• 동아시아식생활학회지
• /
• 제4권2호
• /
• pp.45-49
• /
• 1994

The rapid preparaton method of soybean curd with ultra fine soy powder at home was investigated. The microwave oven of this study used common microwave attached sensor for the volume and temperature control, The temperature of the microwave oven was maintained at 98, not boiling over. It took 9 minutes to make 300g of soybean curd, 10 minutes to make 600g, 14 minutes to make 900g, and 17 minutes to make 1200g. Beany flavor and trypsin inhibitor could be removed by this conditon. It took only 5 min to make coaguation of the curd by glucono-$\delta$-lactone.

• 한국식품조리과학회지
• /
• 제10권3호
• /
• pp.284-290
• /
• 1994

To prepare soybean curds, the concentration of $CaCl_2,\;MgCl_2,\;CaSO_4$ and glucono-%{\delta}$-lactone fresh solution as coagulants were determined by transmittance of whey using spectrophotometer. The concentrations of four coagulants at which the transmittance had the highest value were chosen. Moisture content, yield and protein recovery of soybean curds prepared with four coagulants were investigated. The textural properties were examined by Instron Universal Testing Machine, and sensory evaluation was carried out. The microstructure of soybean curds was examined by SEM. Soybean curds obtained with $CaCl_2\;and\;MgCl_2$ were hard and coarse, and had roasted nutty taste, whereas those with $CaSO_4$ and GDL revealed very smooth, soft and uniform. Soybean curd prepared with GDL had the lowest acceptability because of sour taste. The texture and acceptability of soybean curds were influenced by the type of coagulant.

• 한국식품영양학회지
• /
• 제19권1호
• /
• pp.22-27
• /
• 2006

탈지 대두분을 이용하여 두부를 제조함에 있어 각 공정의 최적조건을 알아보았다. 탈지 대두분을 물과 1:9 (wt/wt)의 비율로 혼합하고 용액을 교반하면서 가열하였다. 탈지 대두분 두유를 $80^{\circ}C$ 이상으로 가열해야 응고제를 가할 경우 단백질이 응고현상을 보였으며 두부의 형태로 만들 수 있었다. 한편 탈지 대두분 두유의 가열 온도 $80^{\circ}C$에서 가장 높은 수율로 두부가 제조되었다. 두부의 수분 함량 역시 탈지 대두분 두유 가열 온도에 의해 영향을 받는 것으로 나타났다. $85{\sim}90^{\circ}C$에서 77%로 가장 높은 수분 함량을 나타내었다. 따라서 $80^{\circ}C$이상으로 탈지 대두분 두유를 가열하는 과정이 두부 제조에 필수적인 과정인 것으로 판단된다. 탈지 대두분 두유의 가열시간의 경우, 5분 미만일 때 응고현상을 나타내지 않았고 가열시간이 $5{\sim}10$분일때 두부의 무게가 증가하는 경향을 보였으며 수분함량은 $1{\sim}10$분 사이일 경우 80% 정도로 유지되었으나 10분을 초과할 경우 수분함량이 감소하는 것으로 나타났다. 따라서 두부를 $5{\sim}10$분 가량 가열하는 것이 대두 단백질의 변성이 충분하게 일어나고 두부의 수분 함랑도 적절하게 유지되는 것으로 사료된다. 지방질을 20 g 첨가하였을 때 두부의 무게와 수분함량이 가장 높았으며 그 이상으로 첨가하였을 때는 두부의 무게와 수분 함량이 감소하는 경향을 나타냈다. 이는 높은 지방 함량이 두부 조직과 물 분자 사이의 결합을 방해하기 때문인 것으로 사료된다. 글루코노 델타 락톤 첨가량이 증가함에 따라 제조된 두부의 무게는 비례하게 증가되었고 12 g 이상 첨가된 두부의 무게는 일정한 수준을 유지하였다. 글루코노 델타 락톤 첨가량은 견고성에 영향을 끼치는데 첨가량이 5 g일 때 가장 단단한 두부가 만들어졌으며 그 이상을 첨가하면 견고성은 감소하다 추가적인 글루코노 델타 락톤 첨가에도 거의 일정한 수준을 유지하는 경향을 보였다. 응고제 첨가온도에 따른 두부의 무게는 $75^{\circ}C$일 때 가장 많은 두부가 제조되었으며 $65^{\circ}C$의 낮은 온도나, $85^{\circ}C$의 높은 온도에서는 무게가 감소하는 경향을 나타내었다. 수분함량 역시 $75^{\circ}C$에서 가장 높은 수분함량을 나타내었고 낮은 온도와 높은 온도에서는 비교적 수분함량이 감소하는 경향을 보였다. 두부의 저장성은 실온과 $4^{\circ}C$ 모두 저장시간이 경과할수록 colony 수가 증가하였다.

