• 폴리머
• /
• 제27권4호
• /
• pp.299-306
• /
• 2003

유리 섬유와 고분자로 구성된 복합재료에서는 이종재료 간의 계면 상호작용과 접착력이 재료의 성능과 기능에 큰 영향을 미친다. 따라서 표면처리에 의한 섬유개질 및 계면층 제어는 우수한 복합재료를 제조하는데 있어 매우 중요하다. 본 연구에서는 복합재료 계면에서의 물리화학적 현상을 개선하기 위해 실란커플링제를 이용한 유리 섬유의 형태구조 표면처리방법을 조사하였다. 또한 표면처리조건 (사이징 재료, 농도 등)에 따른 계면 특성과 이와 연관된 미세구조 분석을 통하여 유리 섬유/폴리프로필렌 복합재료의 계면설계기법을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.462-462
• /
• 2010

Glass fiber is widely used in architectural acoustics or building acoustics for sound absorption since it was introduced into China for about 50 years. But recent years, with people pay more attentions to the air cleansing and their health which may be affected by the tiny fiber of the glasswool, a voluntary tendency opposing glass fiber of room using is gradual appeared in China. This paper discusses both the main opinions towards the question whether there are harmful impacts on people health from glassfiber, and the application circumstance of it's applying in china. This paper focuses on another substitute sound absorbing material, melamine foam, to discuss the strong environmental friendly tendency opposing glass fiber of room using in China now.

• 환경위생공학
• /
• 제10권2호
• /
• pp.67-73
• /
• 1995

In order to study of characteristics of collected filter as analysis of carbon in airborne particulate matters by Elemental Analyzer, quartz fiber filter and glass fiber filter were used. The results are followed as; There was no difference of confidence in collection rate of airborne particulate matters between quartz fiber filter and glass fiber filter. Airborne particulate matters were collected on both filters evenly and the use of quartz fiber filter is better than glass fiber filter as analysis of carbon by thermal method.

• ETRI Journal
• /
• 제27권4호
• /
• pp.411-417
• /
• 2005

$Pr^{3+}-doped$ selenide glass optical fiber, which guarantees single-mode propagation of above at least 1310 nm, has been successfully fabricated using a Ge-Ga-Sb-Se glass system. Thermal properties such as glass transition temperature and viscosity of the glasses have been analyzed to find optimum conditions for fiber drawing. Attenuation loss incorporating the effects of an electronic band gap transition, Rayleigh scattering, and multiphonon absorption has also been theoretically estimated for the Ge-Ga-Sb-Se fiber. A conventional double crucible technique has been applied to fabricate the selenide fiber. The background loss of the fiber was estimated to be approximately 0.64 dB/m at 1650 nm, which can be considered fairly good. When excited at approximately 1470 nm, $Pr^{3+}-doped$ selenide fiber resulted in amplified spontaneous emission and saturation behavior with increasing pump power in a U-band wavelength range of 1625 to 1675 nm.

• 한국결정성장학회지
• /
• 제25권6호
• /
• pp.263-271
• /
• 2015

기존의 내알칼리 유리섬유는 복합재료의 보강섬유로 가장 널리 사용되고 있는 일반적인 E-glass fiber보다 우수한 내화학 특성을 갖고 있으나 용융유리의 점도가 너무 높아 섬유화가 어려운 문제점을 가지고 있다. 본 연구에서는 지르코니아 함량이 상용 제품에 비해 낮은 범위에서 지르코니아 함량별로 내알칼리유리섬유를 제조하고 이들의 특성을 E-glass 섬유와 비교하였다. 지르코니아의 함량을 0.5~16 wt%까지 변화시키면서 제조한 각각의 배치원료를 $1600^{\circ}C$에서 2시간 용융하여 투명하고 맑은 유리를 얻을 수 있었다. 이들 유리는 약 90 %의 높은 가시광 투과율을 나타내었고, 열적특성에서 $703{\sim}887^{\circ}C$의 연화점을 나타내었으며, 지르코니아의 함량이 증가함에 따라 연화점이 상승하는 경향을 나타내었다. 지르코니아 함량이 4 wt%인 조성을 E-glass 조성과 비교한 결과, 연화점에서는 $-94^{\circ}C$의 차이를, 고온점도에 있어서는 log3 온도가 $+68^{\circ}C$, log5 온도가 $-13^{\circ}C$의 차이를 나타내었다. 내알칼리 유리섬유를 알칼리용액에 48시간 및 72시간 침적 후 SEM을 통해 섬유의 내침식성이 양호함을 확인할 수 있었고, 인장강도도 일반 E-glass 섬유에 비해 48시간에서 1.7배와 72시간에서 2.2배의 높은 값을 나타냄을 알 수 있었다. 결론적으로 이러한 내알칼리 유리섬유는 쉬운 제조조건과 낮은 지르코니아 함량에도 불구하고 좋은 특성 때문에 일반적인 내알칼리 유리섬유로서 널리 사용될 수 있을 것으로 판단되었다.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1106-1114
• /
• 1993

본 연구에서는우수한 섬유강화 고분자복합판의 제조 및 개량을 섬유구조의 분리. 배향의 관점에서 연구한다. 유리섬유매트는 유리섬유를 50mm의 길이로 균일하 게 절단하여 공기중에서 분산시켜 6~7mm두께로 만들고,이 유리섬유매트를 바늘의 종류와 스트레칭 횟수에 따라 니들펀칭하여 유리섬유의 매트구조를 변화시킨다. 유리 섬유의 매트구조 별로 모재와 적층시킨 다음 열압축프레스를 사용하여 1차로 시이트를 제작하고, 이 제작된 시이트를 가열로로 가열하여 2차 고온압축 프레스성형한다. 이 때 섬유와 모재의 분리 및 배향의 상관관계를 나타내는 상관계수를 구하고, 이 계수에 미치는 매트 구조의 영향에 대한 실험결과를 보고한다.

