A new medical delivery system which regulated outpatient department(OPD) use from tertiary care hospitals was adopted in 1989. Under the new system, patients using tertiary care hospital OPD without referral slip from clinics or hospitals could not get any insurance benefit for the services received from the tertiary care hospital. This study was conducted to evaluate the Patient Referral System(PRS) with respect to health care expenditures and utilization. Two data sets were used in this study. One was monthly data set(from January 1986 to December 1992) from the Annual Report of Korea Medical Insurance Corporation(KMIC). The other was monthly joint data set composed of personal data of which 10% were selected randomly with their utilization data of KMIC from January 1988 to December 1992. The data were analyzed by time-series intervention model of SAS-ETS. The results of this study were as follows: 1. There was no statistically significant changes in per capita expenditures following PRS. 2. Utilization episodes per capita was increased statistically significantly after implementation of PRS. The use of clinics and hospitals increased significantly, whereas in tertiary care hospitals the use decreased significantly immediately after implementation of PRS and increased afterwards. 3. Follow-up visits per episode were decreased statistically significantly after implementation of PRS. The decrease of follow-up visits per episode were remarkable in clinics and hospitals, whereas in tertiary care hospitals it was increased significantly after implementation of PRS. 4. There was no statistically significant changes in prescribing days per episode following PRS. Futhermore, clinics and hospitals showed a statistically significant decrease in prescribing days per episode, whereas in tertiary care hospital it showed statistically significant increase after implementation of PRS. 5. Except high income class, the use of tertiary care hospitals showed statistically significant decrease after implementation of PRS. The degree of decrease in the use of tertiary care hospitals was inversely proportional to income. These results suggest that the PRS policy was not efficient because per capita expenditures did not decrease, and was not effective because utilization episodes per capita, follow-up visits per episode. and prescribing days per episode were not predictable and failed to show proper utilization. It was somewhat positive that utilization episodes per capita were decreased temporarily in tertiary care hospitals. And PRS policy was not appropriate because utilization episodes per capita was different among income groups. In conclusion, the PRS should be revised for initial goal attainment of cost containment and proper health care utilization.
Conventionally, greenhouse gas (GHG) emissions in the transport sector have been estimated using the fuel consumption (i.e. Tier 1 method). However, the GHG emissions on road networks may not be practically estimated using the Tier 1 method because it is not practical to monitor fuel consumption on a road segment. Further, air pollutant emissions on a road may not be estimated efficiently by the Tier 1 method either due to the diverse characteristics of vehicles, such as travel speed, vehicle type, model year, fuel type, etc. Given these conditions, the goal of this study is to propose a Tier 3 level methodology to calculate $CO_2$ and $NO_X$ emissions on inter-regional roads using the information from ITS infrastructure. The methodology may avoid the under-estimation issue caused by the concavity of emission factor curves because the ITS speed or volume information is aggregated by a short time interval. The proposed methodology was applied to 4 road segments as a case study. The results show that the management of heavy vehicles' speed is important to control the $CO_2$ and $NO_X$ emissions on road networks.
Journal of the Korean association of regional geographers
/
v.2
no.1
/
pp.87-114
/
1996
This paper is the second part of a research which aims to look into the regional development process and the quality of life of Youngnam area. and to suggest a prospect and tasks for the future development of the region. All cities and regions including Youngnam area seem to be involved in a rapidly changing process of conditions for development, because of a recent economic and political transformation in the national and global scale. It can be thus said that, taking such a process into consideration seriously, each city or region needs to establish a long-term prospect and goal, and to set up and practicize its development plan. From this point of view, this paper reconsiders the changing process of conditions for development of Youngnam region, and suggests an alternative development plan. At the first, the changing conditions of regional development are investigated in economic, political, social, cultural and environmental aspects. Secondly, some actual planning practices in this regions are examined and their problems are pointed out. Thirdly, an alternative model for regional development is suggested and development tasks in each aspects are discussed in relation to each other. Finally some regional development strategies are provided in the spatial as well as the sectoral dimision. As a results of this research, it is argued that the development of Youngnam region should pursue both an improvement of socio-cultural and ecological institutions for ensuring humane life of dwellers within the region, and a enforcement of economic and political self-sufficiency in an organic relation between regions and to the whole society. This kind of argument can be applied to every city or region. But it would more significant for Youngnam region, because this region, which once experienced a rapid economic growth but now is fallen into a serious economic stagnation, tends to contrive material plans to redevelop regional economy, while ignoring social plans to improve quality of life.
