• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1011-1020
• /
• 2017

This study was conducted to investigate the material properties of stainless steel 316L specimens of untreated and UNSM treated material, hydrogen attacked material(100 bar, $300^{\circ}C$ at 120 h) and UNSM treated hydrogen attacked material at room temperature. Results demonstrated that the hydrogen attacked materials showed a tendency toward a slightly decreased fatigue strength, while the hydrogen embrittlement effect was smaller than the S-N curve of conventional untreated material. As compared to untreated material, the fatigue limit of the UNSM treated material increased by 43.8%, while it was 57.1％ higher in the UNSM treated hydrogen attacked material than in untreated hydrogen attacked material. The plastic deformation layer was ${\sim}152{\mu}m$ thick, as confirmed by maps showing the level of local plastic deformation affected by the UNSM treatment in three ways: an image quality map, inverse pole figure map, and kernel average misorientation map captured via electron back scatter diffraction. Owing to hydrogen embrittlement, about 90％ of surface cracks were smaller than the average grain size of $35{\mu}m$.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.13-18
• /
• 1997

The effects of the various raw material composition and sintered temperature on the physical properties of Ni-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from microscope was from 6 ${\mu}{\textrm}{m}$ to 16 ${\mu}{\textrm}{m}$. As the sintering temperature was increased from 1030 $^{\circ}C$ to 1070 $^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen. Their values were about 0.20 Oe and 220 $^{\circ}C$. The frequency of specimen will used in the range from 400 kHz to 20 MHz. The basic composition of $Ni_{0.14}Zn_{0.64}Cu_{0.22}Fe_2O_4$ (specimen B) sintered at 1050 $^{\circ}C$ shows the best results at magnetic induction($B_r & B_m$).

• Korean Journal of Weed Science
• /
• v.9 no.2
• /
• pp.141-148
• /
• 1989

Echinochloa species collected from 13 places of Korea appeared to be morphologically very different. They were classified by Yabuno's seed morphology method into two species such as Echinochloa oryzicola and Echinochloa crus-galli which have two varieties such E. crus-galli var, cuss-galli and var, praticola. Among them, E. oryzicola was morphologically similar to Oryza sativa, but it had small leaf length with straight from, no awn, late heading and little interspecific variance. As compared with E. oryzicola, E. eras-galli var. crus-galli, and var, praticola showed a great variance exerting so difficulty in classifing them morphologically, particularly a great variance in leaf length, tiller number and grain size. E. oryzicola species showed the more sensitive response to butachor and thiobencarb herbicides than E. eras-galli var. praticola and var. eras-galli. However, E. eras-galli var. praticola was themore sensitive one to pretilachloa herbicide than such as E. oryzicola and E. eras-galli var. eras-galli, indicating that Echinochloa species might have a selective response to the annual herbicides tested.

• 한국해양학회지
• /
• v.22 no.3
• /
• pp.143-152
• /
• 1987

The digital data were obtained using Kennedy 9000 magnetic tape deck which was connected to the SMS960 side scan sonar during the field operations. The data of three consecutive survey tracks near Seongsan-po, Cheju were used for the development of this study. The softwares were mainly written in Fortran-77 using VAX 11/780 MINI-COMPUTER (CPU Memory; 4MB). The established mapping system consists of the pretreatment and the digital processing of seafloor image data. The pretreatment was necessary because the raw digital data format of the field magnetic tapes was not compatible to the VAX system. Therefore the raw data were read by the personal computer using the Assembler language and the data format was converted to IBM compatible, and next data were communicated to the VAX system. The digital processing includes geometrical correction for slant range, statistical analysis and cartography of the seafloor image. The sound speed in the water column was assumed 1,500 m/sec for the slant range correction and the moving average method was used for the signal trace smoothing. Histograms and cumulative curves were established for the statistical analysis, that was purposed to classify the backscattering strength from the sea-bottom. The seafloor image was displayed on the color screen of the TEKTRONIX 4113B terminal. According to the brief interpretation of the result image map, rocky and sedimentary bottoms were very well discriminated. Also it was shown that the backscattered acoustic pressurecorrelateswith the grain size and sorting of surface sediments.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.107-116
• /
• 1999

To study the characters of surface sediment and to describe the seasonal depositional environment as a result of sedimentation process off Byun-San Peninsula, a total 61 samples of surface sediment (32 samples in summer; 29 samples in winter) were collected and analysed. A digitized depth data from sea chart and echosounding profiles along five trans-sections were helpful for understanding the morphological factors. The types classified by the characters of surface sediment are type I (sand, S), type II (silty sand, zS), and type ill (sandy silt, sZ). Mean grain size varies from 2.11 to 7.81 ${\Phi}$. The positive-skewness shows the typical tide-dominated environment. The sediment type of the northwestern stations is medium sand and the sorting value is 0.5~1.4 ${\Phi}$ of well/moderately sorted. Meanwhile, other stations are composed of muddy sands and sandy muds transported from rivers and offshore. These sediment types toward inshore change gradually from silty sand to sandy silt. According to the C/M diagram, there are three major transport modes of sediment: bed load (Mode A), graded suspension (Mode B), and suspension (Mode C), correlating with north-eastern sandy area, middle part of silty-sand area, and southern sandy-silt area, respectively. The result of Principal Component Analysis shows also similar pattern of sediment types. In result, sediment texture of type III tends to be finer and more poorly-sorted than that of type II and sediment facies are correlateed with sedimentation process.

