• 타이어
• /
• 통권89호
• /
• pp.30-35
• /
• 1980

Belted Bias 타이어의 타이어 품질등급제 (UTQGS: Uniform Tire Quality Grading Standard)가 79년 10월1일 발효되었다. 다음 일람표는 미국운수성(DOT) 국유 High Way 교통안전국(NHTSA)에 79년 10월 3일까지 등록된 각 타이어 메이커 및 자가 Brand 품(Private Brand)업자로부터 제출된 등급표시이다. Bias타이어의 등급표시는 지난 호(5~6월)에 게재한 바 있으며, 앞으로 Radial 타이어의 UTQGS에 의한 등급표시도 곧 입수되는대로 게재할 예정이오니 참고하여 주시기 바랍니다. 그리고 Grades 표시내용에 대해서는 지난 호에 주석해 놓았으므로 참조바랍니다.<편집자주>

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.352-355
• /
• 2004

Crushed sand is made by crushing the rocks artificially. With a wide shortage of natural river sand all over the region in Korea, demand for crushed sand are becoming increased. However, Informations as to crushed sand are insufficient. In this paper, the actual conditions of crushed sand related to producing and quality variation are investigated. 29 manufacturing company of crushed sand are reviewed. According to results, density of most crushed sand tested exceeded 2.5g/cm3, and absorption ratio meet the requirement of KS except one sample. For grain properties, passing amount of 0.08mm sieve satisfied the requirement of KS except one sample. Grain distribution of most crushed sand is estimated $54.26\%$. But 6 crushed sand sample did not meet the requirement of KS. Fineness modulus and grading are varied from manufacturing region. 18 samples of crushed sand among 29 samples deviated the minimum level of standard grading range by KS. Therefore, improvement of grain properties of crushed sand is urgently needed to manufacture better crushed sand.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1001-1008
• /
• 2010

The architectural, facility makes the housing environment more pleasant, while too much noise coming from machinery room is detrimental to the workers physically and mentally. Therefore, more sound insulation and sound proof policies are increasingly required. However, as the annoyance caused by facility noise is influenced by various human listening characteristics as well as physical characteristics such as sound pressure level, it requires subjective evaluation characteristics through acoustic-psychological approach. For this purpose, the facility noise in the machinery room was actually measured and analyzed in the field to understand physical characteristics, and the correlation between physical evaluation value and psychological response value through listening test. Further, this study aims at presenting the data to set the standards of 'Just noticeable difference' of the facility noise together with reasonable evaluation with psychological reaction, through the grading of facility noise using trend formula. In the result, 13 stages of physical properties were forecasted for each evaluation method, together with 'Just noticeable difference' using the grading of architectural facility noise.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.569-577
• /
• 2000

The position of tobacco leaves is affluence to the quality. To evaluate its quality, sample leaves was collected according to the position of attachment. In Korea, the position was divided into four classes such as high, middle, low and inside positioned leaves. Until now, the grade of standard sample was determined by human expert from korea ginseng and tobacco company. Many research were done by the chemical and spectrum analysis using NIR and computer vision. The grade of tobacco leaves mainly classified into 5 grades according to the attached position and its chemical composition. In high and low positioned leaves shows a low level grade under grade 3. Generally, inside and medium positioned leaf has a high level grade. This is the basic research to develop a real time tobacco leaves grading system combined with portable NIR spectrum analysis system. However, this research just deals with position recognition and grading using the color machine vision. The RGB color information was converted to HSI image format and the sample was all investigated using the bundle of tobacco leaves. Quality grade and position recognition was performed through well known general error back propagation neural network. Finally, the relationship about attached leaf position and its grade was analyzed.

• 한국결정성장학회지
• /
• 제23권4호
• /
• pp.173-179
• /
• 2013

다이아몬드는 원석의 형태가 불규칙하고 견고하더라도 보석으로 쉽게 가공될 수 있으며, 등급 평가에 영향력을 나타내는 테이블, 크라운, 퍼빌리언, 거들면을 정밀하게 측정하였다. Round Brilliant Cut Diamond의 표준 연마에 적합한 규격을 조사하였고, 통계적(95 %) 신뢰 구간으로 표준편차, 평균, 허용 오차를 검토하였다. 측정된 크기, 각도, 깊이, 두께의 변수들이 나타내는 분포에 따라, 커팅 등급의 빈도 분석과 프로포션을 비교하였다. 각 변수간의 상관관계와 프로포션에 나타난 영향력의 근거는 LSM(Least Square Method)을 적용한 회귀 분석으로 결정하였다. 본 논문에서, 다이아몬드의 테이블 크기와 퍼빌리언 깊이 퍼센트가 등급 결정에 많은 영향을 미치고, 특히, 퍼빌리언 깊이는 프로포션과 관련하는 주요 원인으로 광학 현상에도 작용함을 알 수 있었다.

