• 청정기술
• /
• 제23권2호
• /
• pp.181-187
• /
• 2017

반도체 및 디스플레이 산업에서 배출되는 과불화합물은 연소, 열, 플라즈마, 촉매 등의 다양한 방법이 적용된 스크러버에 의해 분해 과정을 거친 후 배출되나, 운영 스크러버의 대부분이 과도한 에너지의 사용, 낮은 저감 효율을 보임으로써 이러한 단점의 극복이 요구된다. 압력순환흡착법과 다공성 매체 연소법의 두 가지 기술이 연계된 새로운 형태의 과불화합물 저감 스크러버를 개발하고 특성을 알아보았다. 분해 대상인 $CF_4$의 흡착비와 손실계수는 흡착 컬럼의 입구와 출구에서 농도 측정을 통해 계산하였으며, 연소기의 입구와 출구의 유량과 농도 측정을 통해 처리 효율을 계산하였다. 기존 스크러버와의 에너지 사용량 및 처리효율 비교를 위하여 다양한 유량에 대한 성능 평가가 진행되었다. 1412 ppm, 204 LPM의 $CF_4$가 유입된 흡착 컬럼에서의 흡착비는 1.65였으며, 유입되는 $CF_4$의 손실 계수는 8.2%였다. 이때 연소기로 유입되는 $CF_4$의 유량과 농도는 각각 91 LPM과 2335 ppm이었으며, $CF_4$ 19 LPM, $O_2$ 40 LPM을 사용한 연소 반응시 약 96%의 저감 효율을 나타내었다. 상용 스크러버와의 동일 운전 조건에서의 다공성 매체 연소에서의 $CF_4$ 저감 효율과 전체 에너지 사용 효율 비교시 각각 16%, 41% 이상의 저감 효율 상승과 에너지 절감 효과를 보였다.

• 한국항만경제학회지
• /
• 제27권4호
• /
• pp.37-49
• /
• 2011

글로벌 물류기업의 정보시스템은 성과분석을 하여 효율성 증진을 위한 실증적 근거를 기반으로 세부 운영방법을 위한 전략이 요구된다. 본 연구는 물류기업의 핵심역량으로 물류정보서비스를 강화하므로 물류정보시스템의 운영과 정보서비스 등급을 연구대상으로 선정하였다. Logistics Quarterly and Armstrong Association로부터 글로벌물류기업 중 27개 글로벌물류기업을 선정한 후, 이들 기업의 2007년, 2008년, 2009년 까지 매출액, 정보시스템 등급과 정보시스템 운영수, 종업원 수를 투입요소와 산출요소를 이용하여 효율성 분석을 하였다. 효율성의 동태적 변동은 SBM을 이용하였다. 실증분석결과 2007년에 가장 효율적인 DMU는 DB Schenker Logistics.,와 Schneider Log istics, Inc.로 나타났다. 2008년에 가장 효율적인 DMU는 DHL Supply Chain & Global Forwarding., DB Schenker Logistics., Panalpina World Tranport(Holding) Ltd., C.H. Robinson Worldwide, Inc., Hub Group, Inc./Unyson Logistics.로 나타났다. 2009년에 효율적인 DMU는 DHL Supply Chain & Global Forwarding., DB Schenker Logistics., Panalpina World Tranport(Holding) Ltd., C.H. Robinson Worldwide, Inc., Hub Group, Inc./Unyson Logistics., Transplace.로 나타났다. 결과적으로 2007년, 2008년, 2009년 연도별 효율성이 점차로 감소되고 있으며, 비효율성이 원인으로 지목되는 규모의 효율성 개수가 점차로 감소하고 있음을 알 수 있다.

• 에너지협의회보
• /
• 통권17호
• /
• pp.4-10
• /
• 1990

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.85-107
• /
• 2007

In this paper, we develop a fairly large number of sets of global semiparametric sufficient efficiency conditions under various generalized (${\theta},{\eta},{\rho}$)-V-invexity assumptions for a multiobjective fractional programming problem involving arbitrary norms.

• 대기
• /
• 제25권1호
• /
• pp.169-177
• /
• 2015

Vertical distribution of particle mass concentrations was estimated from 8-year elastic-backscatter lidar and sky radiometer data, and from ground-level PM10 concentrations measured in Seoul. Lidar ratio and mass extinction efficiency were determined from aerosol optical depth (AOD) and ground-level PM10 concentrations, which were used as constraints to estimate particle mass concentration. The mean lidar ratio (with standard deviation) and mass extinction efficiency for the entire 8-year study period were $60.44{\pm}23.17$ sr and $3.69{\pm}3.00m^2g^{-1}$, respectively. The lidar ratio did not vary significantly with the ${\AA}ngstr{\ddot{o}}m$ exponent (less than ${\pm}10%$); however, the mass extinction efficiency decreases to $1.82{\pm}1.67m^2g^{-1}$ (51% less than the mean value) when the ${\AA}ngstr{\ddot{o}}m$ exponent is less than 0.5. This result implies that the particle mass concentration from lidar measurements can be underestimated for dust events. Seasonal variation of the particle mass concentration estimated from lidar measurements for the boundary layer, was quite different from ground-level PM10 measurements. This can be attributable to an inhomogeneous vertical distribution of aerosol in the boundary layer.

