• 제목/요약/키워드: grain growth inhibition

검색결과 52건 처리시간 0.022초

수정합성공정에 의한 무연 (1-x)BaTiO3-x(Bi0.5Na0.5)TiO3 (0.01≤x≤0.10) 세라믹의 PTCR 특성 연구 (Investigation on PTCR Characteristics of (1-x)BaTiO3-x(Bi0.5Na0.5)TiO3 (0.01≤x≤0.10) Ceramics by Modified Synthesis Process)

  • 김경범;김창일;정영훈;이영진;백종후;이우영;김대준
    • 한국전기전자재료학회논문지
    • /
    • 제23권12호
    • /
    • pp.929-935
    • /
    • 2010
  • $(1-x)BaTiO_3-x(Bi_{0.5}Na_{0.5})TiO_3$ ($0.01{\leq}x{\leq}0.10$) ceramics were fabricated with muffled sintering by a modified synthesis process. Their positive temperature coefficient of resistivity (PTCR) characteristics were investigated systematically. All specimen showed a perovskite structure with a tetragonal symmetry. Both the lattice parameter of a and c axes were slightly decreased with increasing $(Bi_{0.5}Na_{0.5})TiO_3$ (BNT) content. Grain growth was achieved when the incorporated BNT was increased to 6 mol% and the inhibition of grain growth is considered to be due to the appearance of Ba vacancy ($V^{"}_{Ba}$) in the $(1-x)BaTiO_3-x(Bi_{0.5}Na_{0.5})TiO_3$ ($0.08{\leq}x$). With 4 mol% BNT addition, room temperature resistivity decreased to $48 \Omega{\cdot}cm$ and a resistivity jump ($\rho_{max}/\rho_{min}$) was as high as $1.1{\times}10^4$, respectively. Curie temperature was also increased to $171^{\circ}C$ with increasing BNT content.

Mesotrione 함유 제초제에 대한 벼 생태형간 약해반응 차이 (Differential Tolerance of Rice Cultivars to Mesotrione-Contained Herbicides)

  • 김상열;이지윤;여운상;오성환;박성태;이종희;정국현;조준현;송유천;강항원
    • 한국잡초학회지
    • /
    • 제30권3호
    • /
    • pp.300-307
    • /
    • 2010
  • 최근에 등록된 mesotrione+pretilachlor(MP) 및 bensulfuron-methyl+mesotrione+pretilachlor+pyriftalid (BMPP)에 대한 벼 생태형간 약해 반응을 조사하기 위해 통일형(장립종) 및 일본형(단립종) 각 3 품종을 표준량과 2배량을 처리하여 온실에서 포트시험한 결과는 다음과 같다. 제초제 MP 및 BMPP에 대한 약해 반응은 벼 생태형에 따라 달랐는데 통일형 품종은 모두 감수성을 보였으나 일본형 벼는 약해가 발생하지 않았다. 통일형 벼는 제초제 처리 후 5일부터 백화증상을 보였고 7일에 약해증상이 뚜렷하였으며 처리 후 14일에는 약해증상이 처리 후 7일 보다 약해지는 경향이었다. 약해정도는 처리농도가 증가할 수록 약해 발생이 심하였다. MP 및 BMPP에 대한 통일형 벼 품종의 초장 억제율은 90g a.i. $ha^{-1}$(표준량)에서 18~43%, 배량에서 30~50% 억제되었고 건물중은 초장보다 억제가 더 커 표준량에서는 46~73%, 배량에서는 65~82%가 억제되었고 억제정도는 농도가 증가할수록 컸다. 하지만 대부분의 일본형 벼는 제초제 2배에서도 약해증상을 보이지 않았으나 초장 및 건물중이 약간 억제 되었다. 벼 생태형별 MP에 대한 50% 생육억제 농도를 조사한 결과, 통일형 벼는 37g a.i. $ha^{-1}$로 일본형 벼의 476g a.i. $ha^{-1}$보다 12.9배나 낮았다. 이상의 결과에서 mesotrione을 함유하고 있는 MP 및 BMPP에 대한 벼 생태형간 반응에 차이가 있고, 초다수형 벼 재배시 초기 잡초 발아전 제초제로서 MP 및 BMPP의 사용을 자제하는 것이 바람직하다.