Entering upon 21th, the internet which bring the digital era, are changing the paradigm of education and cultivating creative and challenging person, which is the core of competitive power in knowledge-information society, is more emphasized than ever. To meet the needs of the present times, it has been concentrating its effort to improve learning-environment using e-Learning in the field of teaching. E-schoolbooks that were introduced recently by way of showing an example are representative case of this intention. Though many e-learning contents are being developed, the more speedily a society grow, the shorter the life of contents are. Moreover, the contents developed are impossible to use directly for tele-education system, so standard types adjusted for various kind of system are showing up. Among them the leading standard type is SCORM(Sharable Content Object Reference Medel) made in ADL(Advanced Distributed Learning) Corporation. The KERIS' Cyber Home Education System adopted this and is using it. So, in this study, we set the goal at designing and developing an e-learning contents and an experiment-focused mathematics that suit the KERIS' Cyber Home Education System on the basis of SCORM.
Starting with the "Smart Grid National Road Map" in 2010, the Smart Grid 2030 was introduced through the basic plan and implementation plan of the intelligent power grid with the goal of building the world's first national smart grid. In this paper, we intend to build a power domain ontology based on the power business platform based on the upper and lower conceptual models of the "Smart Grid Interoperability Standard Framework and Roadmap", the standard of implementation plan. Ontology is suitable for expressing and utilizing the smart grid conceptual model because it considers hierarchical structure as knowledge defines the properties of entities and relationships between entities, but there is no research related to them. Therefore, in this paper, the upper ontology was defined as a major category for smart grid-related fields, and the lower ontology was defined as detailed systems and functions for the upper ontology to construct the ontology. In addition, scenarios in various situations that could occur in the power system were constructed and significant inference results were derived through inference engines and queries.
Journal of The Korean Association For Science Education
/
v.33
no.7
/
pp.1385-1402
/
2013
This study analyzes pre-service teachers' PCK dealing with visualization of the contents related to boiling point elevation and teaching methods in mock-lessons. As a result of analyzing pre-service teachers' knowledge based on PCK factors, most of the pre-service teachers accentuated on understanding boiling point elevation conceptually, whereas some of the others inclined to make students understand boiling point elevation in a scientific way, let the kids use numerical formulas to describe the concept, and motivate them to learn through the examples in real life. The pre-service teachers represented majority of the important facts of boiling point elevation as the knowledge required to understand things conceptually. However, they did not focus on improving the scientific thinking and inquiring levels of the students. Also, the pre-service teachers tended to teach at the level and order of the textbook. In some other cases, they considered the vocabularies and materials in the textbook (which could have been highlighted in the editing sequence) as the main topic to learn, or regarded the goal as giving students the ability to solve exercises in the textbook. It turned out that the pre-service teachers had a low level of knowledge of their students. It is recommended that they should make use of the materials given (such as data related to the misconception of students) during the training session. The knowledge of teaching and evaluating students was described superficially by the pre-service teachers; they merely mentioned the applications of models, such as the cyclic model and discovery learning, rather than thinking of a method related to the goals, or listed general assessment methods.
After more than 10 years construction, KSTAR (Korea Superconducting Tokamak Advanced Research) had finally completed its assembly in June 2007, and then achieved the goal of first-plasma in July 2008 through the four month's commissioning. KSTAR was constructed with fully superconducting magnets with material of $Nb_3Sn$ and NbTi, and their operation temperatures are maintained below 4.5K by the help of Helium Refrigerator System. During the first-plasma operation, plasmas of maximum current of 133kA and maximum pulse width of 865ms were obtained. The KSTAR Integrated Control System (KICS) has successfully fulfilled its missions of surveillance, device operation, machine protection interlock, and data acquisition and management. These and more were all KSTAR commissioning requirements. For reliable and safe operation of KSTAR, 17 local control systems were developed. Those systems must be integrated into the logically single control system, and operate regardless of their platforms and location installed. In order to meet these requirements, KICS was developed as a network-based distributed system and adopted a new framework, named as EPICS (Experimental Physics and Industrial Control System). Also, KICS has some features in KSTAR operation. It performs not only 24 hour continuous plant operation, but the shot-based real-time feedback control by exchanging the initiatives of operation between a central controller and a plasma control system in accordance with the operation sequence. For the diagnosis and analysis of plasma, 11 types of diagnostic system were implemented in KSTAR, and the acquired data from them were archived using MDSpius (Model Driven System), which is widely used in data management of fusion control systems. This paper will cover the design and implementation of the KSTAR integrated control system and the data management and visualization systems. Commissioning results will be introduced in brief.
