• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.832-837
• /
• 2006

ATC facility manipulates ground-on-board information, which transmits speed limit, varying as wayside environments - safety facility, track gradient, inclination, bridge and tunnel and other factors, installed for safe operation of trains on wayside. Efficientiation and automatification of operation and maintenance is being realized, by measuring if there are any erroneous information, using a measuring car. In this paper, we study in priority the methods for measuring accurately distinctive properties of internal malfunctions of track circuits, the performance decrease of condensers, and the unbalance of return cables, which are actually required for functionality improvement of high-speed line signal measure facilities, by measuring the unbalance of return current given because of damaged factors of external track circuits.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.165-172
• /
• 2002

We presents an hazard zonation mapping technique in karst terrain and its assessment. From the detailed engineering geological mapping. Controlling factors of sink hole and limestone cave formation were discussed and 4 main hazard factors affecting hazard potential are identified as follows: prerequisite hazard factor(distributions of pre-existing sink holes and cavities), geomorphological hazard factors(slope gradient, vegetation, and drainage pattern etc.) geological hazard factors(lithology, fracture patterns and geological structures etc.) and hydraulic conditions(hydraulic head, annual fluctuation of ground water table and composition of g/w water). From the construction of hazard zonation map along the Jecheon-Maepo area, and vertical cross-sectional hazard zonations specific tunnel site we suggest hazard zonation rating systems.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2019년도 하계 학술발표초록집
• /
• pp.228-229
• /
• 2019

• 한국가시화정보학회지
• /
• 제21권2호
• /
• pp.91-101
• /
• 2023

In this study, we investigated how the performance of a Venturi changes when a hemispherical bump is applied to the divergent part of the Venturi tube and what causes the performance difference. The Venturi-tunnel experiment was conducted in the Reynolds number range of 0.2 × 10⁵ - 1.2 × 10⁵ and cavitation number range of 0.9 - 10. The bump was found to reduce the pressure loss coefficient and increase the discharge coefficient by shortening the cavitation length. The decrease in the cavitation length by the bump was explained by the strengthening of the re-entrant jet. The wake generated from the hemispherical bump seems to increase the adverse pressure gradient on the Venturi surface, thereby strengthening the re-entrant jet.

• 한국약용작물학회지
• /
• 제27권5호
• /
• pp.322-329
• /
• 2019

Background: Studies have suggested that the northern provinces of Gangwon-do are good sites for licorice (Glycyrrhiza uralensis Fisch.) cultivation in Korea, as they have similar temperatures to its original locations in northern China. However, poor growth and freezing injury are often reported in Korea. Therefore, it is necessary to reassess the domestic cultivation site of licorice. Methods and Results: To determine the optimum temperature for cultivating licorice, the growth, yield, and pharmacological characteristics of G. uralensis were assessed in a temperature gradient tunnel at Eumseong, Chungcheongbuk-do, Korea in 2017. Plant height increased until the temperature rose to $5.9^{\circ}C$ above the local external temperature. Yield (㎏/10a) increased by 46.9% when the growing temperature was $1.5^{\circ}C$ to $3.0^{\circ}C$ (T2) above the external temperature and by 72.6% when the growing temperature was $3.0^{\circ}C-4.5^{\circ}C$ (T3) above the external temperature. However, a difference of $4.5^{\circ}C-5.9^{\circ}C$ (T4) above the external temperature, decreased the yield by 9.8% compared to that at T2. The glycyrrhizin content of G. uralensis roots in each temperature band was 0.72%, 0.53%, 0.91%, and 0.84% (T1, T2, T3, T4), these differences appear to result form individual plant variation rather than growth temperature. Conclusions: Based on the results of this study, we estimate that the temperature-based optimum cultivation site for G. uralensis in Korea is the south central region, rather than the northern province of Gangwon-do. Improvement in growth and yield maybe observed if the plantations in the central Jecheon (Chungcheongbuk-do, Korea) are expanded into the south central region.

• 한국터널지하공간학회 논문집
• /
• 제24권2호
• /
• pp.217-230
• /
• 2022

쉴드TBM (Tunnel Boring Machine) 터널 시공에 있어 막장압 관리는 막장면 붕괴, 지반침하 등을 방지하여 막장 안정성을 유지하는 데 중요한 역할을 담당한다. 특히, 챔버 내부의 굴착토로 막장압을 조절하는 토압식 쉴드TBM의 경우, 이수식 쉴드TBM에 비해 막장압의 관리가 어렵다. 본 연구에서는 국내 토압식 쉴드TBM 터널 시공 현장의 지반조건 및 굴진특성 데이터를 분석하여, 토압식 쉴드TBM 터널의 세그먼트 링별 막장압 예측모델을 제시하였다. 예측모델의 입력특성으로 7가지를 선정하였으며, 912개의 학습 데이터 세트(Training data set)와 228개의 시험 데이터 세트(Test data set)를 확보하였다. 최적의 토압식 쉴드TBM 막장압 예측모델 선정을 위하여 KNN (K-Nearest Neighbors), SVM (Support Vector Machine), RF (Random Forest), XGB (eXtreme Gradient Boosting) 모델의 하이퍼파라미터(Hyperparameter)를 최적화하여 예측성능을 비교한 결과, RF 모델이 7.35 kPa의 평균 제곱근 오차(Root Mean Square Error, RMSE)로 가장 우수한 성능을 나타냈다. 추가적으로, RF 모델의 특성 중요도(Feature importance) 분석을 수행한 결과, 입력특성 중 수압의 영향도가 0.38로 가장 높았으며, 전반적으로 지반조건이 굴진특성보다 높은 중요도를 보여주었다.

