• 한국기후변화학회지
• /
• 제4권4호
• /
• pp.409-416
• /
• 2013

최근 기후변화로 인한 인류의 피해가 나날이 늘고 있지만, 개인의 환경의식을 높일 수 있는 환경교육에 대한 공급은 수요를 따라 가지 못하고 있다. 따라서 본 연구는 설문조사를 통해 향후 환경분야 교재 개발에 필요한 기초자료를 제공하는데 그 목적이 있다. 이를 위해 서울과 경기 지역에서 총 139명의 학생을 대상으로 설문조사를 통해 과학기술과 기후변화, 신재생에너지에 관한 인식을 물어봤다. 가장 먼저 기초과학, 건강 및 의학, 우주항공, 생명과학, 전기전자, 정보통신, 에너지 및 자원, 환경 등 8가지 과학기술 분야 각각에 대한 관심도를 물었다. 이 결과, '건강 및 의학'에 대한 관심도가 49.6%로 가장 높았고, '환경'이 46.8%로 뒤를 이었다. 또한, "매우 관심 있다"고 응답한 학생에게 그 이유를 물어본 결과, '환경' 분야에선 '삶의 질 향상과 직접 연관되므로'라는 응답이 53.8%로, '개인적인 관심 때문'(38.5%)보다 많아, 다른 분야에서 '개인적인 관심 때문'이란 많은 것과 차이를 보였다. 기후변화와 관련해 대다수 중, 고등학생은 해마다 계절의 변화에 '차이가 있다'고 응답(90.6%)했고, 본인 혹은 지인들이 기후변화로 인한 피해를 경험한 경우는 18.0%로 조사됐다. 또한, 청소년들은 일생 동안 기후변화로 인해 자연재해를 '경험할 것'이란 응답이 94.2%로 매우 많아, 기후변화는 이미 일상적인 문제로 받아들여지고 있었다. 또한, 응답자들은 기후변화 해결을 위해 정부가 '전국민적 에너지 절약 운동'을 가장 우선적으로 추진해야 한다(30.9%)는 견해가 가장 많았고, '태양광, 풍력 등 신재생에너지 보급 확대'(24.5%), '폭염, 폭설, 홍수 등 재난에 대비한 기후변화 적응 대책시행'(22.3%), '온실가스 감축을 위한 배출권 거래제, 탄소세 등 제도 도입'(20.9%), '기타'(1.4%) 순으로 응답됐다. 신재생에너지의 뜻을 인지한 경우는 69.1%로 비인지(18.7%)보다 많았다. 그러나 '매우 잘 알고 있었다'는 18.7%로 적어, 현재는 신재생에너지에 대해 막연하게 아는 학생이 많은 것으로 파악됐다.

