• Macromolecular Research
• /
• 제13권1호
• /
• pp.8-13
• /
• 2005

A novel silicon-containing epoxy resin, the diglycidylether of bisphenol A-silicon (DGEBA-Si), was synthesized and characterized. The properties of the DGEBA-Si epoxy resin cured with 4,4-diaminodiphenyl methane (DDM), including its cure behavior, glass transition temperature, thermal stability, and mechanical strength were investigated. The char yield of the DGEBA-Si/DDM system was higher than that of a commercial DGEBA/DDM system, indicating that the DGEBA-Si epoxy resin showed good flame-retardance. The cured DGEBA-Si/DDM specimens possessed lower glass transition temperatures and higher mechanical properties than DGEBA/DDM specimens. These features were attributed to the introduction of siloxane groups into the main chain of the epoxy resin, which resulted in the improved flexibility of the cured DGEBA-Si/DDM system.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.188-193
• /
• 2008

Epoxy/Organically Modified Layered Silicate Nanocomposites were prepared by dispersing synthetic layered silicate modified with alkyl ammonium ions. In the dispersing process, the organically modified layered silicate were mixed in epoxy resin with shearing, and aggregation of the silicate were removed by centrifugal separation after mixing epoxy resin and silicates. Micrographs taken by transmission electron microscopy(TEM) indicate that the nanocomposites have a mixed morphology including both parallel silicate layers and exfoliated silicate layers area, As the thermal properties, the glass transition temperature of the nanocomposites was shifted to a higher temperature($+6^{\circ}C$)than pure epoxy. Furthermore, dispersion of OMLS will prevented relative permittivity from increasing at a high temperature above the glass transition temperature.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.105-108
• /
• 2002

Materials, matrices mixed with various kinds of conductive or magnetic powder, such as ferrite, have been used as the electromagnetic wave absorbing ones, so called RAM(radar absorbing material). The structure that does not only have electromagnetic waves absorbing property like RAM but also supports loads is called RAS(radar absorbing structure). One of the existing manufacturing process of RAS is to compound with conductive powders the glass fiber-reinforced composite with good permeability and the ability to support loads. The process, however, causes a number of problems, such as the degradation in the mechanical properties of the composite, especially, interlamina shear strength. In this study, mechanical properties of glass fabric/epoxy composite containing 7wt% carbon black powders were measured and compared with pure glass fabric/epoxy composites.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.785-792
• /
• 2000

Repair and retrofit system of concrete structures has been developed from conventional reinforced concrete overlaying, steel plate bonding and recently to fiber composite systems. Research and study on carbon, aramid, and glass fiber composite system has been actively carried out from all over the world Glass fiber composite is proved to be competitive technically and enconomically, among fiber composite system. CAF system is a system developed locally using all domestic materal, glass fabric and epoxy, and improved in shear bonding property by utilizing silica fume mixed with epoxy. All the tests on material properties, structural behavior, constructiveness at site and quality control procedure proved to be most appropriate system so far developed. Futher research work is and will be under progress for utilization of this system which will be applied to more adverse situation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.810-812
• /
• 1988

This paper is to investigate dielectric properties and new fabrication method of Glass-Cloth/Epoxy composite materials. According to the results of this paper, gelling point temperature is affected significantly on the ambient temperature. And Tan${\delta}$ characteristics of Glass-Colth/Epoxy composite materials is also affected significantly on the state of interior void of glass cloth and interface coupling between epoxy resin and glass cloth.

• 비파괴검사학회지
• /
• 제34권2호
• /
• pp.119-127
• /
• 2014

An epoxy coating applied to the concrete surface of a containment building deteriorates in hazardous environments such as those containing radiation, heat, and moisture. Unlike metals, the epoxy coating on a concrete liner absorbs and discharges moisture during the degradations process, so it has a different density and volume during service. In this study, acoustic impedance was adopted for characterizing the degradation of a glass-reinforced epoxy coating using the acoustic reflection coefficient (reflectance) on a rough epoxy coating. For estimating the acoustic reflectance on a wavy epoxy coating surface, a probabilistic model was developed to represent the multiple irregular reflections of the acoustic wave from the wavy surface on the basis of the simulated annealing technique. A number of epoxy-coated concrete specimens were prepared and exposed to accelerated aging conditions to induce an artificial aging degradation in them. The acoustic impedance of the degraded epoxy coating was estimated successfully by minimizing the error between a waveform calculated from the mathematical model and a waveform measured from the surface of the rough coating.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.326-326
• /
• 2001

Epoxy/glass fiber 복합재는 높은 strength와 stiffness를 갖는 장점이 있지만 impact strained energy를 효율적으로 발산시킬 수 있는 mechanism을 가지고 있지 않기 때문에 damping 능력이 떨어진다 Impact strength와 damping 성능을 증가시키기 위해 사용되어지고 있는 방법은 형상기억 고분자를 이용한 것으로 상대적으로 높은 strength와 impact에 대한 흡수 및 발산을 가지고 있다 형상기억 고분자는 glass transition temperature(G$_{g}$) 근처에서 높은 damping 능력을 가지고 있다. (중략)

• 대한금속재료학회지
• /
• 제49권10호
• /
• pp.760-765
• /
• 2011

This paper presents a study of the tensile behavior of carbon and glass fiber reinforced epoxy hybrid laminates manufactured by vacuum assisted resin transfer molding (VARTM). The objective of this study was to develop and characterize carbon fiber reinforced plastic hybrid composite material that is low cost and light-weight and that possesses adequate strength and stiffness. The effect of position and content of the glass fabric layer on the tensile properties of the hybrid laminates was examined. The strength and stiffness of the hybrid laminates showed a steady decrease with an increase of the glass fabric content this decrease was almost linear. Fracture strain of these laminates showed a slight increasing trend when glass fabric content was increased up to 3 layers, but at a glass fabric content > 3 layers the strain was almost constant. When glass fabric layers were at both outer surfaces, the hybrid laminate exhibited a slightly higher tensile strength and elastic modulus due to the small amount of glass yarn pull-out.

• 항공우주기술
• /
• 제6권1호
• /
• pp.1-6
• /
• 2007

본 연구에서는 상온에서 수작업으로 함침/경화시킨 일 방향 glass/epoxy 복합재료 적층판의 설계압축강도 값을 제시하고 있다. 총 39개의 시편으로부터 측정된 압축강도 값은 two-parameter Weibull 분포를 따른다고 가정하였다. MIL-HDBK-17F에 제시된 방법과 절차에 따라 동일형상의 복합재료 시편에 대해 구한 B-Basis 값과 A-Basis값은 각각 평균 압축강도의 82.6% 및 65.9%로 확인되었다. 항공기 주익의 스파 Cap에 동일 복합재료를 적용할 경우를 고려하여 B-base 값의 50%를 설계압축강도 값으로 산정하였다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1285-1293
• /
• 1992

본 연구에서는 glass/epoxy 직조된 복합재료에 있어서 원공 및 판폭의 크기가 노치강도에 미치는 영향을 명확히 하고, 또한 노치강도 및 파괴조건과 위에서 언급한 특성길이와의 관계를 검토하였다.