• 공업화학
• /
• 제20권5호
• /
• pp.557-560
• /
• 2009

본 연구에서는 글라스를 $100{\mu}m$ 이하의 두께로 박판화하기 위한 새로운 습식 에칭방법 및 에칭 용액을 검토하였다. $NH_4F$ 또는 $NH_4HF_2$를 주성분으로 황산 또는 질산을 첨가한 경우 에칭 용액의 불산 함유량을 저감하는 데에 효과가 있었다. 혼산 용액의 조성과 온도의 영향을 검토하였으며, 음이온계 계면활성제의 첨가는 에칭반응에 의해 생성되는 슬러지의 부착을 억제해주는 효과가 있었다. 수류 발생부를 가지는 새로운 파일럿 장비를 사용하여 상용 무알칼리 글라스와 소다라임 글라스의 에칭 실험을 실시하였다. $640{\mu}m$ 두께의 무알칼리 글라스를 $45{\mu}m$ 두께로 $500{\mu}m$ 두께의 소다라임 글라스를 $100{\mu}m$ 두께로 박판화하였으며, 에칭 후의 표면 조도는 $0.01{\sim}0.02{\mu}m$를 유지하였다.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.37-44
• /
• 2000

This work was done to investigate problems of cashew coating in a wooden-art industry such as ritual vessels and to improve a curing property of cashew film. The main problem in the cashew coating industry was a small-scale business, insufficiency of facilities, lack of knowledge about cashew resin and painting, and lack of a technology of productivity improvement by accelerated drying time of cashew film. In present, cashew coating for ritual vessels mostly used the petroleum as a thinner. The time of set to touch of cashew film thinning with petroleum on glass plates was increased with the increasement of the thinning proportion, but retarded from 3 to 11 times compared to that of an exclusive thinner according to thinning level. The addition of 20% aceton to petroleum contributed to the high reduction rate up to about 60% at the thinning level of 100%, which was effective to accelerate the drying time of cashew film. Even though only the petroleum or the petroleum-aceton(20%) mixture was used as a thinner, it did not exhibit any distinguishable differences in crack and appearance of cashew-film coated on Frexinus rhynchophylla after 5 cycles of soak under the vacuum-drying treatment.

• 폴리머
• /
• 제35권4호
• /
• pp.356-362
• /
• 2011

폴리카보네이트(polycarbonate, PC)에 화학적 구조가 다른 두 가지의 분지제를 첨가하여 용융중합으로 분지형 폴리카보네이트(branched PC, B-PC)를 합성하였다. 분지제의 함량은 0.001~0.005 mol% 내에서 조절하였다. 합성된 PC의 화학구조는 FTIR, $^1H$ NMR파 $^{13}C$ NMR 스펙트럼을 이용하여 확인하였으며, 분자량, 유리전이온도 및 분해온도는 GPC, DSC와 TGA를 이용하여 측정하였다. Phloro type의 분지제를 가지는 B-PC의 분자량에 낮은 값을 보여주었으며, 유리전이온도는 분자량에 따라 증가하였다. 두 형태의 B-PC 모두 선형 PC와 비교하였을 때 낮은 주파수(frequency) 영역에서 복합점도(complex viscosity)가 높게 나타났고, shear thinning 현상이 크게 나타났다. Shear thinning의 정도를 표시하는 power law index(n)는 선형회귀분석에 의해 계산되었고 0.483~0.996 범위의 값을 보여주었다. Phloro 타입의 B-PC가 높은 shear thinning 경향을 보였으며 이들 B-PC의 유변학적 특성은 동적유변측정기를 이용하여 측정하였다.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.57-60
• /
• 2016

Non Destructive Testing (NDT) methods that are capable of detecting the wall thinning and defects through insulation and cladding sheets are necessary. In this study we developed a Pulsed Eddy Current (PEC) system to detect wall thinning of ferro magnetic steel pipes covered with 95 mm thick fiber glass thermal insulator and shielded with aluminum plate of thickness 0.4 mm. In order to confirm the thickness change due to wall thinning, two different sensors, a hall sensor and a search coil sensor were used as a detecting element. In both the cases, the experimental data indicates a considerable change in the detected pulse corresponding to the change in sample thickness. The thickness of the tube was made to change such as 2.5 mm, 5 mm and 8 mm from the inner surface to simulate wall thinning. Fast Fourier Transform (FFT) was calculated using window approach and the results were summarized which shows a clear identification of thickness change in the test specimen by comparing the magnitude spectra.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.90-95
• /
• 2014

