration across all cultivars was from 1 day of Tamlayuchae to 14 days of Sunmang according to the sowing date, and the end flowering date was able to be extended from 2 to 9 days, compared to normal date of end flowering.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.298-303
• /
• 1981

A study was conducted to find out the varietal difference in some important agronomic characters in response to different seeding time in barely from 1975 to 1976 at Chikugo Agric. Expt. Station in Japan. Thirteen varieties which are diverse in growth period were used. Nine seeding time were tried. Seedling emergence, primary tillering, and formation of flower primodia were delayed in proportion to the seeding time. And also heading and maturing time showed the same tendency. This tendency appeared more conspicuous in the late maturing varieties. Therefore, days to heading and maturing duration were inversely shortened by the delay of seeding time and by earliness of variety. Number of spikes as well as culm length and spike length was reduced in the late seeding. Grain yield was reduced in all varieties by late seeding, easpecially with late maturing varieties. In this test, widely adaptable variety to late seeding time was not found, but earliness and high tillering in growth habit appeared more favorable to yield increase.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.57-66
• /
• 2013

The purpose of this study was to investigate the effects of shifts in sowing time on the ecological responses, growth and yields of major soybean cultivars in a southern region of South Korea. Experiments were carried out in Naju, Jeonnam Province (latitude $35^{\circ}$ 04'N, longitude $126^{\circ}$ 54'E) for three years from 2008 to 2010. The test cultivars included Saeol-kong and Tawon-kong of the summer type, Taekwang-kong and Pungsannamul-kong, and Cheongja3 of the autumn type. Sowing took place on May 15 and 30, June 15 and 30, and July 15 of each year. Of the summer type soybean cultivars, Saeol-kong showed a smaller curtailment in days from sowing to flowering, days from flowering to maturity, and days from sowing to maturity according to sowing time postponement than Tawon-kong. Of the autumn type soybean cultivars, Taekwang-kong exhibited a lower photoperiodic response in reproductive growth period than Pungsannamul-kong and Cheongja3, both of which recorded higher level photoperiodic responses in vegetative growth stages and reproductive growth periods than other test cultivars, with the former exhibiting higher levels than the latter. Most of the test cultivars tended to decrease in stem length, node numbers of the main stem, and stem diameter according to postponed sowing time, but there were no significant differences in stem length and node numbers of the main stem of the Saeol-kong cultivar. Differences in sowing times did not affect the first setting pod node order of Saeol-kong and Tawon-kong summer type cultivars of internode lengths of all of the test cultivars. All of the test cultivars tended to show decreases in pod number per plant due to postponement of sowing time except for the Saeol-kong cultivar. The variation was more prominent in small grain cultivars such as Tawon-kong and Pungsannamul-kong with the latter autumn type cultivar showing especially large variation. Yields were the greatest for the Tawon-kong, Taekwang-kong, and Pungsannamul-kong cultivars sown on May 30 and Cheongja3 sown on May 30 and June 15. There were no significant differences in the yields of Saeol-kong for different sowing times from May 30 to July 15, with the yields lowest for the batch sown on May 15.

• Korean Journal of Soil Science and Fertilizer
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1970

The effect of wollastonite and manganese dioxide on the growth of rice on an acid sulfate soil were investigated in pot experiment. 1. Since aluminum content in the leachate of soil was reduced with increasing the pH and these chemical changes in the leachate were more pronounced by applying wollastonite, aluminum toxicity in flooded paddy rice was overcome by applying wollastonite, or flooding. 2. Poor growth of rice with iron toxicity-like symptoms on the untreated acid sulfate soil may be caused by excess iron and sulfur. Plants applied wollastonite, however, grew normally and did not show any symptoms. Iron and sulfur contents in the plant was reduced by applying wollastonite. 3. Because of the iron content in the both leachate and plant can be lowered by applying wollastonite, iron-toxicity was averted by applying the wollastonite. 4. Application of manganese dioxide in combination with wollastonite did not counteracted iron content in the plant as compared with the wollastonite treatment. 5. The application of wollastonite increased the dry weight of straw and grain yield. Manganese dioxide with wollastonite caused the increase of number of spickelets per panicles and ripened grains as compared with wollastonite. 6. From these results it can be concluded that the major cause of the poor growth of rice on acid sulfate soil is iron toxicity and the Fe-toxicity can be reduced by application of wollastonite.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.328-331
• /
• 2008

Hwangeumnodeul is a new japonica rice cultivar developed from a cross between Milyang165 and HR15151-B-21-3 at Honam Agricultural Research Institute (HARI), NICS, RDA, in 2007. This cultivar has short grains and about 139 days of growth duration from direct seeding to harvesting in the southern plain areas. Culm length of this cultivar is 78 cm and the number of spikelet per panicle is similar to that of the check cultivar, Nampyeongbyeo, while filled grain rate is lower than the check variety. This cultivar is moderately resistant to leaf blast, bacterial blight pathogens of $K_1$, $K_2$ and $K_3$ and stripe virus but susceptible to major virus diseases and insect pests. Milled kernel of Hwanggeumnodeul is translucent with non-glutinous endosperm. This cultivar has about 5.7% and 18.6% of protein and amylose contents, respectively. Palatability of cooked rice of Hwanggeumnodeul is similar to Nampyeongbyeo. Its milling recovery and head rice were 75.6% and 90.0%, respectively. Hwanggeumnodeul yielded 5.69 and 5.61 MT/ha in milled rice at the under wet-direct and dry-direct seeding conditions, respectively which are 17% and 12% higher than the check variety, Juanbyeo. It yielded 5.86 MT/ha, 8% higher than Nampyeongbyeo at the standard fertilizer level of the ordinary transplanting cultivation. "Hwanggeumnodeul" would be adaptable for ordinary transplanting as well as direct seeding in the southern plain including Chungcheong province.