Selection and Characterizations of Gamma Radiation-Induced Submergence Tolerant Line in Rice

  • Lee In-Sok;Kim Dong-Sub;hua Jin;Kang Si-Yong;Song Hi-Sup;Lee Sang-Jae;Lim Yong-Pyo;Lee Young-Il
    • Journal of Plant Biotechnology
    • /
    • 제5권3호
    • /
    • pp.173-179
    • /
    • 2003
  • The combination of a radiation technique with an in vitro culture system was appiled to develop submergence tolerant rice. The 3,000 $M_3$ lines with an average 80 percent of fertile grain were utilized for the selection of submergence tolerance. Salt tolerant lines were selected based on high plant height, root length and root number after submergence in plastic pots. Of the lines tested, the tolerant line (403-6) showed a dramatic difference in morphological traits under submergence compared to its original variety (Dongjinbyeo). It was suggested that genetic variations between the original variety and $M_3$-403-6 did exist. The levels of $\alpha$-amylase and alcohol dehydrogenase activities were significantly increased in the mutant line compared to its original variety. The mutant with greater tolerance showed less electrolyte leakage indicating a greater membrane integrity and better survival. Also, this line was much more resistant to a salt stress of $1.25\%$ than the original variety. The proline level of the line was significantly (p<0.01> higher than that of the original variety. The relationships between the inhibition of growth caused by stress and the physiological changes in the plant cell were discussed.

급속 소결에 의한 인공관절용 나노구조 2/3 Cr-ZrO2 복합재료 제조 및 특성 (Properties and Fabrication of Nanostructured 2/3 Cr-ZrO2 Composite for Artificial Joint by Rapid Sinerting)

  • 강현수;강보람;손인진
    • 한국재료학회지
    • /
    • 제24권9호
    • /
    • pp.495-501
    • /
    • 2014
  • Despite having many attractive properties, $ZrO_2$ ceramic has a low fracture toughness which limits its wide application. One of the most obvious tactics to improve its mechanical properties has been to add a reinforcing agent to formulate a nanostructured composite material. Nanopowders of $ZrO_2$ and Cr were synthesized from $CrO_3$ and Zr powder by high energy ball milling for 10 h. Dense nanocrystalline $2/3Cr-ZrO_2$ composite was consolidated by a high-frequency induction heated sintering method within 5 min at $600^{\circ}C$ from mechanically synthesized powder. The method was found to enable not only rapid densification but also the inhibition of grain growth, preserving the nano-scale microstructure. Highly dense $2/3Cr-ZrO_2$ composite with relative density of up to 99.5% was produced under simultaneous application of a 1 GPa pressure and the induced current. The hardness and fracture toughness of the composite were 534 kg/mm2 and $7MPa{\cdot}m1/2$, respectively. The composite was determined to have good biocompatibility.

초고온용 ZrB2-계 세라믹스의 치밀화와 물성 (Densification and Properties of ZrB2-based Ceramics for Ultra-high Temperature Applications)

  • 김성원;김형태;김경자;서원선
    • 한국정밀공학회지
    • /
    • 제29권3호
    • /
    • pp.273-278
    • /
    • 2012
  • $ZrB_2$ has a melting temperature of $3245^{\circ}C$ and a low density of $6.1\;g/cm^3$, which makes this a candidate for application to ultra-high temperature over $2000^{\circ}C$. Beside these properties, $ZrB_2$ has excellent resistance to thermal shock and oxidation compared with other non-oxide engineering ceramics. This paper reviewed briefly 2 research examples, which are related to densification and properties of $ZrB_2$-based ceramics for ultra-high temperature applications. In the first section, the effect of $B_4C$ addition on the densification and properties of $ZrB_2$-based ceramics is shown. $ZrB_2$-20 vol.% SiC system was selected as a basic composition and $B_4C$ or C was added to this system in some extents. With sintered bodies, densification behavior and hightemperature (up to $1400^{\circ}C$) properties such as bending strength and hardness are examined. In the second section, the effect of the SiC size on the microstructures and physical properties is shown. $ZrB_2$-SiC ceramics are fabricated by using various SiC sources in order to investigate the grain-growth inhibition and the mechanical/thermal properties of $ZrB_2$-SiC.

Sinter/HIP 공정으로 제조한 SiC whisker/$Al_2O_3$ 복합재료의 소결 및 기계적 물성에 관한 연구 (A Study on Sintering and mechanical Properties of Sinter/HIPed SiC Whisker/$Al_2O_3$ Composite)

  • 이채현;김종옥;김종희
    • 자연과학논문집
    • /
    • 제8권1호
    • /
    • pp.53-59
    • /
    • 1995
  • Alumina 세라믹스의 기계적 물성 증진을 위하여 SiC whisker로 강화시키고 소결 조제 및 소결 온도의 영향을 고찰하였다. Whiker의 소결억제 효과로 인하여 고상소결을 촉진하는 MgO나 $TiO_2$를 소결조제로 사용한 경우에서는 치밀한 소결체를 얻을 수 없었으나, 액상을 형성하는 $Y_2O_3$를 2wt% 첨가한 경우에 양호한 소결밀도를 얻을 수 있었다. whisker 첨가에 의한 기지의 기계적 물성의 증진 효과도 함께 얻을 수 있었다. 강화 효과는 보강재인 whiker 자체의 보강 효과와 함께 입성장 억제 효과가 복합적으로 작용한 것으로 판단되었다. 소결체를 HIP 처리한 경우에는 거의 이론 밀도까지 이르는 아주 치밀한 소결체의 제조가 가능하였으며, 기계적 물성은 상압소결 후의 결과에 비하여 향상됨을 확인할 수 있었다.

