• 암석학회지
• /
• 제18권4호
• /
• pp.337-348
• /
• 2009

전남 해남의 순신 천열수 금광상을 배태하고 있는 응회질암층은 규화변질작용과 견운모 변질작용을 받았으나 석영반정에는 포획될 당시의 조성이 보존되어 있는 투명하고 균질한 유리포유물이 산출되고 있다. 유리포유물의 크기는 $5-200\;{\mu}m$이며 유리(60~80 vol%) + 기포(15~30 vol%) $\pm$ 딸결정(<10 vol%)으로 구성되어 있다. 일정한 정육각형의 고온석영 결정형의 유리포유물은 석영 반정의 가장자리에 산출되는 경향이 있으며 모두 초생포유물이다. 유리포유물은 석영반정이 성장하고 있던 마지막 단계의 액상선 성분을 나타내는 것으로 매우 분화된 K 성분이 높은 칼크-알칼리계열에 속하는 유문암질암이다. 이 액상선의 멜트내의 $Au_2O_3$ 함량은 매우 미비하여(<0.30 wt%) Au 성분은 잔류용융체에 부화되지 않았음을 나타내고 있다. 유리포유물이 나타내는 조직적 특성은 마그마가 지표에 분출되기 전에 이미 2-4 wt%의 물에 포화되었음을 지시하며, 고온 석영형으로 산출되는 유리포유물의 모습은 모결정인 석영이 $\beta$-석영 안정영역에서 결정화작용이 끝났음을 의미한다. 유리포유물에 용해되어 있는 2-4 wt%의 물에 포화된 마그마의 포화압력은 약 300-900 bar를 나타낸다. 이는 해남의 화산암을 형성한 마그마는 적어도 지하 0.8-2.5 km의 깊이의 마그마 챔버에서 분출한 것으로 계산된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.95-98
• /
• 2005

This paper proposes the solutions predicting the coefficient of the thermal expansion changes of composites which include the fiber-like shaped ($a_1$ > ($a_2$ = ($a_3$) and the disk-like shaped (al = a2> a3) inclusions like two dimensional geometries, which has one aspect ratios, ${\alpha}$ = ($a_1$ /($a_3$). The analysis follows the procedure developed for elastic moduli by using the generalized approach of Eshelby’s equivalent tensor. The influences of the aspect ratios, on the effective coefficient of thermal expansion of composites containing aligned isotropic inclusions are examined. This model should be limited to analyze the composites with unidirectionally aligned inclusions and with complete binding to each other of both matrix and inclusions having homogeneous properties. The coefficient of thermal expansion of composites (${\theta}_{11}$,${\theta}_{22}$and ${\theta}_{33}$) are investigated. From material data of the composites with glass fiber in epoxy resin, the thermal expansions along the aspect ratio were obtained and similar to the Chow model. The longitudinal coefficients of thermal expansion ${\theta}_{11}$decrease, as the aspect ratios increase. However, the transverse coefficients of thermal expansion ${\theta}_{22}$increase or decrease, as the aspect ratios increase. And both of them decrease, as the concentration increases.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.1047-1054
• /
• 2004

Internal defects in the glass, like-as micro-voids, micro-cracks, or inclusions, easily cause the failure when the glass is exposed to the shock or the thermal variation. In order to produce the highly reliable glass product, the precision inspection of the defect in the glass is required. For this purpose, this paper proposes a machine vision technique based on the auto-focusing method, which searches the defect and measures the location under the fact that the edge image of defect must be the most clear when the focal plane of CCD camera is coincided with the defect. As for the search index, the gradient indicator is presented. The basic principles are verified through the simulations for the computer-generated defect images, where the affects of defect shape, gray level of background, and the brightness of the defect image are also analyzed. Finally, experimental results for actual glass specimens are shown to confirm the applicability of this method to the actual field.