• 헤리티지:역사와 과학
• /
• 제44권1호
• /
• pp.52-71
• /
• 2011

본 연구는 국립공원 계룡산을 배경으로 설정된 갑사구곡과 용산구곡에 대한 정확한 위치와 구곡명을 확정하는 등 실체를 밝히고 양 구곡원림의 특성을 비교 고찰할 목적으로 시도되었다. 문헌고찰 및 주민 인터뷰 그리고 현장 정밀조사 결과, 갑사구곡은 용유소(龍遊沼)-이일천(二一川)-백룡강(白龍岡)-달문택(達門澤)-금계암(金鷄?)-명월담(明月潭)-계명암(鷄鳴巖)-용문폭(龍門瀑)-수정봉(水晶峰)으로 설정된 것으로 판단하였으며 용산구곡은 심용문(尋龍門)-은룡담(隱龍潭)-와룡강(臥龍剛)-유룡대(遊龍臺)-황룡암(黃龍岩)-현룡소(見龍沼)-운룡택(雲龍澤)-비룡추(飛龍湫)-신룡연(神龍淵)의 9개 경물로 구성된 것으로 최종 확인하였다. 갑사구곡과 용산구곡은 조선 말기 벽수 윤덕영(1927년)과 취음 권중면(1932년)이 각각 5년의 시차를 두고 계룡산 계곡에 조영한 구곡원림(九曲園林)으로, 전자는 개인의 풍류취향을 반영하여 주역(周易)의 이치를 자연의 아름다움과 함께 완상(玩賞) 하고자 설정했던 반면 후자는 한일합방의 비보에 관직을 계룡산에 은거하며 용(龍)의 일생을 비유해 해방의 그날을 표현하고자 했던 구곡원림으로 판단된다. 이에 따라 설정 주체의 국가관에서부터 극단적인 대비를 보인다. 갑사구곡은 바위를 사각으로 편평히 음각한 상태에서 각자가 이루어졌고 행서체로 필체가 뚜렷하여 새김이 깊어, 1곡 용유소를 제외하고 마멸이 적은 반면 용산구곡은 고어체(古語體)와 초서 이자체(異字體)로 이루어져 있으나 새김이 얕고 마멸과 훼손이 심한 편이다. 갑사구곡은 5곡 인근 간성장(艮成莊)을 중심으로 구곡이 설정된 반면 용산구곡은 5곡 황룡암을 중심으로 설정된 것으로 판단된다. 한편 구곡 설정의 중요 모티프는 갑사구곡의 경우, '용과 닭'을 주제로 계룡산의 장소정체성을 부각시키려 한 것으로 추론되며 아울러 팔괘의 간(艮)을 중심으로 한 주역의 원리를 표상화하고자 한 것으로 보이나 이에 대해서는 심화연구가 필요하다. 한편 용산구곡은 '용'을 주요 모티프 및 테마로 설정하여, 상신리 계곡을 용이 태어나서부터 승천하기까지의 이야기를 자연에 연계시켜 구현함으로써 구곡 설정자의 의지와 염원을 자연과 소통하는 방식으로 이루어지고 있다. 이는 용의 일생을 통해 지금의 기울은 국운을 일으키고 나라를 되찾아가는 희망을 표현하고자 했던 것으로 추정된다.

• 한국자원식물학회지
• /
• 제34권4호
• /
• pp.287-296
• /
• 2021

최근 전 세계적으로 지구온난화가 가속되면서 작물의 생산에 극심한 피해가 야기되는바 극한의 고온 스트레스에 따른 참당귀의 생육특성 및 지표성분을 확인하고 효율적인 참당귀의 재배를 위한 기초자료를 제공하고자 하였다. 2018년, 2019년의 기상관측데이터를 활용하여 실험온도(Control, 28℃, 34℃, 40℃)를 설정하였다. 그리고 식물생장상을 통해 실험온도를 처리하여 실험포지에서 이식 및 생장을 거쳐 생육특성 및 유용성분함량을 분석하였다. 실험이 수행되어진 실험포지는 평균 대기온도 19.38℃, 평균 토양온도 21.34℃, 평균대기습도 81.31 %, 평균 토양습도 0.18 m³/m³, 평균 일사량 162.05 W/m²로 관측되었으며, 토양의 이화학적 특성은 사질식양토에 유기물함량 2.66 %, 유효인산 868.52 mg/kg, 전질소 0.14%, pH 6.65, 칼륨, 칼슘, 마그네슘, 나트륨은 각각 0.95, 7.38, 1.46, 0.15 cmol⁺/kg로 분석되었다. 그리고 활착율(85 %)과 전체 높이(38.66 cm), 생중량(41.3 g), 건중량(14.24 g) 등과 같은 대부분의 생육특성은 대조구 대비 28℃ 실험구에서 가장 높은 생육을 보였다. 하지만 유용성분함량의 유의성은 확인되지 않았으나 대조구 대비 34℃ 실험구에서 가장 높은 값을 나타냈다. 이러한 결과는 고온의 스트레스로 식물체 조직의 노화 및 광합성량 감소, 생장지연 등과 같은 생육장애 요인에 의해 실험구별 생육의 차이가 발생했으며, 유용성분의 함량 또한 실험구별 생육장애에 의해 동화산물의 축적이 저조해져 발생된 현상이라 판단된다.