• Journal of Dairy Science and Biotechnology
• /
• 제36권3호
• /
• pp.171-177
• /
• 2018

In this study, we aimed to investigate the effects of low-temperature encapsulation on the viability of Weissella cibaria CMU under harsh conditions and in freeze-dried foods during storage. The capsules were prepared by gelation of sodium caseinate at different concentrations (5%, 6%, 7%, and 8%) with a combination of 0.5% gellan gum and 2% $glucono-{\delta}-lactone$. The size distribution of the capsules was determined using a Mastersizer 3000 laser diffraction particle size analyzer. Scanning and transmission electron microscopy revealed that the capsule with 6% sodium caseinate had a smooth and rounded external surface, with reproducibility. The acid, bile, and heat tolerances of the encapsulated cells were significantly higher than those of the control under prolonged acid (5 h), bile (12 and 24 h), and heat (2 h) exposure, respectively. During storage for up to 6 months at $4^{\circ}C$ or $25^{\circ}C$, the viability of encapsulated Weissella cibaria CMU in beef and vegetable rice porridge was effectively improved.

• 한국축산식품학회지
• /
• 제29권5호
• /
• pp.590-598
• /
• 2009

The aim of this study was to model and optimize the calcium alginate (CA) and microbial transglutaminase (TG) systems to form a cold-set myofibrillar protein (MP) gel containing 0.1 M or 0.3 M NaCl using a response surface methodology. The gel strengths of cold-set and heat-induced MP gels, and cooking yields were measured. All measured parameters showed determination coefficients ($R^2$) above 0.7 without a lack-of-fit. The CA system had the best results with component ratios of 1.0:0.3:1.0 corresponding to sodium alginate, calcium carbonate and glucono-$\delta$-lactone, respectively, and was favourable at 0.1 M NaCl. In contrast, the TG system only had an effect on cold-set MP gelation at 0.3 M salt, and the optimal ratio of TG to sodium caseinate was 0.6:0.5. By combining the two systems at 0.3 M NaCl, an acceptable cold-set MP gel with an improved texture and high cooking yield could be formed. Therefore, these results indicated that the functionality of the cold-set MP gel could be enhanced by combining these two optimized gelling system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권3호
• /
• pp.418-423
• /
• 2007

Meats with alginate binders including sodium alginate, glucono-delta-lactone and calcium carbonate were tested in restructured steaks made from M. pectoralis profundus of beef steers in terms of meat quality and binding ability by tumbling time. The treatment with 25 min tumbling time was significantly lower (p<0.05) for crude protein than 5 and 15 min, while higher (p<0.05) for moisture content. This corresponded with sensory panel juiciness ratings, which showed the treatment for longer tumbling times to be significantly juicier (p<0.05) than that for a shorter time. Cooking loss decreased (p<0.05) linearly with an increased tumbling time, and Kramer shear force also significant decreased (p<0.05) with tumbling time. This corresponded with sensory panel tenderness ratings, which showed that the treatment for longer tumbling times was more tender (p<0.05). The texture results indicated that longer tumbling time had lower (p<0.05) hardness and chewiness values. Sensory panels ranked binding ability in the order 5 min, 15 min and 25 min from best to worst, and the overall acceptability for slices from roasts of treatments for 5 and 15 min were rated by the sensory panelists as moderate to very acceptable, but those for 25 min were rated as fair to moderate.

• 한국축산식품학회지
• /
• 제32권3호
• /
• pp.301-307
• /
• 2012

We investigated the effects of non-meat protein binders combined with glucono-${\delta}$-lactone (GdL) on the binding properties regarding restructured pork prepared by high-pressure treatment. Soy protein isolate (SPI), casein (CS), whey protein concentrate (WPC), and egg white (EW) were used as non-meat protein binders and compared with the control (no binder) and with the ${\kappa}$-carrageenan (KC) treatment. The compression and depression rates were 2.3 and 37 MPa/s, respectively, and pressurization was conducted at 200 MPa for 30 min at $4^{\circ}C$. After pressurization, the physical properties (pH, water-holding capacity, color, tensile strength, and microscopic structure) of the sample were evaluated. The combination of pressurization with acidification enabled cold-set meat binding, and the binding strength of restructured pork was enhanced by the addition of non-meat proteins. Among binders, SPI demonstrated the best efficiency in binding meat pieces. Therefore, the present study demonstrated that the combination of acidification and pressurization processes with the utilization of non-meat protein binders has a potential benefit in meat restructuring.