• 농업과학연구
• /
• 제37권1호
• /
• pp.7-12
• /
• 2010

A significant difference in table grape quality was found between harvest seasons, producers and cultivars. In general, 'Kyoho' grapes showed much greater difference in fruit quality than 'Campbell Early'. The ratio of 'Campbell Early' grapes with poor quality (below quality standard within grades), was higher in fruit harvested early in the season, mainly because of immature fruit harvest. In 'Kyoho', poor quality of fruit seemed to be derived from the deviation of cultural practice between producers. Major factors responsible for poor quality in both cultivars includes harvest of unripe cluster, poor sorting and grading, berry abscission, and poor coloration. It is recommended to introduce a new quality standards considering the market condition in 'Kyoho' or a fresh-cut technology of grape berries for niche market.

• 한국터널지하공간학회 논문집
• /
• 제3권4호
• /
• pp.35-55
• /
• 2001

최근 터널 구조물이 점차 노후화됨에 따라 터널의 안전성을 평가하기 위한 점검 및 진단이 많이 수행되고 있다. 그러나 터널구조물의 상태 및 안전성 평가에 대한 명확한 기준이 없어 조사자의 주관적인 판단에 의존할 수 밖에 없는 실정으로 이에 대한 체계적인 기준정립이 요구되고 있다. 또한 기존방법은 터널라이닝에 대한 평가에 많은 비중을 주고 있어 지반구조물로서의 터널특성을 제대로 반영하지 못하고 있으며, 상태평가요소과 터널등급산정과정이 체계적이지 못하여 이에 대한 보완이 필요하다 할 수 있다. 따라서 본 연구에서는 터널 상태 및 안전성 평가방법의 문제점을 개선하기 위한 새로운 터널구조물상태평가기준을 제시하였다. 본 기준은 국내외의 터널기준을 분석하여 상태평가요소를 선정하고 이를 점수화하였으며, 대표등급산정방법을 정량화하므로서 터널상태를 객관적으로 평가할 수 있도록 하였다. 본 기준과 방법은 터널구조물에 대한 상태평가에 객관성과 신뢰성을 확보하여 보다 효율적인 안전점검 및 진단업무에 활용될 수 있다.

• 한국산업융합학회 논문집
• /
• 제27권5호
• /
• pp.1237-1242
• /
• 2024

There are a variety of evaluation methods used to evaluate and provide feedback to students, recognize shortcomings, and establish future plans. The purpose of the academic achievement evaluation is to check whether the student understands the content taught, identify areas that the student is unfamiliar with or misunderstand, and then provide supplementary study to prevent learning deficits. Multiple choice has been the evaluation system in Korea since the early 1970s, influenced by Tyler's goal-centered evaluation model that evaluates achievement of educational goals and Bloom's educational goal classification system. The most important item in education is the evaluation of whether you have properly understood the lesson and how deeply you know it. Therefore, in this study, in order to minimize cases where test takers stochastically answer the correct answer in a multiple-choice evaluation, the change in the standard deviation of grades was analyzed by applying a grading method that assigns negative points to incorrect answers. As a result of the study, it was found that the average score of the incorrect response evaluation was 1 to 4 points lower, and the standard deviation was wide. This showed that the test taker's discrimination ability was high in the wrong answer appraisal type.

• 한국의류학회지
• /
• 제26권6호
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.329-336
• /
• 2016

본 연구에서는 폐기종에 대해 고해상도 CT와 비교한 저선량 CT 의 유용성에 대해 평가하였다. 고해상도 CT와 저선량 CT 노출조건에서 선량과 영상 잡음을 3회 반복 측정하였다. 비슷한 노출조건에서 획득한 146명의 고해상도 CT와 저선량 CT 영상에 대해 2명의 흉부영상의학과전문의 합의 판독결과에서 폐기종 소견 만을 본 연구에 사용하였다. SPSS ver. 19.0 프로그램 사용하여 고해상도 CT와 저선량 CT 간에 폐기종에 대한 진단 차이는 McNemar's tests, 일치도는 unweighted kappa tests, 선량과 잡음 차이는 Mann-Whitney U-test 로 분석하였다. 선량은 고해상도 CT가 저선량 CT 보다 높았지만(1.95 mGy vs. 0.35 mGy, p=0.008), 잡음은 낮았다(40.1 HU vs. 99.6 HU, p=0.021). 폐기종 진단에 대해서는 두 영상 간에 높은 일치도를 보였다(k-value=0.88). 폐기종 점수는 두 영상 간에 통계적인 유의한 차이를 보이지 않았고, 높은 상관성을 보였다(r=0.599, p < 0.001). 선량과 잡음을 고려했을 때, 저선량 CT는 폐기종 진단에 표준 진단 방법 인 고해상도 CT를 대신하여 사용할 수 있을 것으로 사료된다.