• 한국수자원학회논문집
• /
• 제54권spc1호
• /
• pp.1107-1118
• /
• 2021

지구온난화로 인해 발생한 기후변화는 한반도의 홍수, 가뭄 등의 발생빈도를 증가시켰으며, 이로 인해 인적, 물적 피해가 증가한 것으로 나타났다. 수재해 대비 및 대응을 위해서는 국가 차원의 수자원 관리 계획 수립이 필요하며, 유역 단위 수자원 관리를 위해서는 장기간 관측된 유량 자료를 이용하여 도출된 유량지속곡선이 필요하다. 전통적으로 수자원 분야에서 유량지속곡선을 도출하기 위하여 물리적 기반의 강우-유출 모형이 많이 사용되고 있으며, 최근에는 데이터 기반의 딥러닝 기법을 이용한 유출량 예측 기법에 관한 연구가 진행된 바 있다. 물리적 기반의 모형은 수문학적으로 신뢰도 높은 결과를 도출할 수 있으나, 사용자의 높은 이해도가 요구되며, 모형 구동 시간이 오래 걸릴 수 있는 단점이 있다. 데이터 기반의 딥러닝 기법의 경우 입력 자료가 간단하며, 모형 구동 시간이 비교적 짧으나 입력 및 출력자료 간의 관계가 블랙박스로 처리되어 수리·수문학적 특성을 반영할 수 없는 단점이 있다. 본 연구에서는 물리적 기반 모형으로 국내외에서 적용성이 검증된 Soil Water Assessment Tool (SWAT)의 매개변수 보정(Calibration)을 통해 장기간의 결측치 없는 데이터를 산출하고, 이를 데이터 기반 딥러닝 기법인 Long Short-term Memory (LSTM)의 훈련(Training) 데이터로 활용하였다. 시계열 데이터 분석 결과 검·보정 전체 기간('07-'18) 동안 Nash-Sutcliffe Efficiency (NSE)와 적합도 비교를 위한 결정계수는 각각 0.04, 0.03 높게 도출되어 모형에서 도출된 SWAT의 결과가 LSTM보다 전반적으로 우수한 것으로 나타났다. 또한, 모형에서 도출된 연도별 시계열 자료를 내림차순하여 산정된 유량지속곡선과 관측유량 기반의 유량지속곡선과 비교한 결과 NSE는 SWAT과 LSTM 각각 0.95, 0.91로 나타났으며, 결정계수는 0.96, 0.92로 두 모형 모두 우수한 성능을 보였다. LSTM 모형의 경우 저유량 부분 모의의 정확도 개선이 필요하나, 방대한 입력 자료로 인해 모형 구축 및 구동 시간이 오래 걸리는 대유역과 입력 자료가 부족한 미계측 유역의 유량지속곡선 산정 등에 활용성이 높을 것으로 판단된다.

