• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.279-285
• /
• 2013

In this paper, we propose a novel speech enhancement method to improve the performance of the conventional global soft decision which is based on the spectral gradient method applied to the ratio of a priori speech absence and presence probability value (q). Conventional global soft decision scheme used a fixed value of q in accordance with the hypothesis assumed, but the proposed algorithm is a technique for improving the speech absence probability which is applied adaptively variable value of q according to the speech presence or absence in the previous two frames and the conditions of the spectral gradient value. Experimental results show that the proposed improved global soft decision method based on the spectral gradient method yields better results compared to the conventional global soft decision technique based on the performance criteria of the ITU-T P. 862 PESQ (Perceptual Evaluation of Speech Quality).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.30-36
• /
• 2010

Due to the scaling of process parameters, the density on chips has been increasing. This trend increases not only the temperature on chips but also the gradient of the temperature depending on distances. In this paper, we propose the balanced skew tree generation technique for minimizing the clock skew that is affected by the temperature gradients on chips. We calculate the interconnect delay using Elmore delay equation, and find out the optimal balanced clock tree by modifying the clock trees that are generated through the DME(Deferred Merge Embedding) algorithm. We have implemented the proposed technique using C language for the performance evaluation. The experimental results show that the clock insertion point generated by the temperature gradient can be lowered below 54% and we confirm that the skew is remarkably decreased after applying the proposed technique.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.414-418
• /
• 2016

In this paper, a hardware architecture of low area gradient magnitude calculator is proposed. For the hardware complexity reduction, the characteristic of orthogonal projection vector and hardware resource sharing technique are applied. The proposed hardware architecture can be implemented without degradation of the gradient magnitude data quality since the proposed hardware is implemented with original algorithm. The FPGA implementation result shows the 15% of logic elements and 38% embedded multiplier savings compared with previous work using Altera Cyclone VI (EP4CE115F29C7N) FPGA and Quartus II v15.0 environment.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.151-161
• /
• 2011

PGA(Phase Gradient Autofocus) is a representative autofocus technique to improve the SAR(Synthetic Aperture Radar) image quality. PGA can estimate high order phase errors and have good robustness in noisy environments. However, PGA is not suitable to apply to the stripmap mode data directly because it is based on the spotlight mode operation. In this paper, the PGA implementation technique for stripmap mode data and the method of ROI(Region of Interest) selection that affects severely on PGA performance have been proposed. The proposed technique was verified by the point target simulation first, and was applied to the real SAR signal data acquired by the flight test. Finally, the significant improvements in focusing quality were shown in the processed SAR images using the proposed method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.4
• /
• pp.566-576
• /
• 1995

A Computational code has been developed in order to design axial fans by the numerical optimization techniques incorporated with flow analysis code solving three-dimensional Navier-Stokes equation. The steepest descent method and the conjugate gradient method are used to look for the search direction in the design space, and the golden section method is used for one-dimensional search. To solve the constrained optimization problem, sequential unconstrained minimization technique, SUMT, is used with imposed quadratic extended interior penalty functions. In the optimization of two-dimensional cascade design, the ratio of drag coefficient to lift coefficient is minimized by the design variables such as maximum thickness, maximum ordinate of camber and chord wise position of maximum ordinate. In the application of this numerical optimization technique to the design of an axial fan, the efficiency is maximized by the design variables related to the sweep angle distributed by quadratic function along the hub to tip of fan.

• Journal of Embryo Transfer
• /
• v.14 no.1
• /
• pp.23-29
• /
• 1999

The objectives of the study were to establish sperm separation method and duration of insemination for bovine IVF. Oocytes from slaughterhouse ovaries were matured and fertilized using general protocol. After 18 or 42 h of insemination, six to ten embryos were placed into a 30${mu}ell$ drop of each medium, and the embryos were examined 7~10d post in semination without medium renewal. First, we compared Percoll gradient will swim-up technique for sperm separation. There was no difference in cleavage rates between them, but the development rates over morula stage of oocytes fertilized with sperm separated by Percoll gradient was significantly higher than that sperm selected by swim-up technique (p<0.05). Second, we evaluated development of bovine embryos derived from the IVF procedure with different durations(18 vs 42 h) of fertilization. There was also no difference in cleavage rates, but the development to blastocyst stage of oocytes exposed in cleavage rates, but the development to blastocyst stage of oocytes exposed to sperm for 42 h was significantly higher than that exposed for 18 h (p<0.05). In conclusion, Percoll gradient can be used for sperm selecton, improving of embryonic development. Also, 42h of IVF may improve the development of bovine embryos.

• Journal of applied mathematics & informatics
• /
• v.8 no.2
• /
• pp.327-343
• /
• 2001

This is a survey article on finite element a posteriori error estimates with an emphasize on gradient recovery type error estimators. As an example, the error estimator based on the ZZ patch recovery technique will be discussed in some detail.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.118-124
• /
• 2016

The shape and location of the cutoff shield in a projection-type headlight system were optimized by a ray-tracing technique. A shield based on a Petsval surface showed better cutoff characteristics than a flat or cylindrical shield, such as a sharp intensity gradient and less color separation at the cutoff line. Adjustment of the shield’s location between the reflector and the aspheric lens further improved its cutoff characteristics.

• Advances in nano research
• /
• v.8 no.4
• /
• pp.265-276
• /
• 2020

A study that primarily focuses on nonlocal strain gradient plate model for the sole purpose of vibration examination, for graphene sheets under linearly variable in-plane mechanical loads. To study a better or more precise examination on graphene sheets, a new advance model was conducted which carries two scale parameters that happen to be related to the nonlocal as well as the strain gradient influences. Through the usage of two-variable shear deformation plate approach, that does not require the inclusion of shear correction factors, the graphene sheet is designed. Based on Hamilton's principle, fundamental expressions in regard to a nonlocal strain gradient graphene sheet on elastic half-space is originated. A Galerkin's technique is applied to resolve the fundamental expressions for distinct boundary conditions. Influence of distinct factors which can be in-plane loading, length scale parameter, load factor, elastic foundation, boundary conditions, and nonlocal parameter on vibration properties of the graphene sheets then undergo investigation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.422-433
• /
• 2001

In this paper, we propose a flew edge detection method based on water flow model, in which gradient image surface is considered as a 3-dimensional (3-D) geographical feature. The edges of the objects in the background can be detected by the large gradient magnitude areas and to make the edges immersed it is required to invert the gradient image. The proposed edge detector uses a water flow model based enhancement and locally adaptive thresholding technique applied to the inverted gradient image resulting in better noise performance. Computer simulations with a few synthetic and real images show that the Proposed method can extract edge contour effectively.