• The Korea Journal of Herbology
• /
• v.23 no.2
• /
• pp.33-40
• /
• 2008

Objectives : In order to distinguish morphological characteristics, because the inside portion of the root bark of Scutellariae Radix decomposes as time goes by, 2nd, 3rd, and 5th year Scutellariae Radix were sampled and compared according to their external, internal, and flour states through optical microscope. Methods : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and the flour of it was mounted by the liquid made by the same ratio of each of glycerin, acetic acid, and water, and then observed and photographed by olymphus-BHT. Results : 1. The inside of 2nd year Scutellariae Radix was rich and golden, the transverse section of Scutellariae Radix that was 3rd years of age was golden, but there were many Scutellariae Radix whose center portion turned redish brown, and the center portion of 5th year Scutellariae Radix had been decomposed or empty. 2. 2nd year Scutellariae Radix had the most starch grain, 5th year Scutellariae Radix had the least, and the middle portion of xylem that was 5 years of age had a cell ring that was corkish, but 2nd and 3rd year Scutellariae Radix did not have it. 3. In the flour state, 2nd, 3rd, and 5th year Scutellariae Radix did not have any difference, but the amount of starch grain was the most in 2nd year Scutellariae Radix and the least in 5th year Scutellariae Radix.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.161-166
• /
• 2020

This paper suggests an extension of the unified Bayesian Tikhonov regularization method. The unified method establishes the relationship between Tikhonov regularization parameter and Bayesian hyper-parameters, and presents a formula for obtaining the regularization parameter using the maximum posterior probability and the evidence framework. When the dimension of the data matrix is m by n (m >= n), we derive that the total misfit has the range of m ± n instead of m. Thus the search range is extended from one to 2n + 1 integer points. Golden section search rather than linear one is applied to reduce the time. A new benchmark for optimizing relative error and new model selection criteria to target it are suggested. The experimental results show the effectiveness of the proposed method in the image restoration problem.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.2
• /
• pp.1-10
• /
• 2009

The purpose of this study is to investigate harmonious color schemes based on a length proportion of upper and lower parts of a body by; understanding of the harmonious length proportion of a square measure of a color in color coordination of fashion design, and presenting a mutual relation of the length proportion of a square measure of a color according to the various way of color schemes and proportions. For this study, monochromatic scheme, analogous scheme and complementary scheme were adapted as the color schemes, and each color scheme was coordinated by analogous tone and contrast tone. Also, 1:1 symmetry proportion, 1:2 harmonic proportion, 1:1.618 golden section, 1:3 and 1:5 contrast proportion were used as the square measure of a color. For the survey, 12 sets of color sample were organized. The survey was conducted 182 of university students majored in fashion design, and 143 responded samples were analyzed using SPSS 12. The result of the study is as follows: 1:5 contrast proportion is most inharmonious in general, and 1:1 symmetry proportion is followed. It is thought that too much or same length of the square measure of colors has less attractive effect of coloring. On the other hand, 1:1.618 golden section and 1:2 harmonic proportion are accepted to be harmonious in all color schemes. The length proportion of the square measure of a color had more influence on harmony of color coordination in fashion design rather than color schemes. Though, on the assumption that people have a similar perception about the color image of fashion design, it will play an important role in strengthening or diminution of color in cloth if the coloring effect of the length proportion of the square measure of a color is used in fashion design and wearing of clothes.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.91-95
• /
• 2014

We could use a social networking service such as data communication, personalized service through smart devices as Tablet computers and smart phones. Because of these characteristics, suitable lectures are provided to mobile device. especially, in Korea Cyber University already had built a lot of infrastructures. But, many mobile devices are used in a small display environment. it could effect on reduce Students' efficiency from taking courses. Therefore, we need effectively in a small display content layout for overcome these problems. In this paper, proposed the platform for Improve learning effect in smartphone education. It studied based on golden section and golden spiral theory. and also, we developed layout for content development using vector method illustration program.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.643-653
• /
• 2017