• 지능정보연구
• /
• 제29권1호
• /
• pp.79-105
• /
• 2023

지구온난화와 기후변화 등의 유례없는 기상이변으로 전 세계 곳곳이 극심한 몸살을 앓고 있으며, 경제적 손실 또한 눈덩이처럼 불어나고 있다. 이러한 문제를 해결하기 위해 2016년 '파리기후변화협정(The Paris Agreement)'이 체결되어 지구의 평균온도 상승을 1.5℃ 아래로 유지하기 위한 정부간 협의체가 결성되었으며, 우리나라도 2050년 탄소중립을 선언함으로써 기후재앙을 막기 위한 노력을 진행하고 있다. 특히, 온실가스 배출로 인한 기온상승은 수출 의존도가 높은 우리나라 경제는 물론 환경과 사회 전반에 부정적인 영향을 미칠 것으로 예상된다. 또한, 교통수단의 다변화가 가속화되면서 수단선택의 변화도 크게 증가하고 있는 가운데 저성장 시대의 개발 패러다임이 도시재생으로 변화함에 따라, 노선의 수요 감소, 선형 개량, 도심 철도의 외곽 이설 등에 영향을 받아 증가하고 있는 철도 유휴부지 활용에 대한 관심이 높아지고 있다. 한편, 철도 유휴부지를 활용한 태양광발전은 '재생에너지 3020'의 태양광발전 목표를 일부 달성하면서도, 입지를 둘러싼 환경훼손과 주민 수용성 문제에서 자유로워질 수 있는 장점에도 불구하고, 설비실태나 설비계획에 있어 미진한 상황이다. 이에, 본 연구에서는 국가철도공단과 재생에너지클라우드플랫폼에서 제공하는 데이터를 활용하여 태양광발전 설비 설치가 가능한 적합 유휴지를 발굴 및 분석하는 알고리즘을 개발하고, 사용자가 원하는 조건을 고려한 잠재적인 적합 지역을 탐색 및 도출함으로써, 개발 초기 설비나 확충 등에 소요되는 막대한 비용을 절약할 수 있는 방안을 마련하고자 하였다. 본 연구는 다양한 군집분석을 활용하여 철도 유휴부지에 태양광발전 설치입지를 도출할 수 있는 최적의 알고리즘을 개발하고, 면적, 설치용량, 발전량, 예상수익 등이 모두 높은 '태양광발전 설치 적극권장 지역' 202곳을 도출하였다. 이를 바탕으로 경제와 환경을 동시에 고려한 관점에서 의사결정자의 합리적인 판단을 도울 수 있을 것으로 기대한다.