• 암석학회지
• /
• 제13권1호
• /
• pp.34-45
• /
• 2004

본 연구는 제주도에 분포하는 현무암에 포획된 맨틀포획암과 맨틀포획암에 포획된 유체포유물에 대한 암석 및 조직에 대한 기재와 하부지각물질이 초고온의 변성작용을 받아 형성된 부카이트라는 산성질포획암에 관한 예비연구이다. 제주도에 분포하는 알칼리현무암에는 초염기성포획암, 산성질포획암, 큐뮬레이트포획암이 풍부하게 포획되어 있다. 초염기성포획암은 첨정석(스피넬)-레졸라이트가 대부분이며, 첨정석-레졸라이트는 감람석, 사방휘석, 단사휘석과 첨정석로 이루어져 있다. 부카이트는 석영, 사장석과 검은 세맥으로 이루어져 있으며, 큐뮬레이트포획암은 단사휘석 혹은 단사휘석과 사장석으로 이루어진 거정의 결정들로 구성되어 있다. 이들 포획암들의 구성입자들은 조립질이며, 하부지각/상부맨틀에서의 복잡한 진화사를 보여주는 변성암의 특징을 나타낸다. 초염기성포획암에는 프로토그라뉼라, 반상쇄성, 등립질의 조직이 관찰되며, 이러한 조직의 존재는 제주도의 상부맨틀에 전단체계가 형성되어 있음을 나타낸다. 프로토그라뉼라 조직에서는 거정의 사방휘석 결정들 중간에 첨정석, 세립의 감람석이 시공간적인 연관성을 지니고 항상 같이 산출되어지는데 이는 첨정석과 감람석이 사방휘석에서 용리되어진 것으로 여겨진다. 이러한 첨정석과 감람석이 사방휘석에서 용리되어진 조직은 프로토그라뉼라조직이 형성되기 이전에 고온에서 알루미나 함량을 많이 지닌 암석이 평형상태를 유지했음을 의미하며, 원래의 암석은 알루미나가 풍부한 사방휘석을 지닌 페리도타이트인 것을 암시한다. 이러한 하부지각/상부맨틀에서 유래하는 포획암에는 세 종류의 유체포유물이 포획되어 있다. I형은 이산화탄소를 풍부하게 가지고 있는 포유물이고, II형은 다상의 규산염용융포유물로서 유리$\pm$탈유리화된 결정들$\pm$딸결정들 ＋수축기포로 구성되어 있다. III형은 황화용융포유물이다. 제주도의 맨틀포획암에는 I형이 가장 풍부하게 포획되어 있으며, 이산화탄소가 맨틀에 존재하는 가장 풍부한 휘발성성분이며, 맨틀과 같은 고온고압에서 하나의 독립된 상으로 존재한다는 것을 반영하고 있다. 또한 맨틀과 같은 환경에서 규산염멜트(melt), 황화멜트, 이산화탄소가스 사이에 서로 불용융(immscibility) 상태도 형성되고 있음을 나타내고 있다. 대부분의 다상의 규산염용융포유물 (II형)은 상당한 양의 규산질 유리를 지니고 있으며, 이는 하부지각/상부맨틀에서 SiO$_2$ 함량이 높은 규산질마그마가 형성되고 있음을 지시한다. 암석학적, 지화학적 정보와 함께 맨틀 혹은 하부지각 암석에 포획된 유체포유물과 용융포유물 데이터는 한반도의 맨틀에 대한 유체체계, 유체-마그마-광물 사이의 강호작용, 모암인 포획암에 대한 압력-온도 진화사를 파악하는데 크게 이용될 것이다.

• 광물과 암석
• /
• 제33권1호
• /
• pp.65-71
• /
• 2020

유리 표준물질은 정밀 지구화학 분석법에 필수적으로 이용되는 표준물질이다. 기존의 합성 유리 표준물질의 단점인 자연 암석과의 조성 차이로 인한 높은 불확실성을 보완하기 위해, 자연산 암석을 이용하여 유리 표준물질을 제작하였다. 백두산 흑요암인 NK-B1G 시료는 미세결정이나 포유물 등의 결정을 포함하지 않는 자연 유리질 암석으로, EPMA나 LA-ICPMS 분석 등의 미세분석을 위한 표준물질로서의 적합성을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제6권1호
• /
• pp.11-21
• /
• 1999

For microelectronic packaging application, the crystallizable glass powder in CaO-$A1_2O_3-SiO_2-B_2O_3$system was mixed with various amounts of alumina inclusions (\approx 4 $\mu \textrm{m}$), and its sintering behavior, crystallization behavior, and dielectric constant were examined in terms of vol% of alumina and the reaction between the alumina and the glass. Sintering of the CASB glass powder alone at $900^{\circ}C$ resulted in full densification (99.5%). Sintering of alumina-filled composite at $900^{\circ}C$ also resulted in a substantial denslfication higher than 97% of theoretical density, In this case, the maximum volume percent of alumina should be less than 40%. XRD analysis revealed that there was a partial dissolution of alumina into the glass. This alumina dissolution, however, did not show the particle growth and shape accommodation. Therefore, the sintering of both the pure glans and the alumina-filled composite was mainly achieved by the viscous flow and the redistribution of the glass. Alumina dissolution accelerated the crystallization initiation time at $1000^{\circ}C$ and hindered the densification of the glass. Dielectric constants of both the alumina-filled glass and the glass-ceramic composites were increased with increasing alumina content and followed rule of mixture. In case of the glass-ceramic matrix composites showed relatively lower dielectric constant than the glass matrix composite. Furthermore, as alumina content increased, crystallization behavior of the glass was changed due to the reaction between the glass and the alumina. As alumina reacted with the glass matrix, the major crystallized phase was shifted from wollastonite to gehlenite. In this system, alumina dissolution strongly depended on the particle size: When the particle size of alumina was increased to 15 $\mu\textrm{m}$, no sign of dissolution was observed and the major crystallized phase was wollastonite.

