• 제목/요약/키워드: glow lamp

검색결과 21건 처리시간 0.02초

Ne, Ar, Kr 혼합가스에서의 유도결합형 플라즈마 방전특성 (Inductively Coupled Plasma discharge characteristic of Ne, Ar, Kr mixed gas)

  • 허인성;최용성;이종찬;정영일;박대희
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2004년도 학술대회 논문집
    • /
    • pp.9-12
    • /
    • 2004
  • Recently, the environmental problem has received considerable attention. so, many lamps have been developing for environmental requirement and energy efficiency. also, at glow discharge lamp researchers try to reduce energy spending that is power saving lamp. this kind requirement agree with strong points of electrodeless fluorescent lamp has received to now lighting sauce. At low pressure as mTorr I.C.P make high density plasma easily, is good to maintain discharge, has high ionization and does not have failing lighting and losing ability of electron radiation by oxidation and volatilization of electrodes, because this tape does not have electrodes This point of I.C.P can use at electrodeless fluorescent lamp in this study ICP display elements and Ar, Ne, Kr are researched for optical characteristic. each gas is looked into optical characteristic, also mixed gases is experiment for optical characteristic.

  • PDF

제논 혼합가스를 이용한 고효율 면광원과 국부적 밝기 제어 방식 (High Luminous Efficiency Flat Light Source with Xe mixture Gas Discharge and Areal Brightness Control Method)

  • 정재철;서인우;오병주;황기웅
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2009년도 추계학술대회 논문집
    • /
    • pp.153-157
    • /
    • 2009
  • A Highly efficient Mercury-free Flat Fluorescent Lamp (MFFL) with dielectric barrier Xe gas discharge was developed for an alternative of conventional line-type Cold Cathode Fluorescent Lamps (CCFLs) which shows a wide voltage margin and a stable discharge operation for diffuse glow discharge with an application of a auxiliary electrode. Electro-optic characteristics of the MFFL were examined through the changes in ambient temperature, total pressure and Xe partial pressure. the single cell is expanded into a multi-structured configuration to realize a large sized lamp by a simple repetition of the single cells, and a new driving scheme is proposed for an adaptive brightness control using dual auxiliary electrodes and bi-polar drive scheme. In addition, interesting application of this ultra high luminance flat lamp by the optimization of the gas condition and the pattern of the rear phosphor layer is suggested as a good alternative of daylight lamp source

  • PDF

DBD 전극구조에서의 He 가스 글로우방전 특성연구 (The Study on the Properties of He Glow discharge in a Dielectric Barrier Discharge (DBD) Model)

  • 소순열
    • 전기학회논문지P
    • /
    • 제67권4호
    • /
    • pp.214-220
    • /
    • 2018
  • Light sources induced by gas discharge using rare gases have been widely used in the thin film deposition, the surface modification and the polymer etching. A dielectric barrier discharge (DBD) has been developed in order to consistently emit light and control the wavelength of the emission light. However, much research on the characteristics of the movement of discharge particles is required to improve the efficiency of the light lamp and the life-time of the light apparatus in detail. In this paper, we developed a He DBD discharge simulation tool and investigated the characteristics of discharge particles which were electrons, two positive ions ($He^+$, $He_2^+$) and 5 excited particles ($He^*(1S)$, $He^*(3S)$, $He^*$, $He^{**}$, $He^{***}$). The discharge currents showed the transition from pulse mode to continuous mode with the increase of power. With the accumulated charges on the barrier walls, the discharge current was rapidly increased and caused oscillation of the discharge voltage. As the gas pressure increased, $He_2^+$ and $He^*(3S)$ became the dominant activated particles. The input power was mostly consumed by electrons and $He_2^+$ ion. And the change curve showed that power consumption by electrons increased more with gas pressure than with source voltage or frequency.

냉음극 형광램프의 광 전파 (Observation of Light-Propagation along the Tube of Cold Cathode Fluorescent Lamp)

  • 조윤희;김동준;김정현;한상호;조광섭
    • 한국진공학회지
    • /
    • 제20권2호
    • /
    • pp.114-126
    • /
    • 2011
  • 냉음극 형광램프의 길이 방향의 발광에 의한 광의 전파를 관측하였다. 직류 및 교류 전압을 인가하여 램프 길이의 일정한 간격으로 광 신호를 측정하였다. 직류 전원을 맥류로 변조한 전압을 인가하여 광 신호를 관측한 결과 교류 전원의 광 신호와 마찬가지로 램프 길이 방향으로 발광의 전파가 분명히 나타난다. 이들 광 신호로부터 램프의 발광이 고전압부에서 접지부로 전파한다는 것을 보여준다. 광 신호의 전파는 타운젠드 방전 전후로 두 가지의 형태로 나타난다. 저 전류 영역에서는 광 신호가 감쇄하여 전파되며, 전파 속도는 약 $10^4{\sim}10^5m/s$이다. 정상 글로우 방전에서는 광 신호의 감쇄 없이 전파 속도는 약 $10^5{\sim}10^6m/s$이다.