• Advances in Computational Design
• /
• 제7권3호
• /
• pp.253-279
• /
• 2022

This study investigated and predicted the Marshall stability of glass-fiber asphalt mix, carbon-fiber asphalt mix and glass-carbon-fiber asphalt (hybrid) mix by using machine learning techniques such as Artificial Neural Network (ANN), Support Vector Machine (SVM) and Random Forest(RF), The data was obtained from the experiments and the research articles. Assessment of results indicated that performance of the Artificial Neural Network (ANN) based model outperformed applied models in training and testing datasets with values of indices as; coefficient of correlation (CC) 0.8492 and 0.8234, mean absolute error (MAE) 2.0999 and 2.5408, root mean squared error (RMSE) 2.8541 and 3.3165, relative absolute error (RAE) 48.16% and 54.05%, relative squared error (RRSE) 53.14% and 57.39%, Willmott's index (WI) 0.7490 and 0.7011, Scattering index (SI) 0.4134 and 0.3702 and BIAS 0.3020 and 0.4300 for both training and testing stages respectively. The Taylor diagram also confirms that the ANN-based model outperforms the other models. Results of sensitivity analysis show that Carbon fiber has a major influence in predicting the Marshall stability. However, the carbon fiber (CF) followed by glass-carbon fiber (50GF:50CF) and the optimal combination CF + (50GF:50CF) are found to be most sensitive in predicting the Marshall stability of fibrous asphalt concrete.

• The Korean Journal of Ceramics
• /
• 제1권3호
• /
• pp.160-164
• /
• 1995

Mechanical and chemical tests were performed on $Zro_2 \cdot SiO_2$ glass fibers manufactured by the sol-gel method and E-glass fibers-reinforced cement composites in order to investigate the interactions between glass fibers and cement matrices. Chemical attack leads to corrosion of the glass fiber surfaces. In the corrosion reactions, the surface of $30ZrO_2 \cdot 70 SiO_2$ glass fibers developed a densified concentric layer, which consists of glass corrosion products with much higher Zr and lower Si than the fresh glass fiber. The layer of reaction product is regarded to stiffen the cement matrices and provide a useful improvement to the mechanical properties. The addition of $ZrO_2$ content increases the corrosion resistance of glass fibers in cement by forming a passivating layer on the surface of glass fibers.

• Journal of Preventive Medicine and Public Health
• /
• 제30권1호
• /
• pp.69-76
• /
• 1997

To exanime in vivo tissue reactions of glass fibers, we injected glass fibers to rats subcutaneously. We made fibers of average dimensions of approximately $2{\mu}m$ in diameter and $60{\mu}m$ in length. After instilation of glass fiber we sacrificed rats sequentially at 1, 3 and 6 months. At 1 month after injection of glass fibers, the exposure area turned to yellow color and formed well-demarcated round mass. The average size of the mass was $1\times0.3cm$. Grossly detectable mass was decreased in size at 6 months compared to 1 or 3 months. Microscopically, strong foreign body reaction to glass fibers, inflammation and fibrosis were observed until 6 months. Foreign body reaction was increased up to 3 months, but it was decreased after 6 months. In scanning electron microscope, there was many bundles of glass fibers around the inflammation area, but the size of glass fibers were gradually reduced from 1 month to 6 months. These results suggest that subcutaneous exposure of glass fiber can provoke strong tissue reaction including foreign body granulomas, inflammation and fibrosis. But glass fiber itself did not produce any neoplastic changes.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.221-231
• /
• 2005

In this study, occupational exposures to man-made mineral fibers (MMMFs) including glass wool, rock wool, and continuous glass filament fibers were determined and evaluated on the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV). A total of 171 personal samples collected from 4 glass wool fiber, 2 rock wool fibers, 4 continuous filament glass fiber products manufacturing and a glass fiber and rock wool insulations using industries, and determined respirable fibers concentrations using the National Institute for Occupational Safety and Health (NIOSH) Method 7400, "B counting rule. The fiber concentrations of samples from workers installing thermal insulations in a MMMF using industry showed the highest value: geometric mean (GM) = 0.73 f/cc and maximum = 2.9 f/cc, 70% of them were above the TLV, 1 f/cc. Workers' exposure level (GM= 0.032 f/cc) in the rock wool manufacturing industries was significantly higher than those of glass wool (GM=0.012 f/cc) and continuous filament glass fibers (GM=0.010 f/cc) manufacturing industries (p<0.01). No samples were more than the TLV in the MMMF manufacturing industries. There was a significant difference among companies in airborne fiber levels.