• 정보보호학회논문지
• /
• 제27권6호
• /
• pp.1317-1330
• /
• 2017

서버 정보를 수집해 네트워크 지도를 구축하는 작업은 쉽게 발생하는 보안 사고들을 예방할 뿐만 아니라, 사이버전에 대비하고 적절한 정책을 제안하는데 방향을 제시해준다. 본 논문에서는 기존의 네트워크 스캐너인 Nmap과 ZMap을 분석하고, 네트워크 지도를 만들기 위해 서버 정보를 수집하는 기술로 배너 그래빙(banner grabbing)을 사용했다. 실시간으로 서버 정보를 수집하는 크롤링 도구를 구현하면서 정보 수집 대상이 받는 부하를 줄이기 위해 주소 생성 방식을 고안하고, 속도 향상을 위해 스레드를 나눴다. 구현한 크롤링 도구를 자체적으로 제시한 성능 평가 기준에 따라 기존 네트워크 스캐너를 사용하는 경우와 비교했다. 마지막으로, 크롤링 도구를 활용해 국내외 서버에서 정보를 수집한 DB를 바탕으로 국가별 위험 지표를 도출했으며 국가마다 차이는 있으나 수많은 사용자들이 위험한 공격에 노출되어 있는 실태를 확인했다.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.229.2-229.2
• /
• 2005

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.475-477
• /
• 1997

We have analyzed the fluorescence image obtaining from green fluorescence protein (GFP). In order to monitor the fluorescence of specific gene, we used the amyloid precursor protein promoter which has been known to act as a major role in the development of Alzheimer's disease. The promoter from - 3.0 kb to + 100 base pair was inserted into the gene expression monitoring GFP vector purchased from Clontech. This construct was transfected into the PC 12 and fibroblast cells and the fluorescence image was captured by two kinds of methods. One is using cheaper CCD camera and other is SIT-CCD camera. or the higher sensitivity of the fluorescence image, we developed the multiple image grabbing program. As a results, the fluorescence image by conventional CCD camera have the similar sensitivity compared with that of the SIT-camera by applying the multiple image grabbing programs. By this system. it will be possible to construct the fluorescence monitoring system with lower cost. And gene expression in real time by fluorescence image will be possible without changing the fluorescence images.

• 문화기술의 융합
• /
• 제8권2호
• /
• pp.227-234
• /
• 2022

호남 서부의 전통적인 문한세가(文翰世家)의 후손인 석전(石田) 황욱(黃旭)(18913~1999)은 근·현대 서화계 흐름에 합류하지 않고 평생토록 선비의 풍모를 잃지 않고 자적지적(自適之適)하면서 오로지 전통서예에 천착하면서 독창적 악필법과 서예세계로 만년에 각광을 받았던 인물이다. 6.25 전쟁 직후 두 아들의 좌익활동으로 인해 가정적으로 큰 아픔을 겪으면서 가산은 탕진되었다. 이처럼 인간사에서 가장 고통스럽고 감내하기 힘든 시기에도 필묵시금(筆墨詩琴)에 의지하며 올곧은 선비정신과 민족애를 잃지 않으며 상고정심(尙古正心)하였다. 그리고 세속적인 감관의 쾌락을 초월한 무기무욕(無己無欲)의 '참된 즐거움(大樂)'속에서 자득하고 소요유(逍遙遊)하였다. 그의 학서과정은 특별한 스승없이 왕희지·구양순·안진경·조맹부와 신위·이삼만 등의 서체를 집중 연마하였다. 특히 환갑 이후에 찾아온 수전증으로 인해 절필의 위기를 맞이하였으나 강인한 의지력을 발휘하여 그 누구도 범접치 못할 웅건강기(雄健剛氣)의 악필법을 개발하는 등 새로운 예품과 예격으로 환골탈태하였다. 1965년~1983년까지는 '우수 악필법'을, 1984년~1993년 시기는 '좌수 악필법'을 사용하였다. 1973년(76세) 첫 개인전인 회혼기념서예전을 통해 서예가로서의 명성을 널리 알리게 되었다. 그의 필법은 역대 서법과 인위적인 기교를 초탈하여 천연졸박(天然拙樸)한 본성을 발현하여 생경(生硬)하면서도 근골이 넘친다. 그리고 침저험경(沈着險勁)한 추획사(錐劃沙)와 중후웅건(重厚雄健)한 인인니(印印泥)한 개성적 필의는 기이한 신운을 자아내며 기존 서법을 뛰어 넘는 독창적인 석전체(石田體)를 이루었고, 그의 불굴의 서예정신은 한국서예사에서 독보적 존재로서 여전히 귀감으로 남는다.

• 공학교육연구
• /
• 제15권5호
• /
• pp.98-107
• /
• 2012

As the dropout rate of university students is gradually increasing, the studies on exploring the status, characteristics, reasons, and countermeasures of dropout of university students are currently grabbing high attention. This paper analyzes the relationship between the admission types and dropout of university students, mainly focused on engineering students. The analysis shows that the dropout rate of engineering students admitted through the scheduled-time admission procedures is quite higher than that of students admitted through non-scheduled-time admission procedures, the dropout rate of engineering students admitted from the vocational high schools is higher than that of students from the academic high schools, and the dropout rate of engineering students admitted from the liberal art high school tracks is higher than that of students from the natural science high school tracks. From the results, we could find out that student-support programs need to be carefully provided for the engineering university students according to their admission types and underlying backgrounds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.406-408
• /
• 2001

In this thesis, a video tracker with a TMS320C31 DSP is designed and implemented. It is intended to work with PC through PCI Bus and can be used in real-time applications. The DSP board is capable of grabbing image data from camera, and calculating the position of a target, and tracking its movement. The tracking situation can be displayed in a PC monitor and displacement of the movement is fed back to pan and tilt the camera. Experimental results show that the tracker implemented here works well in real applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2594-2596
• /
• 2001

In this paper, a video tracker with a TMS320C31 DSP is designed and implemented. It is intended to work with PC through PCI Bus and can be used in real-time applications. The DSP board is capable of grabbing image data from camera, and calculating the position of a target, and trackig its movement. The tracking situation can be displayed in a monitor and displacement of the movement is fed back to pan and tilt the camera. Experimental results show that the tracker implemented here works well in real applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.77.5-77
• /
• 2001

A Robot vision system with a visual skill so as take information for arbitrary target or object has been applied to auto-inspection and assembling system. It catches the moving target with the manipulator by using the information from the vision system. The robot needs some information where the moving object will place after certain time. A camera is fixed on a robot manipulator, not on the fixed support outside of the robot. It secures wider working area than the fixed camera, and it dedicates to auto scanning of the object. It computes some information on the object center, angle and speed by vision data, and can guess grabbing spot by arriving time. When the location ...

• Journal of Magnetics
• /
• 제5권3호
• /
• pp.81-84
• /
• 2000

A magneto-optical microscope magnetometer (MOMM) has been developed to simultaneously measure 2-dimensional array hysteresis loops of each local area of $320\times320-nm^2$ spots on ferromagnetic films, in addition to grabbing time-resolved domain evolution patterns. Using the system, spatial distribution of local coercivity can be quantitatively generated and then, compared directly with domain patterns grabbed at precisely the same position of a sample. It is clearly demonstrated that local coercivity distribution governs domain reversal behavior via a thermally activated relaxation process.