• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1210-1214
• /
• 2009

Early postmortem ATP level is known as a good predictor of pork quality. Pork carcasses were divided into two; one was electrically stimulated (ES) to simulate poor quality pork and the other was left untreated and served as a control normal pork. Fractions of longissimus were excised from carcasses regularly for 2 hours after death and deep-frozen ($-80^{\circ}C$) until analyses. The ATP level of normal untreated control pork decreased from 5.00 to 2.04 ${\mu}mole$/g within 2 hours postmortem. The decrement of ATP was approximately 60% of its initial content. In the meantime, ES poor quality pork had a more drastic rate of ATP decrease. Electrical stimulation itself decreased ATP level from 4.70 to 3.50 ${\mu}mole$/g, by approximately 25%. ATP level of ES pork dropped to 1.71 ${\mu}mole$/g within 1 hour postmortem and was further plunged to 0.26 ${\mu}mole$/g and almost exhausted during the next hour. The level of IMP increased from 0.49 to 3.17 ${\mu}mole$/g and it became the dominant nucleotide within 2 hours postmortem. Electrical stimulation prompted the increase of IMP from 0.69 to 3.19 ${\mu}mole$/g and its level went up to 6.64 ${\mu}mole$/g within 2 hours postmortem. The level of ADP also decreased from 1.45 to 0.67 ${\mu}mole$/g for 2 hours after death and ES also accelerated ADP breakdown. The AMP levels were lower than those of other nucleotides and increased from 0.16 to 0.31 ${\mu}mole$/g within 2 hours postmortem. The increase of AMP was accelerated between 60 and 90 minutes after electrical stimulation. Early postmortem electrical stimulation prompted a drastic rate of changes in contents of 4 nucleotides during 2 hours postmortem. In the meantime, the ATP levels for ES poor quality pork were much lower than those of normal pork.

• Asia pacific journal of information systems
• /
• v.18 no.2
• /
• pp.1-14
• /
• 2008

According to technology acceptance model(TAN) which is one of the most important research models for explaining IT users' behavior, on intention of using IT is determined by usefulness and ease of use of it. However, TAM wouldn't explain the performance of using IT while it has been considered as a very good model for prediction of the intention. Many people would not be confirmed in the performance of using IT until they can control it at their will, although they think it useful and easy to use. In other words, in addition to usefulness and ease of use as in TAM, controllability is also should be a factor to determine acceptance of IT. Especially, there is a very close relationship between controllability and ease of use, both of which explain the other sides of control over the performance of using IT, so called perceived behavioral control(PBC) in social psychology. The objective of this study is to identify the relationship between ease of use and controllability, and analyse the effects of both two beliefs over performance and intention in using IT. For this purpose, we review the issues related with PBC in information systems studies as well as social psychology, Based on a review of PBC, we suggest a research model which includes the relationship between control and performance in using IT, and prove its validity empirically. Since it was introduced as qa variable for explaining volitional control for actions in theory of planned behavior(TPB), there have been confusion about concept of PBC in spite of its important role in predicting so many kinds of actions. Some studies define PBC as self-efficacy that means actor's perception of difficulty or ease of actions, while others as controllability. However, this confusion dose not imply conceptual contradiction but a double-faced feature of PBC since the performance of actions is related with both self-efficacy and controllability. In other words, these two concepts are discriminated and correlated with each other. Therefore, PBC should be considered as a composite concept consisting of self-efficacy and controllability, Use of IT has been also one of important areas for predictions by PBC. Most of them have been studied by analysis of comparison in prediction power between TAM and TPB or modification of TAM by inclusion of PBC as another belief as like usefulness and ease of use. Interestingly, unlike the other applications in social psychology, it is hard to find such confusion in the concept of PBC in the studies for use of IT. In most of studies, controllability is adapted as PBC since the concept of self-efficacy is included in ease of use explicitly. Based on these discussions, we can suggest perceived use control(PUC) which is defined as perception of control over the performance of using IT and composed of controllability and ease of use as sub-concepts. We suggest a research model explaining acceptance of IT which includes the relationships of PUC with attitude and performance of using IT. For empirical test of our research model, two user groups are selected for surveying questionnaires. In the first group, there are freshmen who take a basic course for Microsoft Excel, and the second group consists of senior students who take a course for analysis of management information by Excel. Most of measurements are adapted ones that have been validated in the other studies, while performance is real score of mid-term in each class. In result, four hypotheses related with PUC are supported statistically with very low significance level. Main contribution of this study is suggestion of PUC through theoretical review of PBC. Specifically, a hierarchical model of PUC are derived from very rigorous studies in the relationship between self-efficacy and controllability with a view of PBC in social psychology. The relationship between PUC and performance is another main contribution.