Local wall thinning is a point of concern in almost all steel structures such as pipe lines covered with a thermal insulator made up of materials with low thermal conductivity(fiberglass or mineral wool); hence, Non Destructive Technique(NDT) methods that are capable of detecting the wall thinning and defects without removing the insulation are necessary. In this study we developed a Pulsed Eddy Current(PEC) system to detect the wall thinning of Ferro magnetic steel pipes covered with fiber glass thermal insulator and shielded with Aluminum plate. The developed system is capable of detecting the wall thickness change through an insulation of thickness 10cm and 0.4mm aluminum shielding. In order to confirm the thickness change due to wall thinning, two different sensors, a hall sensor and coil sensor were used as a detecting element. In both cases, the results show a very good change corresponding to the thickness change of the test specimen. During these experiments a carbon steel tube of diameter 210mm and a length of 620mm, which is covered with insulator of 95mm thickness was used. To simulate the wall thinning, the thickness of the tube is changed for a specified length such as 2.5mm, 5mm and 8 mm from the inner surface of the tube. A 0.4mm thick Aluminum plate was covered on the Test specimen to simulate the shielding of the insulated pipelines. For both hall sensor and coil detection methods Fast Fourier transform(FFT) was calculated using window approach and the results for the test specimen without Aluminum shielding were summarized which shows a clear identification of thickness change in the test specimen by comparing the magnitude spectra. The PEC system can detect the wall thinning under the 95 mm thickness insulation and 0.4 mm Al shielding, and the output signal showed linear relation with tube wall thickness.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.189-194
• /
• 2004

When water is evaporated quickly from a water-based colloidal suspension, colloidal particles protrude from the water surface, distorting it and generating lateral capillary forces between the colloidal particles. The protruded colloidal particles are then assembled into ordered colloidal crystalline domains that float on the water surface on account of their having a lower effective density than water. These colloidal crystal domains then assemble together by lateral capillary force and convective flow; the generated colloidal crystal has grain boundaries. The single domain size of the colloidal crystal could be controlled, to some extent, by changing the rate of water evaporation, but it seems very difficult to fabricate a single crystal over a large area of the water's surface without reorienting each colloidal crystal domain. To reorient such colloidal crystal domains, a glass plate was dipped into the colloidal suspension at a tilted angle because the meniscus (airwaterglass plate interface) is pinned and thinned by further water evaporation. The thinning meniscus generated a shear force and reoriented the colloidal crystalline domains into a single domain.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.281-289
• /
• 2009

This research examined the technical feasibility of composite that had two layers of fiberglass reinforcement to enhance the load carrying capacity of lumber. Specimens were prepared from standard lumber made of thinning crop trees such as Larix kaempferi, Pinus koraiensis, and P. rigida. Results indicated that bending properties, hardness, and wood screw withdrawal load of low density lumber from the P. koraiensis increased as the number of layers of fiberglass reinforcement increased. Composite produced by VARTM method showed the MOE increased in all specimens, while the MOR differed on the location, whether the 2-layers of FRP is put on tensile zone or compressive zone. The MOR of high density lumber from Larix kaempferi and P. rigida decreased when they placed into tensile zone, but low density lumber from P. koraiensis increased in same location. The bending toughness only increased high density lumber of Larix kaempferi as the number of layers of fiberglass reinforcement increased. The technique developed by this study may increase an opportunity to use small diameter log with low density for commercial purposes.

• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.497-501
• /
• 2005

Dry film 공정에 의해 PDP(Plasma Display Panel)용 무연 투명유전체를 제조하였다. 여러 슬러리 조성으로부터 고밀도 green sheet를 제조하는데 최적의 조성을 선정하였다. 한편, 슬러리는 양질의 green sheet를 제작하는데 적합한 shear thinning 특성을 나타냈다. 제조한 투명유전체의 열팽창계수는 유리기판인 PD-200과 유사한 $97{\times}10^{-7}/^{\circ}C$로 측정되었다. PD-200에 접합된 투명유전체의 단면 주사현미경 관찰로부터 두 층은 갭이 없이 매우 견실히 접합되어 있음을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.71-76
• /
• 2019

Monochromatic amber phosphor in glasses (PiGs) for automotive LED applications were fabricated with $YAG:Ce^{3+}$, $CaAlSiN_3:Eu^{2+}$ phosphors and Pb-free silicate glass. After synthesis and thickness-thinning process, PiGs were mounted on high-power blue LED to make monochromatic amber LEDs. PiGs were simple mixtures of 566 nm yellow YAG, 615 nm red $CaAlSiN_3:Eu^{2+}$ phosphor and transparent glass frit. The powders were uniaxially pressed and treated again through CIP (cold isostatic pressing) at 200 MPa for 20 min to increase packing density. After conventional thermal treatment at $550^{\circ}C$ for 30 min, PiGs were applied by using GPS (gas pressure sintering) to obtain a fully dense PiG plate. As the phosphor content increased, the density of the sintered body decreased and PiGs containing 30 wt% phosphor had full sintered density. Changes in photoluminescence spectra and color coordination were investigated by varying the ratio of $YAG/CaAlSiN_3$ and the thickness of the plates. Considering the optical spectrum and color coordinates, PiG plates with $240{\mu}m$ thickness showed a color purity of 98% and a wavelength of about 605 nm. Plates exhibit suitable optical characteristics as amber light-converting material for automotive LED applications.

• 대한핵의학회지
• /
• 제31권4호
• /
• pp.452-458
• /
• 1997

저자들은 섬유성 이형성증으로 진단받은 14명 환자의 16병변에서 단순 X-선사진의 소견에 따른 부위별 방사능 집적 정도를 알아보고 그 의의를 평가하기 위해 바늘구멍 골스캔과 단순 X-선사진 소견을 후향적으로 분석하여 비교하여 보았다. 10병변은 수술하여 조직학적으로 확진되었고, 6병변은 방사선학적으로 진단 받았다. 평균연령은 41.1세이며, 두 검사간의 간격은 평균 1.1일이었다. 병소의 위치는 늑골 7예, 골반골 4예, 쇄골 1예, 대퇴골 2예, 장골 1예, 상완골 1예였다. 바늘구멍골스캔 소견상 중심부에서 1+로 정상 방사능 집적을 보인예는 6예(방사선투과성 병변 5예, 간유리모양 병변 1예)이고, 2+로 중등도로 증가된 방사능 집적을 보인 경우는 7예(방사선투과성 병변 4예, 간유리모양 병변 3예)이며 3+로 현저히 증가된 경우는 3예(간유리모양 병변 1예, 경화성 병변 2예)가 있었다. 16예 중 15예에서 주변부 병소에 한 군데 이상의 증가된 방사능 집적이 불규칙한 환상이나 결절모양으로 나타났는데, 2+의 중등도 방사능 집적이 경화성테두리 5예와 비가시성 피질 1예에서, 그리고 3+의 현저한 방사능 집적증가는 격막과 피질천공을 보인 모든 예(7예, 8예)에서, 그리고 비가시성 피질 9예 중 8예에서 나타났다. 16예 중 1예는 중심부와 주변부 병소가 균일한 2+의 집적증가를 보였다. 바늘구멍 골스캔상 섬유성 이형성증의 방사선투과성병변은 이제까지 보고된 것과는 다르게 많은 예에서 인접 정상골과 비슷한 집적을 보였다. 또한, 격막, 피질골절 또는 비가시성 피질 등의 소견을 보이는 부분에 방사능 집적이 현저히 증가되어 주변부의 불규칙한 환상 또는 결절모양의 방사능 집적형태를 보였으며, 이들 병소는 골대사가 활발한 부위로 생각된다. 이와 같은 골의 섬유성 이형성증의 바늘구멍 골스캔 소견을 분석함으로써 부위별 활성도를 평가하여 진단, 예후 추정 및 치료방침을 결정하는데 유용하리라 사료된다.