• Advances in materials Research
• /
• 제5권2호
• /
• pp.121-130
• /
• 2016

In an attempt to reach a balance of performances in homo-polypropylene based system, the effects of single and hybrid reinforcements inclusions comprising calcium carbonate nanoparticles (2, 4 and 6 phc) and glass fibers (10 wt.%) on the mechanical and thermal properties were investigated. Different samples were prepared by employing twin-screw extruder and injection molding machine. In morphological studies, the uniform distribution of glass fibers in PP matrix, relative adhesion between glass fibers and polymer, and existence of nanoparticles in polymer matrix were observed. $PP/CaCO_3$ (6 phc) as compared to pure PP and PP/GF had superior tensile and flexural strengths, impact resistance and deformation temperature under load (DTUL). $PP/GF/CaCO_3$ (6 phc) composite displayed comparable tensile and flexural strengths and impact resistance to neat PP, while its tensile and flexural moduli and deformation temperature under load (DTUL) were 436%, 99% and $26^{\circ}C$greater respectively. The maximum impact resistance was observed in $PP/CaCO_3$(6 phc). The highest DTUL was perceived in PP hybrid nanocomposite containing 10 wt.% glass fiber and 4 phc $CaCO_3$ nanoparticle.

• 방사성폐기물학회지
• /
• 제19권3호
• /
• pp.339-352
• /
• 2021

Legacy waste from the decommissioned A-1 nuclear power plant in the Slovak Republic is scheduled for immobilisation within a tailored alkali borosilicate glass formulation, as part of ongoing site cleanup. The aqueous durability and characterisation of a simulant glass wasteform for Chrompik III legacy waste, was investigated, including dissolution experiments up to 112 days (90℃, ASTM Type 1 water). The wasteform was an amorphous, light green glassy product, with no observed phase separation or crystalline inclusions. Aqueous leach testing revealed a suitably durable product over the timescale investigated, comparing positively to other simulant nuclear waste glasses and vitreous products tested under similar conditions. Iron and titanium rich precipitates were observed to form at the surface of monolithic samples during leaching, with the formation of an alkali deficient alteration layer behind these at later ages. Overall this glass appears to perform well, and in line with expectations for this chemistry, although longer-term testing would be required to predict overall durability. This work will contribute to developing confidence in the disposability of vitrified Chrompik legacy wastes.

• 한국군사과학기술학회지
• /
• 제21권1호
• /
• pp.25-39
• /
• 2018

In this paper, an integrated analysis model for evaluating the underwater acoustic performance of the multilayered acoustic coatings containing visco-elastic composite layers with hollow glass microspheres is described. The model uses the effective medium theory considering the acoustic scattering and resonance effects of the inclusions. Also, the model incorporates the compressive deformation mechanism associated with hydrostatic pressure. The technique developed in this work was used as the acoustic layer design and performance analysis tools for the practical hull coatings and acoustic baffles in Korean next generation submarines.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.167-185
• /
• 1999

In the present paper, KLN crystals have been grown along <001>, <100> and <110> directions by the top seeded solution growth (TSSG) method from Li-richer melts with different compositions. The morphologies of KLN crystals grown along different directions have been studied, and the well-developed facets have been unambiguously indexed using X-ray goniometer and stereographic projection analysis. The growth mechanism and defects such as cracks and inclusions were discussed on the basis of observations of facets on the crystal-melt interfaces. The crystal compositions were determined by chemical analysis method. The structure and lattice constants of KLN crystals were determined and calculated on the basis of XRD data by using TREOR90 and PIRUM programs. The Curie temperature and optical absorption were determined by dielectric constant peak and spectrum measurements, respectively. The blue SHG characteristics of a KLN sample were also investigated using a pulsed dye laser. PACS: 42.70.M;81.10;81.10A;42.65.K.