• 항공우주정책ㆍ법학회지
• /
• 제18권
• /
• pp.9-39
• /
• 2003

프로펠러여객기 운항시대에 만들어졌던 국제항공운송인의 민사책임관계를 규정한 1992년의 바르샤바조약은 1955년의 헤이그 개정의정서, 1961년의 과다라하라조약, 1971년의 과테말라의정서 및 1975년의 몬트리올 제1, 제2, 제3및 제4의 정서 등 한개의 조약과 여섯 개의 의정서 등에 의하여 여러 차례 개정이 되었고 보완되면서 70여 년간 전세계를 지배하여 왔지만 오늘날 초음속(마하)으로 나르고 있는 제트여객기 운항시대에 적합하지 않아 "바르샤바조약체제" 상의 문제점이 많이 제기되어 왔다. 특히 시대에 뒤떨어진 "바르샤바조약체제" 는 2개의 조약과 여섯 개의 의정서로 매우 복잡하게 구성되어 있었으며 항공기사고로 인한 국제항공운송인의 손해배상사건에 있어 배상한도액이 유한책임으로 규정되어 있어 항상 가해자인 항공사와 피해자인 여객들간에 분쟁(소송 등)이 끊이지 않고 있으므로 이를 어느정도 해결하기 위하여 UN산하 ICAO에서는 상기 여러 개 조약과 의정서를 하나의 조약으로 통합(integration)하여 단순화시키고 현대화(modernization)시키기 위하여 20여 년간의 작업 끝에 1999년 5월에 몬트리올에서 새로운 국제항공운송인의 민사책임에 관한 조약(몬트리올 조약)을 제정하였다. "바르샤바조약체제" 를 근본적으로 개혁한 몬트리올 조약은 71개국과 유럽통합지역기구가 서명하였으며 미국을 비롯하여 33개국이 비준하여 2003년 11월 3일부터 전세계적으로 발효되었음으로 이 조약은 앞으로 전세계의 항공운소업계를 지배하게 되리라고 본다. 본 논문에서는 몬트리올 조약의 성립경위와 주요내용(국제항공여객운송인의 손해배상책임: (1)총설, (2)조약의 명칭, (3)조약의 전문, (4)국제항공여객에 대한 책임원칙과 배상액((ㄱ)국제항공여객의 사상에 대한 배상, (ㄴ)국제항공여객의 연착에 대한 배상), (5)손해배상 한도액의 자동조정, (6)손해배상금의 일부전도, (7)손해배상청구소송의 제기관계, (8)국제항공여객의 주거지에서의 재판관할관계, (9)항공계약운송인과 항공실제운송인과의 관계, (10)항공보험)을 요약하여 간략하게 설명하였다. 1999년 몬트리올 조약의 핵심사항은 국제항공운송인의 손해배상책임에 관하여 무한책임을 원칙으로 하되 100,000 SDR까지는 무과실책임주의를 채택하였고 이 금액을 초과하는 부분에 대하여서는 과실추정책임주의를 채택하였음으로 "2단계의 책임제도" 를 도입한 점과 항공기사고로 인한 피해자(여객)는 주소지의 관할법원에 가해자(항공사)를 상대로 손해배상청구소송을 제기할 수 있는 제 5재판관할권을 새로이 도입하였다는 점이다. 현재 우리 나라는 전세계에서 항공여객수송량이 11위 권에 접어들고 있으며 항공화물수송량도 3위 권을 차지하고 있음에도 불구하고 아직도 이 조약에 서명 내지 비준을 하지 않고 있음은 문제점으로 지적될 수가 있음으로 그 해결방안으로 세계의 항공산업선진국들과 어깨를 나란히 하고 상호 협력하기 위하여 조속히 우리 나라도 이 조약에 서명하고 비준하는 것이 필요하다고 본다. 한편 우리 나라와 일본은 국내항공운송에 있어서는 국내에서 항공기사고가 발생하였을 때에 국내항공여객운송인의 민사책임을 규정한 법률이 없기 때문에 항상 항공사 측과 피해자간에 책임원인과 한계 및 손해배상액을 놓고 분규가 심화되어 가고있으며 법원에서 소송이 몇 년씩 걸리어 피해자 보호에 만전을 기 할 수가 없는 실정에 있다. 현재 이와 같은 분규의 신속한 해결을 위하여 국내항공운송약관과 민상법의 규정을 적용 내지 준용하여 처리할 수밖에 없는 실정인데 항공기사고의 특수성을 고려하여 볼 때 여러 가지 문제점이 많이 제기되고 있다. 이와 같은 문제점을 해결하기 위하여 국내항공여객운송인의 책임한계 및 손해배상액을 분명하게 정하고 재판의 공평성과 신속성을 도모하기 위하여서는 항공운송계약 당사자간의 책임관계를 명확하게 규정한 "가칭, 항공운송법" 의 국내입법이 절실히 필요하다고 본다.