• Journal of Mushroom
• /
• v.2 no.2
• /
• pp.88-96
• /
• 2004

This study was executed to decide the physiological characteristics of Ferule mushroom. Four strains of Ferule mushroom were tested to select a superior strain in its mycelial growth. The pertinent substrates, temperature and pH ranges for the growth of selected strain were determined. And then, the wood rotting ability and type of the Ferule mushroom were determined. The superior strain F-2 among four strains was selected, on the basis of its vegetative mycelial growth and density on agar media. Mycelial growth of F-2 was the best on MYPA among other tested synthetic or semi-synthetic media. The temperature range for pertinent mycelial growth was about $25{\sim}34^{\circ}C$ and best at $30^{\circ}C$. The optimum pH range on MYPA was 5.0~6.0. The mycelial growth was mostly stimulated by soluble starch at cont. 1% (w/w) and secondly, maltose among several carabon sources and by mixed solution of YE(0.25%) and ME(0.25%) but not by ME alone. Cell thining and erosion of Pinus rigida wood by the mycelia of Ferule mushroom were found only on a few cell but largely at wood block test, indicating that the softwood rotting ability of Ferule mushroom mycelia was not so good. The result of polarized light microscopy appeared that cellulose of some tracheides showing the S3 layer lost brifringence was degraded by Ferule mushroom. But only part of cellulose of P. rigida wood was degraded by Ferule mushroom, because most of wood cells continued to showing briefingence. A largely degraded ray parenchyma and longitudinal parenchyma cell and partly thinning and erosion of hardwood(Quercus serrata) cell was found and it indicates that the rotting ability of Ferule mushroom mycelia on hardwood was higher than on softwood. It could be concluded that the difference in the wood rot by Ferule mushroom between the hardwood and softwood was made by the difference of chemical constitutions between them, especially in the contents and the types of lignin. Ferule mushroom was considered as white rotter as a result of bavendam test, although more research should be required.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.3
• /
• pp.61-102
• /
• 2007

This study empirically analyzed how human resource management(HRM) practices affect the performance of venture firms using The results of the study are as follows: First of all, several HRM practices were found to affect organizational performance significantly. Specifically, ${(1)}$ recruitment and selection practices were negatively related to turnover, which seemed to mean that effective staffing including development of good recruitment pools and rigorous selection process lower turnover, and ${(2)}$ training and development, compensation, and labor-management relations were positively related to subjective performance of the firms, which implied that as the venture firms provide more opportunities of training and development to employees, provide compensation on the basis of performance, and develop cooperative labor-management relations, the subjective performance of the venture firms Increases. Secondly, negative interaction effects were found to exist between competitive strategies and HRM practices on organizational performance. Specifically, ${(1)}$ the interaction between differentiation strategy and compensation were significantly related to turnover, ${(2)}$ HRM planning and training and development interacted with differentiation strategy to significantly affect subjective organizational performance, and ${(3)}$ HRM planning, selection, training and development, compensation and communication practices interacted with technology innovation strategy to affect subjective organizational performance. So far, there have not been many studies which deal with HRM practices of venture firms in Korea. Thus, it is hoped that this study stimulate more research efforts on theory development and empirical studies on HRM practices of venture firms. Also, it is hoped that government conduct more policy studies and provide more resources in HRM area of the venture firms. Specifically, it is suggested that government take proactive steps to improve industrial skilled staff and technical researcher systems in order to alleviate the problems of workforce shortages in venture firms. And it IS also suggested that regional human resource development programs be introduced with the participation of the firms, local governments, and universities.