• Journal of Microbiology and Biotechnology
• /
• 제1권3호
• /
• pp.188-196
• /
• 1991

The ${\beta}-glucosidase$ was purified to homogeneity from the culture filtrate of P. verruculosum by column chromatography. The enzyme was a glycoprotein with a relative size of approximately 220 kDa with an isoelectric point of 4.8, which was composed of dimeric protein of 105 kDa. The enzyme was stable up to $60^{\circ}C$ and the presence of glycerol significantly increased its thermostability. The enzyme was found to hydrolyze both ${\beta}-aryl$ and ${\beta}-alkyl-glucosides$ in addition to ${\beta}-glucosyl$ glucose and catalyzed glucosyl transfer to cellobiose. The enzyme attacked laminarin in an exotype-like fashion. The apparent Km's of the enzyme toward cellobiose, laminaribiose, laminarin were 0.53 mM, 0.35 mM and 1.11 mM, respectively. Glucose and glucono-${\delta}-lactone$ were competitive inhibitors for the enzyme. Copper ($Cu^{2+}$), mercury ($Hg^{2+}$) and p-chloromercuribenzoate were strong inhibitors of the enzyme. The immunoblotting result revealed that one form of ${\beta}-glucosidase$ was biosynthesized, irrespective of carbon sources used. Polyacrylamide gel electrophoresis analysis of the in vitro translated product of total RNA from avicel grown mycelium established that the P. verruculosum ${\beta}-glucosidase$ precursor was approximately 95 kDa in size. The amino acid composition and N-terminal amino acid sequence are given.

• Journal of Microbiology and Biotechnology
• /
• 제21권5호
• /
• pp.503-508
• /
• 2011

A ${\beta}$-glucosidase from Phoma sp. KCTC11825BP isolated from rotten mandarin peel was purified 8.5-fold with a specific activity of 84.5 U/mg protein. The purified enzyme had a molecular mass of 440 kDa with a subunit of 110 kDa. The partial amino acid sequence of the purified ${\beta}$-glucosidase evidenced high homology with the fungal ${\beta}$- glucosidases belonging to glycosyl hydrolase family 3. Its optimal activity was detected at pH 4.5 and $60^{\circ}C$, and the enzyme had a half-life of 53 h at $60^{\circ}C$. The $K_m$ values for p-nitrophenyl-${\beta}$-D-glucopyranoside and cellobiose were 0.3 mM and 3.2 mM, respectively. The enzyme was competitively inhibited by both glucose ($K_i$=1.7 mM) and glucono-${\delta}$-lactone ($K_i$=0.1 mM) when pNPG was used as the substrate. Its activity was inhibited by 41% by 10 mM $Cu^{2+}$ and stimulated by 20% by 10 mM $Mg^{2+}$.

• 한국식품과학회지
• /
• 제27권3호
• /
• pp.324-328
• /
• 1995

두부의 제조공정(응고제 종류 및 양, 두유가열온도, 성형압력)에 따른 두부의 물성학적 성질의 변화를 파손강도와 응력완화현상을 이용하여 측정, 분석하였다. 각 응고제$(CaCl_2,\;MgCl_2,\;CaSO_4,\;GDL)$ 중에서 $CaCl_2$가 가장 뛰어난 파손강도를 보였으며 대부분 0.3%에서 최대치를 보였다. 가열온도는 $95^{\circ}C$에서 최대의 강도를 나타내었고 성형압력 15 kgf에서 모든 응고제를 이용한 두부는 성형되었으며, 일반적으로 성형압력이 높을수록 두부조직의 강도도 증가하였다. 각 제조조건에 따른 응력완화 실험에서는 초기응력 값이 파손강도의 결과와 일치하는 경향을 보였고 탄성성분과 점성성분 또한 파손강도의 변화와 같은 경향을 나타내었다. 응력완화실험을 통하여 측정한 두부조직의 물성을 수학적 모델에 적용하여 조직의 변화를 수치화하여 설명하였다.