• Journal of the Korean Vacuum Society
• /
• v.22 no.2
• /
• pp.79-85
• /
• 2013

Rare earth ions, either $Eu^{3+}$ or $Dy^{3+}$-doped $CaMoO_4$ phosphors were synthesized by using the solid-state reaction method. The crystalline structure of all the phosphor powders, irrespective of the type and concentration of activator ions, was found to be a tetragonal system with the main diffraction peak at (112) plane. For $Eu^{3+}$-doped $CaMoO_4$ phosphors, the grain particles showed an increasing tendency and the pebble-like patterns with a very homogeneous size distribution in the range of 0.01~0.10 mol of $Eu^{3+}$ ions concentration, and the excitation spectra were composed of a broad band centered at 311 nm and weak multiline peaked in the range of 360~470 nm. The dominant emission spectrum was the strong red emission centered at 618 nm due to the $^5D_0{\rightarrow}^7F_2$ transition of $Eu^{3+}$ ions. For $Dy^{3+}$-doped $CaMoO_4$ powders, excitation spectra showed a charge transfer band centered at 303 nm and relatively weak bands resulting from the transitions of $Dy^{3+}$ ions and the main yellow emission spectrum was observed at 578 nm, which was assigned to the $^4F_{9/2}{\rightarrow}^7H_{13/2}$ transition of $Dy^{3+}$ ions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1716-1720
• /
• 2007

연안 해역에서의 표사는 하천에서의 유사가 주요한 공급원이므로 산지-하천-해안을 통합한 유사 및 표사에 관한 관리가 필요하며, 해안수리 및 환경적인 측면에서 강성 연안구조물의 건설을 통하지 않고 연안에서의 침식을 억제해야하는 방지대책의 수립 요구가 증대하고 있는 실정이다. 즉 연안에서의 침식, 퇴적관계는 토사공급원의 장기적인 확보여부가 중요하며 하천에서 해안역으로 공급되는 유사량을 예측하고 또한 이들이 어떻게 효과적으로 연안 해역으로 이송되어 가는가를 파악하는 것은 연안표사문제를 이해하는데 매우 중요한 요소이다. 이를 위해서는 무엇보다도 하천에서 연안 해역으로의 유사량을 파악하는 것이 중요하며 그리고 하천 유사량이 하구에 사주를 형성하고 어떤 형태를 거쳐 연안표사로 이동하는가 하는 특성을 파악할 필요가 있다. 울산광역시 울주군 온산읍에 위치한 회야강의 하구폐색은 1990년대 중반부터 연구의 관심이 되어오고 있으며, 1986년 회야강 상류 회야댐 건설 이후 하구폐색이 가속화됨에 따라 매년 회야강 하구에서의 준설이 필요한 실정이다. 특히 회야강 하구부에서는 파랑류, 취송류와 하천류 뿐만 아니라 해류나 조류 등에 의한 흐름과 지형특성등 복합적으로 발생하는 하구현상에 의해 하구에서의 사주 발달이 상대적으로 강하여 하구폐색이 강하게 나타나고 있다. 이의 대책으로 최근 회야강 하구부에 도류제가 건설되었으며 이에 따른 장기적인 하구부 하상변동특성과 토사이동의 특성 파악이 요구되고 있는 실정이다. 본 연구에서는 이 같은 관점에서 회야강 하구부의 도류제 설치에 따른 하구에서의 지형변동과 유송토사량의 특성을 파악하기 위해 하천 상류부에서는 동적 평형상태의 유사량을 가정하고 하상재료 및 유사는 혼합입경으로 하여 하상고 및 하상교환층 중의 입도조성의 시간변화를 구하여 1차원적인 하상변동과 토사이동 특성을 해석하였다.했을 때, 대표입경을 통해 얻은 조도계수가 보정 조도계수보다 다소 작은 것으로 해석되었다.하고자 한다.해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.166-176
• /
• 1994