• Journal of the Speleological Society of Korea
• /
• no.63
• /
• pp.1-8
• /
• 2004

The non-magnetic materials with non-conductive showing high structure dispersity were developed on the base of natural quartz and lava-scoria which was collected from Je-ju island in Korea, and treated by methane-chemical technology those were obtained novel properties of magnetization through the analyzing. Depending on the processing conditions and subsequent applications the materials produced by strong methane-chemical reaction (MCR) in alcohol solution showed concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segnetomagnetics, containing a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds were synthesized having thickness up to 10～50 nm and showing magnetic, electrical and other properties. It was confirmed in magnetizing process that powders of quartz and lava-scoria produced by MCR were better oil adsorbent as of oleophilic and floating matter on water surface although their specific gravities are comparably more than 1 in quartz or less than unity, as that of water, in lava-scoira. Therefore, it will be Possible and very useful to remove low density and light gravity oil spillage in difficult recovery from sea and inland water contamination spread on water surface, by marine accident and ship sinking accident occurring frequently in recent years, by way of magnetic adsorbent conveyer system in continuous, if it could be built up the mass Production system of water-floating magnetizable oleophilic adsorbent materials with use of iow cost and good Qualify lava-scoria spread on volcano district in Je-ju island. And, there will also be urgent advent of necessity with strong possibility to develop useful applications of various magnetic functional materials include oleophilic adsorbent for removal of sea oil-contaminants and maritime pollutants, and other kinds of various utilities in industrial applications and practical uses of novel functional materials in the fields of environments and health care applications with in deep expectation.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.249-256
• /
• 2011

Finding a new set of features representing textured images is one of the most important studies in textured image analysis. This is because it is impossible to construct a perfect set of features representing every textured image, and it is inevitable to choose some relevant features which are efficient to on-going image processing jobs. This paper intends to find relevant features which are efficient to textured image segmentation. In this regards, this paper presents a different method for the segmentation of textured images based on the Gabor filter. Gabor filter is known to be a very efficient and effective tool which represents human visual system for texture analysis. Filtering a real-valued input image by the Gabor filter results in complex-valued output data defined in the spatial frequency domain. This complex value, as usual, gives the module and the phase. This paper focused its attention on the phase information, rather than the module information. In fact, the module information is considered very useful at region analysis in texture, while the phase information was considered almost of no use. But this paper shows that the phase information can also be fully useful and effective at region analysis in texture, once a good method introduced. We now propose "phase derivated method", which is an efficient and effective way to compute the useful phase information directly from the filtered value. This new method reduces effectively computing burden and widen applicable textured images.

• Korean Journal of Environment and Ecology
• /
• v.28 no.2
• /
• pp.215-234
• /
• 2014

The purpose of this study is to identify the type and characteristics of the domestic natural streams in order to establish a basis for stream restoration and evaluation. To this end, 95 domestic natural stream areas, which have various natural environments, were selected except for the province of island and then the characteristics of natural environment, hydromorpholoy, plant and vegetation were investigated and analyzed in each stream area. As a result, 95 stream areas were classified into total 24 types according to 3 criteria such as stream size (4 types), altitude (3 types), bed material (5 types). Depending on altitude class that is the environmental factor showing the highest correlation with each stream types, the emergence of vegetation and plant, 24 stream types were reclassified into 3 types such as lowland (altitude less than 200m), mountain (altitude from 200m to 500m), highland (altitude more than 500m), and hydromorpholoy, plant and vegetation characteristics of each stream type were compared. First, when compared to the mountain and highland streams, the typical features of lowland streams were as follows: Stream size was large but bed material size was small and there were many valley forms where flood plane were developed well. In addition, the more large stream size was, the more cross-section width variability, bars and sinuosity were in good conditions. In lowland stream, representative vegetation community was Salix koreensis community. On the other hand, when compared to the lowland streams, the typical features of mountain and highland streams were as follows: Stream size was small but bed material was coarse-grained and its size was large. Mountain and highland streams valley form where flood plane was not developed well was narrow, and sinuosity and bars development were weak. Representative vegetation communities of mountain streams were Quercus serrata -, Quercus variabilis -, Styrax japonica community and representative vegetation communities of highland streams were Pinus densiflora -, Quercus mongolica -, Fraxinus rhynchophylla community.