• 터널과지하공간
• /
• 제20권1호
• /
• pp.15-27
• /
• 2010

국토의 약 70%가 산악지형인 우리나라의 지형적 특성상 각종 건설공사에 따른 대절토 사면의 형성으로 인해 낙석의 위험성이 급증하고 있다. 특히 해마다 반복되는 집중호우 시의 사면 붕괴는 대규모 낙석을 동반하면서 막대한 인적, 물적 피해를 초래하고 있다. 이러한 문제점들을 해결하기 위해 많은 현장조사연구 및 기초연구들이 수행되고 있으나 이들 연구의 대부분은 낙석이 발생할 경우의 보강 및 낙석 위험도 분석 등에 국한되고 있어, 근본적인 낙석의 거동에 관한 검토 및 분석은 미진한 실정이다. 따라서 본 연구에서는 수치해석적 기법을 이용하여 사면의 외적 요소에 따른 낙석의 거동 특성을 규명하였으며, 이를 위해 개별요소법의 하나인 PFC2D가 이용되었다. 사면의 외적 요소로 사면의 표면상태, 구배, 소단 개수, 소단 구배 및 낙석의 크기에 대한 소단의 너비의 비 등이 검토되었으며, 이들 요소에 대한 다양한 변화를 통해 낙석의 거동 메커니즘이 수치해석적으로 분석되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1278-1289
• /
• 2008

Currently in increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method (NATM). Successful design, construction and maintenance of NATM tunnel in urban area demands prediction, control and monitoring of surface settlement, gradient and ground displacement with high accuracy. Use of measured displacement for parameter determination has been researched over the years, and one geotechnical engineering principle has been formed as back analysis. In this paper, back analysis of a ground deformational behavior involving nonlinear behavior is discussed. It is of primary importance to make reliable prediction of deformational behavior for shallow tunnels in soft ground. However, predictions made often prove to be incorrect due to complexity of constitutive law and other relevant factors. Back analysis therefore becomes more important, for it may be used to interpret measured displacement to derive nonlinear material characteristics. The paper shows some example in which a deformational mechanism is studied in the light of inhomogeneous distrubution of Young's module, from which a logic is derived to identify two different types of nonlinear constitutive relationships.

• 한국지반공학회논문집
• /
• 제28권2호
• /
• pp.23-31
• /
• 2012

본 연구에서는 사질토 지반에 설치한 원형수직터널에서 아칭효과를 고려한 토압의 거동 특성을 분석하기 위해 실제의 응력상태를 재현할 수 있는 원심모형실험(centrifuge model test)을 수행하였다. 이를 위해 직경 6.0m, 높이 15.0m의 원형수직터널을 대상으로 축소모형 실험체를 제작하였으며, 중력장 75G를 가속하여 2회 반복실험을 수행하였다. 더불어, 지반굴착에 따른 토압의 거동특성과 크기를 분석하기 위하여 모형 수직터널 벽체를 2단으로 분리하여 굴착효과를 모사하였으며, 그 결과를 선행연구에서 제안한 이론토압식과 비교하였다. 실험결과, 원형수직터널에 작용하는 토압은 기존의 2차원(Ko) 토압에 비해 약 70% 가까이 전토압이 저감되는 효과가 관찰되었으며, 이는 3차원 아칭효과에 의해 토압이 경감된 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.466-475
• /
• 2003

The gun-type gas burner adopted in this study is generally composed of eight slits and swirl vanes. Thus, this paper is studied to investigate the effect of slits and swirl vanes on the turbulent flow fields in the horizontal plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rate 450 $\ell$/min in the test section of subsonic wind tunnel. The axial mean velocity component in the case of burner model with only swirl vanes shows the characteristic that spreads more remarkably toward the radial direction than axial one, it does, however, directly opposite tendency in the case of burner model with only slits. Consequently. both slits and swirl vanes composing of gun-type gas burner play an important role in decrease of the speed near slits and increase of the flow speed in the central part of a burner because the biggest speed spurted from slits encircles rotational flow by swirl vanes and it drives main flow toward the axial direction. Moreover, the turbulent intensities and turbulent kinetic energy of gun-type gas burner are distributed with a fairly bigger size within X/R<0.6410 than burner models which have only slits or swirl vanes because the rotational flow by swirl vanes and the fast jet flow by slits increase flow mixing, diffusion, and mean velocity gradient effectively.