• 사물인터넷융복합논문지
• /
• 제8권5호
• /
• pp.27-31
• /
• 2022

최근에 많은 글로벌 기업들이 글로벌 공급망 구축과 구축된 글로벌 공급망을 기반으로 공유경제를 실현하기 위한 노력을 수행하고 있다. 공유경제를 실현하기 위한 다양한 방법이 있으나 그 중에서도 공유물류시스템를 통한 기업의 공유경제 특히 물류효율화 추진에 많은 노력을 수행하고 있다. 기업의 공유경제를 실현하기 위해서 기업에서는 ICT 기반의 공유물류시스템 적용방안 모색이 요구되고 있다. 이에 본 연구는 물류기업체에서 ICT 기반의 공유경제의 효율을 높이기 위한 물류기업체의 물류효율화 방안을 제시하였다. 이를 위해서 ICT 기반의 공유물류시스템 적용을 위해 국내 공유물류시스템 현황 및 운영에 관해 제시하고, 공유경제 활성화에 따른 공유물류기반 운영 플랫폼 및 ICT 연계를 통한 공유물류서비스 기대효과를 제시하였다. ICT 기반의 공유물류의 효율성 방안 제시를 통한 글로벌 공급망에서 요구되는 다양한 요구를 만족할 수 있을 것으로 판단된다.

• Steel and Composite Structures
• /
• 제30권4호
• /
• pp.393-403
• /
• 2019

Cold-formed steel (CFS) has a great potential to meet the global challenge of fast-track and durable construction. CFS members undergo large buckling instabilities due to their small wall thickness. CFS beams with corrugated webs have shown great resistance towards web buckling under flexure, when compared to the conventional I-sections. However, the magnitude of global imperfections significantly affects the performance of CFS members. This paper presents the first attempt made to experimentally study the effect of global imperfections on the structural efficiency of various strengthening schemes implemented in CFS beams with corrugated webs. Different strengthening schemes were adopted for two types of beams, one with large global imperfections and the other with small imperfections. Strength and stiffness characteristics of the beams were used to evaluate the structural efficiency of the various strengthening schemes adopted. Six tests were performed with simply supported end conditions, under four-point loading conditions. The load vs. mid-span displacement response, failure loads and modes of failure of the test specimens were investigated. The test results would compensate the lack of experimental data in this area of research and would help in developing numerical models for extensive studies for the development of necessary guidelines on the same. Strengthening schemes assisted in enhancing the member performance significantly, both in terms of strength and stiffness. Hence, providing an economic and time saving solution to such practical structural engineering problems.

• Asia Pacific Journal of Business Review
• /
• 제3권1호
• /
• pp.19-38
• /
• 2018

The energy intensity of Nepal is economically not worthy, lacks eco-friendly and importantly not sustainable, and almost four times the average global energy intensity. Considerable efforts have been exercised to reduce the energy gap yet, it is still much to achieve. Nation priority on energy sector was envisaged with promulgation of investment friendly rules and law in hydropower and renewable technology even though, could not harness the sufficient energy. In amid of this acute energy crisis, the government launched the Nepal Energy Efficiency Programme (NEEP) with technical assistance from German International Cooperation (GIZ). Energy Efficiency (EE) practice is the most cost-effective method to reduce the supply and demand gap, reduce on greenhouse gases and pollution, and deter on import of petroleum products which finally improves on trade imbalance. This paper had proposed a framework of energy management team to promote energy efficient technologies in residential consumer. The energy management teams study the past records of energy use pattern of consumers and suggest appropriate technology for energy saving options. The paper provides some reviews of energy efficiency initiatives undertaken by the concern regulatory body which highlights the current status. The comprehensive knowledge acquired through exploratory research is implemented in this paper to identify the various barriers that domestic consumer is experiencing towards the active participation in energy efficiency program launched by the Government of Nepal.

• International Journal of Advanced Culture Technology
• /
• 제12권2호
• /
• pp.167-179
• /
• 2024

This study addresses the challenge of objectively evaluating the performance of early-stage startups amidst limited information and uncertainty. Focusing on companies selected by TIPS, a leading private sector-driven startup support policy in Korea, the research develops a new indicator to assess technological efficiency. By analyzing various input and output variables collected from Crunchbase and KIND (Korea Investor's Network for Disclosure System) databases, including technology use metrics, patents, and Crunchbase rankings, the study derives technological efficiency for TIPS-selected startups. A prediction model is then developed utilizing machine learning techniques such as Random Forest and boosting (XGBoost) to classify startups into efficiency percentiles (10th, 30th, and 50th). The results indicate that prediction accuracy improves with higher percentiles based on the technical efficiency index, providing valuable insights for evaluating and predicting startup performance in early markets characterized by information scarcity and uncertainty. Future research directions should focus on assessing growth potential and sustainability using the developed classification and prediction models, aiding investors in making data-driven investment decisions and contributing to the development of the early startup ecosystem.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.77-84
• /
• 2003

Virtual work in multibody systems is frequently expressed as the inner product of the virtual displacement and the resultant force at the centroid. But provided that the resultant force is converted into the equipollent forces there is no restriction on where the analysis reference point is placed. There are basically three candidate points : the centroid, joint point and the instant global origin. The traditional fully recursive formulation uses the centroid, but the present work verifies that the instant global origin always shows better efficiency (e.g. 86% CPU time of the centroid for quarter car model) and joint point shows the efficiency between that of the centroid and the instant global origin. A discussion on how important it is to define the analysis reference point properly in a fully recursive formulation is also presented.