• Korean Journal of Environment and Ecology
• /
• v.27 no.6
• /
• pp.718-732
• /
• 2013

The purpose of this study was to provide data for the basic research to found the effective conservation and management plan for the Geumdangsil Pine Forest of Yecheon designated as Natural Monument No. 469. Furthermore, this paper suggest efficient sustainable forest preservation and using. In order to achieve the sustainable forest preservation, this study was to analyse topography, land use, tree growth, soil environment, forest usage and forest management, etc. According to analysis the results, the site area is located in the flatlands where is from 130 to 140 m above sea level. The around forest was transformed into agricultural land. The 565 individuals of Pinus densiflora grows in the forest, whereas, 25 trees was cut down or died. There are signs of 25 stumps. The most of 565 trees' diameter at breast height(DBH) was centerized between 30 cm and 50 cm, moreover, the average life expectancy of trees were 85.4 years. The oldest age of tree was estimated to be 200 years. The Sample trees of rate of branch growth is from 4.3 cm to 5.1 cm per year. The middle branch which is more vigorous growth grow 24.2 cm for 3 years. Moreover, the result of soil physico-chemical properties analysis of 7 plots, 4 categories which is soil organic matter, total nitrogen, available phosphoric acid, specific electrical conductance was generally good, however, the 2 categories which is soil pH, exchangeable cation needed improvement. Currently, the site was not pressured by facilities and usage, however, there might be threaten by agriculture such as encroaching on forest. Therefore, there should establish comprehensive ecosystem management such as facility management, visitors management and operation management In this paper considered 4 fields that is ecosystem management, facility management, visitors management and operation management for sustainable management.

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.145-155
• /
• 2005

A two-dimensional (2-D) interpretation of MT data has been performed for the purpose of fracture detection for geothermal development. Remote stations have been operated in Kyushu, Japan (480 km apart) as well as in Korea (60 km and 165 km apart in 2002 and 2003 data set, respectively). Apparent resistivity and phase curves calculated by remote processing with the Japan remote data showed enough quality for 2-D inversion for the whole frequency range. Remote reference processing with Korea remote reference data also showed quite good continuity in apparent resistivity and phase curves except some noisy frequency bands; around the power frequency, 60 Hz, and around the dead band $10^{-1}Hz\;Hz\;\~1\;Hz$, where the natural EM signal is known to be very weak. Even though the subsurface showed severe three-dimensional (3-D) characteristics in the survey area so that 2-D inversion by itself could not give enough information for deep geological structures, the 2-D inversion for the 5 survey lines showed several common features. The conductive semi-consolidate mudstone layer is dipping from north to south (about 500 m depth on the south and 200 m on the north most part of the survey area). The boundary between the low (L-2) and high (H-2) resistivity anomalies can be thought as a major fault with strike $N15^{\circ}E$, passing through the sites 206, 112 and 414. The shallow (< 1 km) conductive anomalies (L-4) seem to be fracture zones having strike E-W (at site 105) and $N60^{\circ}W$ (at site 434). And there exists a conductive layer in the western and west-southern part of the survey area in the depth below $2\~3\;km$, for which further investigation is to be needed.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.10-10
• /
• 2017

Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.