  • PDF

기계적 활성화된 분말로부터 고주파유도 가열 연소합성에 의한 나노구조 Mg2SiO4-MgAl2O4 복합재료 제조 및 기계적 특성 (Mechanical Properties and Fabrication of Nanostructured Mg2SiO4-MgAl2O4 Composites by High-Frequency Induction Heated Combustion)

  • 손인진;강현수;홍경태;도정만;윤진국
    • 대한금속재료학회지
    • /
    • 제49권8호
    • /
    • pp.614-618
    • /
    • 2011
  • Nanopowders of MgO, $Al_2O_3$ and $SiO_2$ were made by high energy ball milling. The rapid sintering of nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites was investigated by a high-frequency induction heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition of grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. Highly dense nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites were produced with simultaneous application of 80MPa pressure and induced output current of total power capacity (15 kW) within 2min. The sintering behavior, gain size and mechanical properties of $MgAl_2O_4-Mg_2SiO_4$ composites were investigated.

고주파 유도 가열에 의한 급속 나노구조 MgTiO3 화합물 합성 및 소결 (Rapid Synthesis and Sintering of Nanostructured MgTiO3 Compound by High-Frequency Induction Heating)

  • 강현수;도정만;윤진국;박방주;손인진
    • 대한금속재료학회지
    • /
    • 제50권12호
    • /
    • pp.891-896
    • /
    • 2012
  • Nanopowders of MgO and $TiO_2$ were made by high energy ball milling. The rapid synthesis and sintering of the nanostructured $MgTiO_3$ compound was investigated by the high-frequency induction heated sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. A highly dense nanostructured $MgTiO_3$ compound was produced with simultaneous application of 80 MPa pressure and induced current within 2 min. The sintering behavior, gain size and mechanical properties of $MgTiO_3$ compound were investigated.

수도의 장해형 냉해에 관한 연구 (Studies on the Effect of Low Temperature Treatment at Meiotic, Heading and Seedling Stage in Paddy Rice)

  • 이홍석;조형열;임병기;허 훈
    • 한국작물학회지
    • /
    • 제15권
    • /
    • pp.85-97
    • /
    • 1974
  • 수도의 불임을 유발하는 조건을 분명히 하고 불임의 원인을 추구하고저 4품종, 3수준의 처리 온도, 3수준의 처리 기간을 조합한 시험과 내냉성 정도의 품종간 차이를 분명히 하고 생육 각기에 있어서의 품종의 내냉성 정도의 상호 관계를 알고저 우리나라의 중요 19품종을 공시 품종으로 저온 처리를 실시한 시험 결과를 요약하면 다음과 같다. 1. 감수분열기의 저온 처리의 영향은 품종에 따라 다르고 수원 213-1에서는 17.5$^{\circ}C$ㆍ3일간의 처리로도 상당한 불임 현상이 나타났지만 Hayayuki, 농백, 진흥에서는 15$^{\circ}C$ㆍ3일간 또는 17.5$^{\circ}C$.5일간 처리로서 약간의 불임율을 나타내었다. 저온 처리에 의한 임실율의 저하는 품종에 따라 출수지연일수, 이삭의 추출도(수원 213-1, 농백, 진흥) 간장(농백, 수원 213-1), 엽이간장(수원 213-1) 등과 유의적 상관 관계를 보였다. 따라서 수원 213-1 및 농백에서는 이삭의 추출도와 임실율과의 회귀직선식으로부터 불임율을 어느 정도 추정할 수 가 있었다. 냉해 정도가 심한 것은 대체로 약 중의 화분 밀도가 낮고 화분의 크기가 작거나, 약 및 화분의 크기가 불균일하고 불임화분이 많았고 수원 213-1에서는 출수 5일후에 개약하지 않은 것이 없었으나 농백, 진흥, Hayayuki에서는 미개약된 것이 많은 경향이었다. 2. 출수기 처리의 경우에도 대체로 감수분열기 처리에 비하여 불임율이 별로 높지 않았으며 양시기 처리 시의 임실율 간에는 유의적 상관이 인정되었으나 농백과 진흥에 있어서는 15$^{\circ}C$.5일간의 처리로도 임실율에 별로 영향하지 않았다. Hayayuki 및 수원 213-1에서는 처리에 의한 미개약 현상이 있었으나 농백 및 진흥에서는 미개약 현상도 많이 볼 수 있었다. 3. 감수분열기의 저온 처리에 의하여 임실율의 저하로 나타난 내냉성 정도에는 품종간에 현저한 차이가 있고 재건, 진흥 등은 임실율이 별로 떨어지지 않았으나 밀성, 수원 8002, Satominoli, 수원 231-1 등은 임실율이 심히 떨어 졌고 출수 지연도 컸다. 임실율이 떨어지는 품종들은 일반적으로 약내 화분 밀도가 낮거나 약의 형태가 비정상인 것이 많거나, 화분의 크기가 적거나, 불임 화분이 많은 경향이었다. 4. 출수기 처리 시에도 불일율의 품종 간 차이는 현저하여 농백, 진흥, 재건, 팔달, Akibare, 밀성, 팔굉 등은 거의 처리의 영향이 없었고 농림나 001, 수성, Hayayuki, 수원 213-1, 수원 210 등은 임실율이 상당히 낮았다. 일반적으로 감수분열기 처리에 비하면 임실율은 약간 높은 편이지만 Hayayuki, 수성, 농림나 001 등은 출수기 처리에서 오히려 임실율이 낮았다. 또 처리 종료 후에는 품종에 따라 미개약 영화가 많은 품종과 개화 수분이 모두 이루어지지만 불임이 되는 품종도 볼 수 있었다. 5. 냉해의 유묘 검정 결과에서 관찰조사와 처리에 의한 생육 억제 정도와는 반드시 일치하지 않았으나 종합적으로 볼 때 제 002, 팔금, 수성 등은 냉해에 강하고 수원 213-1, 재건, 팔달, Shirogane, 팔굉, 만경 등은 약하였다. 6. 감수분열기 및 출수기 처리 시의 일심율과 유묘 시의 냉해 정도 및 생육 억제 정도 등의 상호 관계를 살펴본 즉 대체로 유의적 상관을 보이지 않았다.