• 항공우주정책ㆍ법학회지
• /
• 제28권2호
• /
• pp.223-258
• /
• 2013

필자는 우주조약의 국제법적 의미에 관하여 첫째, 우주활동의 법원칙선언조항, 둘째, 세부조약으로 발전한 조항 그리고 마지막으로 우주조약의 보완사항에 관한 최근 동향으로 분류하여 설명하였다. 1963년 12월 13일 UN총회의 '우주법선언'을 반영한 우주조약은 그 세부조약으로 1968년 구조협정, 1972년 책임협약, 1975년 등록협약을 제정하였다. 2013년 5월 기준으로 102개국이 가입하고 27개국이 서명한 우주조약은 그야말로 우주법의 '마그나 카르타'(Magna Carta) 내지는 우주의 헌법이라고 불릴 정도로 우주법의 가장 기본이 되는 원칙을 담고 있고, 특히 달과 다른 천체를 포함한 우주를 비전유원칙인 '국제공역'(res extra commercium)으로 선언함으로서 우주에 대한 영유권 문제를 종식시켰다는 점에서 큰 의미를 찾을 수 있다. 우주조약이 제정된지 반세기가 되어가는 시점에서 우주조약에서 규정하고 있는 조항 중 우주활동은 모든 국가들의 이익을 위한다는 원칙(제1조), 외기권 우주의 자유로운 탐사와 이용(제1조), 전유화금지(제2조)와 타국의 권리존중(제9조)은 조약법은 물론 모든 국가들을 구속하는 국제관습법과 '강행규범'(jus cogens)으로까지 발전된 조항이라고 할 수 있다. 특히 우주조약은 투명성과 개방성을 규범적으로 요구하고 있다. 이것은 우주활동이 '전세계적 공공 이익'(global public interest)과 관련되어 있음을 시사하고 있다. 이러한 우주에서의 '전세계적 공공이익'에 대한 원리는 국제공동체에게 '대세적 의무'(obligation erga omnes)를 부과하고 있는데, 우주를 모든 인류의 영역이라고 선언한 점, 우주에서의 협력의 의무, 우주비행사를 인류의 사절이라고 한 점, 우주활동에서 해로운 오염을 피하라고 한 점, 우주활동을 국가, 사적 실체 그리고 정부간 조직체(IGOs)로 제한한 점, 우주활동으로 인한 손해배상에 대한 절대책임원칙, 우주에서의 핵무기 및 대량파괴무기 배치 금지, 우주활동의 공개성과 투명성 그리고 국제우주제도의 보편적 적용 등이 이를 뒷받침 해주고 있다. 현재 우주조약의 해석을 두고 많은 논란이 있는 조항들이 있고 제정당시 예상 못했던 우주기술의 발달과 상업화로 인해 보충해야 할 주제도 많이 생겨나서 현재 COPUOS 내에서 1979년 달조약을 포함한 현행 우주관련 5개 조약의 지위검토를 법률소위원회에 의제로 포함시킬 것을 제의하여 1998년 제37차 법률소위원회부터 정식으로 승인받아 현재까지 논의되고 있다. 그러나 필자는 '우주법선언'의 내용들이 이미 국제관습법으로 굳어 졌으며, 이를 거의 반영한 우주조약의 상당부분 조항들이 이제는 국제관습법화 되었고, 심지어는 강행규범(jus cogens)이 된 조항들도 있다는 면에서 우주조약의 성과는 국제법상 매우 큰 의미를 지녔다고 평가하고 싶다. 앞으로 우주조약 이외에 우주관련세부조약들로도 해결하지 못하는 분야들은 COPUOS나 UN을 통하여 보완적인 결의와 선언들로 계속 반영되어야 할 것이며 만일 별도의 조약제정이 불가능하다면 적당한 시기에 우주조약을 포함하여 세부조약의 개정을 통하여 또는 추가의정서를 만들어 보완하면 좋을 것이라고 생각한다. 우주조약은 그 개념들의 모호성 때문에 수많은 학자들로부터 비난을 받아왔지만 그럼에도 불구하고 계속 존속해 왔다는 사실을 간과해서는 안 될 것이다. 현재 우주폐기물과 관련하여 "IADC 우주폐기물 경감 가이드라인", COPUOS의 "우주폐기물감축 가이드라인", 세계국제법협회(ILA)의 "우주폐기물로 인한 피해로부터 환경을 보호하기 위한 국제협약 초안" 등이 우주조약을 보완하고 있고, 분쟁해결에 관하여 세계국제법협회(ILA)가 1998년 타이페이(Taipei) 회의에서 채택한 "우주법분쟁해결에 관한 협약안"을 제시한 바 있고, 2011년 중재재판소(PCA)가 "우주활동관련 분쟁의 중재재판에 관한 선택규칙"을 제정하고, 2012년 우주활동관련 분쟁의 중재재판관을 새롭게 임명하였다는 점은 우주법이 계속 발전되어 가고 있다는 모습을 보여주고 있다. 한편 UNIDROIT(국제사법통일기구)에서는 우주자산의 구입 및 조달에 필요한 담보금 거래시 국제적으로 통일된 담보거래 규칙을 위한 "이동장비국제담보권협약에 대한 우주자산의정서"는 우주조약이 해결하지 못하고 있는 분야는 별도의 조약체결을 통하여도 보완되고 있다는 가능성을 보여주고 있는 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.