LCD-백라이트용 형광램프의 수은량 (Mercury Quantity in a Fluorescent Lamp for a Backlight of LCD-TVs)

  • 봉재환;김윤중;황하청;김동준;정종문;김정현;구제환;조광섭
    • 한국진공학회지
    • /
    • 제17권6호
    • /
    • pp.495-500
    • /
    • 2008
  • Ne+Ar의 혼합 기체와 수은이 주입된 세관 형광램프에서 플라즈마의 형성에 필요한 기체 수은의 량을 계산하였다. 전자($kT_e{\sim}1\;eV$)와 중성 원자(Ne, Ar, Hg)들과의 충돌에 의한 각 원자들의 이온화를 계산하여, 양광주 플라즈마의 밀도($n_o{\sim}10^{17}m^{-3}$)를 생성하는 조건으로부터 기체 수은 원자의 밀도 $3.43{\times}10^{22}m^{-3}$을 얻었다. $32{\sim}42$ 인치 LCD-TV용 액정표시장치에 사용되는 직경이 4 mm인 형광램프의 혼합 기체 Ne(95%)+Ar(5%) 50 Torr에 대하여, 글로우 방전에 필요한 기체 수은의 량은 $0.02{\sim}0.08\;mg$으로 계산되었다.

녹색발광 Zn2SiO4:Mn2+ 형광체가 코팅된 엑시머 램프의 제작 및 특성 (Fabrication and Property of Excimer Lamp Coated with Green-emitting Zn2SiO4:Mn2+ Phosphor Film)

  • 강부식;정현지;정용석;손세모;김종수
    • 반도체디스플레이기술학회지
    • /
    • 제21권4호
    • /
    • pp.106-109
    • /
    • 2022
  • The green-emitting Zn2SiO4:Mn2+ phosphor film was evaluated in a xenon excimer lamp. The phosphor film with 2 ㎛ thick was formed of monolithic structure on the inner side of quartz through a long-time annealing process of coated ZnO solution doped with Mn2+ ion and SiO2 of quartz tube. The coated quartz was filled with 100 torr of xenon gas, and simultaneously both sides was melt and sealed. The xenon-field quartz tube was discharge by applying the voltage of 15 kV with a frequency of 26 kHz, and emitted the glow with dominant peak at 172 nm. The vacuum ultraviolet excited the inner-side coated Zn2SiO4:Mn2+ phosphor film, which emitted the pure and strong green light.

형광램프용 전자식 스타터의 개발 (Development of an Electronic Starter for Fluorescent Lamps)

  • 정영춘;곽재영;여인선
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1996년도 추계학술발표회논문집
    • /
    • pp.49-52
    • /
    • 1996
  • This paper reports the development of an electronic starter for fluorescent lamps, which is so smartly designed that can be used directly in existing installations. The key point of the design lies in the protection of lamp filaments by sufficient preheating and at the same time in the control of time constant for start-up circuit. The starter is consisted of three system parts: a rectifier pact, a switching part. and a gate control part. The characteristics of the developed electronic starter is compared with those of a conventional glow starter. As a result, blackening of lamps is almost reduced due to the stable and idealized start-up characteristics. And, furthermore, it is shown that its slaving time is shortened at about half the level of the conventional one and the starting power is also reduced.

  • PDF

New Light Fiber BLU System for Large LCD Display

  • Chung, Man-Young;Park, Tong-Soo
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1398-1400
    • /
    • 2002
  • A new PLF-BLU (Plastic Light Fiber-Back Light Unit) using side glowing light fiber rods array for the 42" LCD TV display has been evelopedd. The light fibers were 14mm in diameter and 50cm long pure transparent acrylic rods of 1.49 refractive index. Fine seratees were made on the flat side of rod. extremely bright incandscent light from lamp fed into the fiber si scattered at scratches then emerges through the surface of rod. A typical PLF-BLU system consists of 24 PLFs produced side glow of brightness of 4,500cd/㎡ to 6,500cd/㎡. New PLF-BLU is proved to be a BLU of rigid, bright, no heat generation, and low power consumption, hence a prospective BLU system for very and/or ultra large size TVs. A new LED-PLF-BLU system considered to be a revolutionary to break-through of the BLU technologies has also been developed, and is decribed briefly.