Journal of the Korea Organic Resources Recycling Association
/
v.10
no.2
/
pp.100-116
/
2002
There are several purpose to introduce microorganism into the Soil. The major purpose is to promote plant growth and inhibit plant pathogens. The model example is to put in nitrogen fixing symbiotic bacteria, Pythium and Rhizobium. In order to achieve the intended goal, the introduced microorganism should survive and colonize with sufficient density. The survival of introduced microorganism depend upon biotic and abiotic factors. Predation and competition are important among biotic factor. Water tension, organic carbon, inorganic nutrients(N, P), pH are important factor among abiootic factor. Soil texture and distribution of soil pore are also important in the survival and colonization of introduced microorganism. Selection by soil ecosystem for inoculant is a crucial factor for colonization. Good example are control of autochtonous microorganism and the introduction of surfactant biodegrading Pseudomonas. Sometimes, carriers such as peat and montmorillonite can be added to help colonization. Carriers can protect introduced microorganism by supplying protective microhabitat. Organic polymer is also used as a carrier to immobilize bacteria or industrial enzymes. Examples of these carrier are calcium alginate, agarose and k-carrageenan. The function of these carrier is to provide microhabitat and help colonization for introduced microorganism.
Journal of the Korean Institute of Intelligent Systems
/
v.20
no.6
/
pp.786-792
/
2010
This paper presents a real-time lane detection method which can accurately find the lane-mark boundaries in complex road environment. Unlike many existing methods that pay much attention on the post-processing stage to fit lane-mark position among a great deal of outliers, the proposed method aims at removing those outliers as much as possible at feature extraction stage, so that the searching space at post-processing stage can be greatly reduced. To achieve this goal, a grid-based morphology operation is firstly used to generate the regions of interest (ROI) dynamically, in which a directional edge-linking algorithm with directional edge-gap closing is proposed to link edge-pixels into edge-links which lie in the valid directions, these directional edge-links are then grouped into pairs by checking the valid lane-mark width at certain height of the image. Finally, lane-mark colors are checked inside edge-link pairs in the YUV color space, and lane-mark types are estimated employing a Bayesian probability model. Experimental results show that the proposed method is effective in identifying lane-mark edges among heavy clutter edges in complex road environment, and the whole algorithm can achieve an accuracy rate around 92% at an average speed of 10ms/frame at the image size of $320{\times}240$.
This study is focusing on activating and developing the right model of win-win partnership innovative activity for the purpose of win-win relationship among companies. These are the following studies that are conducted for that objective. First, This study systematically analyzes the best cases of the win-win partnership focusing on the proceedings of the companies participating in the field of win-win Partnership at the national quality-circle contest for the last three years(2014~2016). This study reveals the underlying problems of win-win partnership innovative activity and draws the conclusion in the way of improvement about the win-win partnership innovative activity. Second, This study suggests the efficient method of the function and improvement of a system for activating win-win partnership innovative activity by analyzing screening criterion and selecting excellent cases in the field of win-win Partnership at the national quality-circle contest in 2017. Third, This study suggests the method of strengthening the system of sharing result for invigorating and motivating the win-win partnership innovative activity. It is expected that this methodology for reinforcing the system of Win-win Partnership among companies will help to create the environment where a sound and new corporate culture can be settled. And It is also expected that this study can contribute to attaining the goal of growing together through enhancing the competitiveness, productivity and quality among Win-win Cooperation companies.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.