The paper presents controller optimization algorithm for a 12-pulse voltage source converter (VSC) based high voltage direct current (HVDC) system. To get an optimum algorithm, three methods namely conventional-Zeigler-Nichols, linear-golden section search (GSS) and stochastic-particle swarm optimization (PSO) are applied to control of 12 pulse VSC based HVDC system and simulation results are presented to show the best among the three. The performance results are obtained under various dynamic conditions such as load perturbation, non-linear load condition, and voltage sag, tapped load fault at points-of-common coupling (PCC) and single-line-to ground (SLG) fault at input AC mains. The conventional GSS and PSO algorithm are modified to enhance their performances under dynamic conditions. The results of this study show that modified particle swarm optimization provides the best results in terms of quick response to the dynamic conditions as compared to other optimization methods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.793-796
• /
• 2010

The equalizer compensates a signal distorted by transmission lines and amplifying stages, so the signal can have uniform characteristics over all frequency range. The equalizer in ODD(Optical Disc Drive) improves the stability of the extracted clock from a received signal and the readability of an inserted disc by suppressing noise and ISI(Inter-Symbol Inference). The length of marks-spaces and track pitch on discs becomes shorter as the recording density of an optical media is higher, which causes noise and ISI. And, the sensitivity about the fluctuation of physical systems is higher as the optical devices become more complicate. This paper proposes a method to select the coefficient of built-in equalizer of ODD in order to maintain the quality of signals against noise and ISI caused by system fluctuation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.4
• /
• pp.811-825
• /
• 1998

An approximate line search is presented for dynamic response optimization with Augmented Lagrange Multiplier(ALM) method. This study empolys the approximate a augmented Lagrangian, which can improve the efficiency of the ALM method, while maintaining the global convergence of the ALM method. Although the approximate augmented Lagragian is composed of only the linearized cost and constraint functions, the quality of this approximation should be good since an approximate penalty term is found to have almost second-order accuracy near the optimum. Typical unconstrained optimization algorithms such as quasi-Newton and conjugate gradient methods are directly used to find exact search directions and a golden section method followed by a cubic polynomial approximation is empolyed for approximate line search since the approximate augmented Lagrangian is a nonlinear function of design variable vector. The numberical performance of the proposed approach is investigated by solving three typical dynamic response optimization problems and comparing the results with those in the literature. This comparison shows that the suggested approach is robust and efficient.

• Management & Information Systems Review
• /
• v.2
• /
• pp.75-93
• /
• 1998

In this paper, we propose a new algorithm(N_BP) to be capable of overcoming limitations of the traditional backpropagation(O_BP). The N_BP is based on the method of conjugate gradients and calculates learning parameters through the line search which may be characterized by order statistics and golden section. Experimental results showed that the N_BP was definitely superior to the O_BP with and without a stochastic term in terms of accuracy and rate of convergence and might surmount the problem of local minima. Furthermore, they confirmed us that the stagnant phenomenon of learning in the O_BP resulted from the limitations of its algorithm in itself and that unessential approaches would never cured it of this phenomenon.

• Journal of Mechanical Science and Technology
• /
• v.14 no.9
• /
• pp.1005-1012
• /
• 2000

Numerical optimization techniques combined with a three-dimensional thin-layer Navier-Stokes solver are presented to find an optimum shape of a stator blade in an axial compressor through calculations of single stage rotor-stator flow. Governing differential equations are discretized using an explicit finite difference method and solved by a multi-stage Runge-Kutta scheme. Baldwin-Lomax model is chosen to describe turbulence. A spatially-varying time-step and an implicit residual smoothing are used to accelerate convergence. A steady mixing approach is used to pass information between stator and rotor blades. For numerical optimization, searching direction is found by the steepest decent and conjugate direction methods, and the golden section method is used to determine optimum moving distance along the searching direction. The object of present optimization is to maximize efficiency. An optimum stacking line is found to design a custom-tailored 3-dimensional blade for maximum efficiency with the other parameters fixed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.544-556
• /
• 1991

The optimization of many engineering design problems requires a nonlinear programming algorithm that is robust and efficient. A general-purpose nonlinear optimization program IDOL (Interactive Design Optimization Library) is developed based on the Augmented Lagrange Mulitiplier (ALM) method. The ideas of selecting a good initial design point, using resonable initial values for Lagrange multipliers, constraints scaling, descent vector restarting, and dynamic stopping criterion are employed for computational enhancement to the ALM method. A descent vector is determined by using the Broydon-Fletcher-Goldfarb-Shanno (BFGS) method. For line search, the Incremental-Search method is first used to find bounds on the solution, then the bounds are reduced by the Golden Section method, and finally a cubic polynomial approximation technique is applied to locate the next design point. Seven typical test problems are solved to show IDOL efficient and robust.