Ni base superalloys are composed of solid sohltion hardening elements(Co, Cr. Mo. W and so on) and $\gamma '$ precipitation hardening elements(A1, Ti, Nb, Ta and so on). To Improve the mechanical properties and oxidation resistanre of superalloys, rare earth elements(%r, Hf, Y and so on) are added to the inner substrate, or are used as coating materials. Their pffects on the growth rate and adhes~on of oxide are changed according to the kinds of oxides such as $AI_2O_3$ and $Cr_2O_3$. The effect of yttrium on the oxidation rate, grain size of oxide, internal structure, and crack resistance was investigated for two kinds of Ni-base superalloys. One in AF'115 superalloy containing Hf and the other is MA6000 superalloy containing $Y_2O_3$. They werr owid~zed at high temperature after yttrium surface modification using ion coater. Yttrium coating on the AF115 and MA6000 superalloys results in a marked change in the growth of the inner oxide. For AF115 superalloy, the degree of gram boundary segregation of $Cr_2O_3$, and prefer en^ tial oxidation of Hf are decreased, and the shape of inner oxidation layer was changed from triangle to plate type. For MA6000 superalloy, $Cr_2O_3$ oxide scale was transformed as outer oxidation layer of CrZOI and inner oxidation layer of $Cr_2O_3$.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.279-289
• /
• 1997

Dark to pale green-colored, Cr-bearing sericites from hydrothermal alteration zone of the Narim gold deposit were investigated mineralogically and geochemically. The alteration zone is composed mineralogically of quartz, carbonate minerals and green sericite with minor amounts of chlorite, barite and sulfide minerals (pyrite, sphalerite, galena). The zone is enriched in As (967 to 1520 ppm), Cu (31 to 289 ppm), Ni (1027 to 1205 ppm), Pb (0.20 to 1.24 wt.%) and Zn (1.03 to 1.07 wt. %) compared with fresh rocks such as granitic gneiss, porphyritic biotite granite and basic dyke. The Cr, probably the chromophore element, is highly enriched in the alteration zone (1140 to 1500 ppm), host granitic gneiss (1200 ppm) and porphyritic biotite granite (1200 ppm). Occurrence and grain size of sericite are diverse, but most of the Cr-bearing sericites (150 to $200{\mu}m$ long and 20 to $30{\mu}m$ wide) occur along the boundaries between ore veins and host rocks (especially basic dyke and granitic gneiss). X-ray diffraction data of the sericite show its monoclinic form with unit-cell parameters of $a=5.202{\AA}$, $b=8.994{\AA}$, $c=20.103{\AA}$, ${\beta}=95.746^{\circ}$ and $V=935.83{\AA}^3$, which are similar with the normal 2M1-type muscovite. Representative chemical formula of the sericite is ($K_{1.54}Ca_{0.03}Na_{0.01}$)($Al_{3.42}Mg_{0.38}Cr_{0.14}Fe_{0.06}V_{0.02}$)($Si_{6.69}Al_{1.31}$)$O_{20}(OH)_4$. The Cr content increases with decrease of the octahedral Al content, and ranges from 0.36 to 2.58 wt.%. DTA and TG curves of the sericite show endothermic peaks at $342^{\circ}$ to $510^{\circ}$, $716^{\circ}$ to $853^{\circ}$ and $1021^{\circ}C$, which are due to the expulsion of hydroxyl group. The total weight loss by heating is measured to be about 8.8 wt. %, especially at $730^{\circ}C$. Infrared absorption experiments of the sericite show broad absorption band due to the O-H bond stretching vibration near the $3625cm^{-1}$, coupled with the 825 and $750cm^{-1}$ doublet. The vibration bands related with the H-O-Al and Si-O-Al bonds occur at $1030cm^{-1}$ and 500 to $700cm^{-1}$, respectively. Based on paragonite content of the sericite, the formation temperature of the Narim gold deposit is calculated to be $220{\pm}10^{\circ}C$.

• Korean Journal of Environmental Biology
• /
• v.36 no.2
• /
• pp.107-116
• /
• 2018

In this study, the distribution of sedimentary environment and benthic macro-fauna in habitats and non-habitats of Zostera marina were investigated. The purpose of this study was to obtain basic data about the sedimentary environment and benthic macro-fauna in the habitats and non-habitats of Z. marina. Sand was dominant within habitat environments, whereas the non-habitats were predominantly composed of silt. As a result, the habitats of Z. marina have a different grain size and organic matter content compared to the non-habitats. These differences in the sedimentary environment were expected to influence the species composition of benthic animals. Benthic communities in the habitats of Z. marina showed a higher density and a greater number of species than in the non-habitats. As a result of an ecological index evaluation, the species diversity index (H') was $3.44{\pm}0.10$ for the habitat; the non-habitat was analyzed as $2.34{\pm}0.35$. It was also found that the stability of community in the habitats was higher than that in the non-habitats. The cluster analysis also clearly showed that habitats and non-habitats of Z. marina have distinct characteristics.