  • PDF

치아회분(齒牙灰粉)과 도재복합(陶材複合) 매식체(埋植體)의 물리적(物理的) 성질(性質) 및 세포배양(細胞培養)에 의(依)한 조직친화성(組織親和性)에 관(關)한 연구(硏究) (A Study on the Physical Properties and Cytotoxicity of Tooth Ash and Dental Procelain)

  • 호기영
    • 대한치과보철학회지
    • /
    • 제22권1호
    • /
    • pp.51-68
    • /
    • 1984
  • The purpose of this study is primarily to test the use value of tooth ash as an alternative material of the synthetic hydroxyapatite. For this purpose the author performed the experimental study to investigate the phsyical properties of sintered tooth ash and its histocompatibility in vitro. The tooth ash was made by incinerating procedure at $650^{\circ}C,\;750^{\circ}C,\;850^{\circ}C,\;950^{\circ}C\;and\;1050^{\circ}C$ respectively. The composition of tooth ash was analyzed and X-ray diffraction was done. The experimental specimens were molded to the cylinderical form 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$, which were divided into two groups; the one is sintered tooth ash at $1100^{\circ}C$ and the other is fired mixture of tooth ash and dental porcelain mixed to the weight ratio of 4:6, 5:5, 6:4 and 7:3. The physical propoerties of the sintered specimens were examined and their microstructure was observed under the Scanning Electron Microscope. The results obtained were as followings: 1. The difference of the tooth ash composition depending on incinerating temperature was of no significance, but the $CO_2$ disappeared from $950^{\circ}C$. 2. X-ray diffraction showed the tooth ash was mainly composed of hydroxyapatite and a small amount of - white lockite. But phase transformation was not disclosed. 3. The microstructure of the sintered specimens of the ashed tooth powder was of no difference in the structure and grain size accompanying the ashed temperature, but sintering ability seemed to be the best in the specimen incinerated at $950^{\circ}C$. 4. There was good wettability in the mixed sintered specimens of the ashed tooth powder and the porcelain powder. 5. The compressive strength of the sintered specimens of the tooth ash incinerated at $950^{\circ}C$ was the highest with $589.75kg/cm^2$ and the porosity and the absorption were the lowest as well. 6. The mixed sintered specimens of the tooth ash and porcelain powder was good in the physical properties in the case of mixed weight ratio of 6:4. 7. The animal fibroblast cultures with porcelain showed increase in the cell number, whereas the tooth ash showed a small degree of growth inhibition. But the difference of cell multiplication efficiency between control cultures and test cultures with tooth ash was not observed.

  • PDF