  • PDF

녹색 발광의 $CaZrO_3:\;HO_{3+}$ 축광성 형광체의 합성 및 발광 특성 (Synthesis and luminescent properties of a new green $CaZrO_3:\;HO_{3+}$ long persistent phosphors)

  • 박병석;최종건
    • 한국결정성장학회지
    • /
    • 제18권3호
    • /
    • pp.109-114
    • /
    • 2008
  • 새로운 녹색의 $CaZrO_3$ : $HO_{3+}$ 축광성 형광체를 고온의 약한 환원 분위기에서 전통적인 고상 반응법으로 합성하였다. $CaZrO_3$ : $HO_{3+}$ 축광성 형광체에 첨가 된 융제 $H_3BO_3$의 역할과 부활제의 적정농도에 대하여 연구하였으며, 합성한 축광성 형광체의 형광 분석 및 광 발광 분석을 행하였다. 고온의 질소 분위기에서 합성한 $CaZrO_3$ : $HO_{3+}$ 축광성 형광체는 546nm의 발광 피크가 나타남을 확인 하였으며, 장잔광 스펙트럼 또한 폭이 좁은 546 nm의 발광 피크가 나타남에 따라 순수한 녹색의 발광색을 띄고 있음을 확인하였다 녹색의 $CaZrO_3$ : $HO_{3+}$ 축광성 형광체의 발광 지속시간은 254 nm UV lamp로 여기 시킨 후 어두운 곳에서 5시간 이상 발광이 유지되었다. 발광 피크는 $HO_{3+}$ 이온의 $^5F_4$, $^5S_2{\to}^5I_3$ 전이에 의한 것이며, 잔광 특성은 $CaZrO_3$ 격자 내에 trap center가 생성됨 의하여 발생되는 것으로 판단된다.

건조(乾燥) 고추 저장(貯藏) 중(中)의 변색(變色)에 관(關)한 연구(硏究) (Color and Carotenoid Changes During Storage of Dried Red Pepper)

  • 김동연;이종욱
    • 한국식품과학회지
    • /
    • 제12권1호
    • /
    • pp.53-58
    • /
    • 1980
  • 건조(乾燥) 고추의 변색(變色) 요인(要因)을 구명(究明)키 위(爲)하여 수분(水分) 활성(活性), 광선(光線), 산소(酸素) 및 온도(溫度)를 달리 했을 때의 capsanthin의 소장(消長)과 또 몇가지 구장재(句裝材)로 가루, 원형(原形) 및 원형(原形) 압축(壓縮) 상태(狀態)로 포장(包裝)하여 capsanthin 양(量)과 색도(色度)에 관한 시험(試驗) 결과(結果)는 다음과 같다. 1. 고추의 capsanthin에 미치는 상온하(常溫下)($25^{\circ}C$)의 한계(限界) 수분(水分) 활성(活性)은 0.75이었다. 2. Capsanthin의 감소(減少)는 적외선(赤外線), 백열등(白熱燈) 하(下)에서 보다 자외선(紫外線) 이 심했다. 3. Capsanthin의 질산(窒素) 가스 내(內)에서는 거의 감소(減少)가 없었고 공기(空氣) 내(內)에서 심함 감소(減少)가 있는 것으로 보아 고추의 변색(變色)은 주(主)로 산화(酸化) 작용(作用)에 기인(基因)하는 것으로 본다. 4. $9{\sim}11$월(月)의 상온(常溫)과 저온(低溫) 저장(貯藏) 시(時)에는 포장(包裝)된 고추의 capsanthin의 변화(變化)는 별로 차이(差異)가 없었다. 5. 형태(形態) 별(別) 3개월(個月) 저장(貯藏) 시험(試驗) 결과(結果)는 capsanthin 양(量)과 색도(色度)는 가루 저장(貯藏)이 가장 높았다. 6. 포장(包裝) 재료(材料) 별(別) 밀봉(密封) 저장(貯藏) 시험(試驗) 결과(結果)는 투수성(透水性)과 투기성(透氣性)이 없는 재료(材料)가 P.E.보다 capsanthin 양(量)과 색도(色度)가 높았다.

  • PDF