• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.34-42
• /
• 2016

Purpose: This study was performed to improve the drying quality and drying rate of ginseng slices by combining microwave and far-infrared drying techniques. Methods: Based on single-factor experiments and analyses, a quadratic regression orthogonal rotation combination design was adopted to study the effects of the moisture content at the conversion point between the microwave and far-infrared techniques, the ginseng slice thickness and the far-infrared drying temperature on the chip drying time, the surface color difference value, the nutritional composition and the surface shrinkage rate index. Results: Compared to the far-infrared drying alone, the combined microwave and far-infrared drying resulted in an increase in the saponin content of the ginseng slices and reductions in the drying time, surface color difference, and shrinkage rate. Conclusions: We established a mathematical model of the relationships between the surface shrinkage rate index and the experimental factors using the multi-objective nonlinear optimization method to determine the optimal parameter combination, which was confirmed to be the following: microwave and far-infrared moisture contents of 65%, a ginseng slice thickness of 1 mm, and a far-infrared drying temperature of $54^{\circ}C$.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.4
• /
• pp.276-281
• /
• 2013

This study was conducted to compare the contents of ginsenoside according the water extract conditions of red ginseng. In method A, red ginseng extract was prepared at $75^{\circ}C$ for 18 hours by 1 time extraction, and method B, the preparation was done at $85^{\circ}C$ for 18 hours by 1 time extraction. In method C, the primary extract prepared at $75^{\circ}C$ for 9 hours was blended with the secondary extract prepared by re-extracting the red ginseng residue obtained after the primary extraction, at $85^{\circ}C$ for 9 hours. Method D was the same procedure as method C but the extraction temperature for the primary extraction was $85^{\circ}C$ and that for the secondary extraction was $95^{\circ}C$. The contents of total and $Rb_1$, $Rg_1$ and $Rg_3$ ginsenoside were highest in Method C. The content of prosapogenin (ginsenoside $Rg_2$, $Rg_3$, $Rb_1$ and $Rb_2$) was highest in Method B. There was no consistent tendency in Brix, pH, Hue value and absorbance among extraction methods.

• Korean journal of food and cookery science
• /
• v.24 no.3
• /
• pp.273-281
• /
• 2008

To determine the nutritional quality and physical properties of ginseng-chicken meat porridge, 10 kinds of ginsengchicken meat porridge samples containing waxy and/or non-waxy rice were analyzed for in vitro protein digestibility and their degree of starch hydrolysis. Viscosity and spreadness were determined for the gelatinized pastes of the porridge samples. Microphotographs of the starch granules and pastes were studied to confirm structural changes in the rice starch during cooking. The starch paste from non-waxy rice porridge had higher viscosity than the starch paste from the waxy rice porridge; however, in the case of the ginseng-chicken meat porridge, the difference in viscosity was negligible. Microphotograph comparisions between the waxy rice porridge and non-waxy rice porridge indicated apparent differences in the shapes of their starch granules and gels. The granule surface of the non-waxy rice was very rough while that of the waxy rice was very smooth; this difference would lead to organoleptical discrepancy. The added ginseng increased the protein digestibility of the chicken meat; however, the protein digestibility of the ginseng-chicken meat porridge was lower than that of the chicken meat or rice porridge due to inhibited protein digestion by the gelatinized starch. Finally, the rice porridge had increased starch hydrolysis with additions of chicken meat and vegetables.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.1-7
• /
• 1980

In order to establish effective extracting method of ginseng extracts from fresh ginseng, the yield, chemical composition, physical properties and organoleptic quality of the extracts, which are extracted with various concentrations of ethanol, were investigated. The results are as follows : 1. The yield of the extracts was increased with decreasing the concentration of ethanol as solvent. As in case of water as a solvents, the highest yield was achieved when 23.64% of water was used. The yield were 12.3% and 9.05%, when 70% and 90% of ethanol were used, respectively lively. 2. Crude protein content is the highest level and nitrogen·free extracts content is the lowest at the concentration of 50% ethanol. Lipid was increased linerly while ash was decreased as increment of ethanol concentration. 3. Viscosity and residue of the extracts also decreased in accordance with the increament of ethanol concentration and the transmittance value and pH of extract solutions were almost similar except transmittance value of the water extracts. 4. The extracts extracted with 70% ethanol gave the best result of sensory test. The total sensory test score of each extracts (70%, 90%, 50%, 0% and 30%) were 70, 65, 50, 46 and 41, respectively.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.587-591
• /
• 2014

Experiments for a control method that enhances the yield to produce high quality red ginsengs have been performed. In the first steaming process of a series of processes to produce red ginsengs from raw ginsengs, there occur several undesirable defects on ginsengs such as cracks of ginseng body, inside cavity and inside white. These defects lead to deterioration in product qualities. Therefore an improved control method that minimizes these undesirable defects is needed in order to increase the yield of high quality red ginsengs. Until these days, the steaming process control methods such as controlling the steaming temperature and/or pressure have been studied. However, such control methods are not adequate enough to minimize the undesirable defects in steamed ginsengs. On the other hand, in this experiment, we suggest a control method that minimizes the undesirable defects through a weight control of steamed ginsengs, keeping the steaming temperature at $96{\sim}99^{\circ}C$ as usual. Experiments with the weight control show that amount of cracks on the steamed ginseng body can be reduced.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.2
• /
• pp.138-141
• /
• 2007

Good quality seedlings produced in the seedbed of Yangjik, traditional seedling cultivation, is one of the most important factors in determining the yield and quality of $4{\sim}6-year-old$ ginseng. This study was carried out to substitute Yacto, traditional organic fertilizer, for economical compost in the cultivation of seedling by fertilizing relatively little amount of compost into seedbed soil. Bulk density and solid phase were decreased in physical properties of seedbed soil, while air phase and porosity were increased by more addition of compost. When the amount of applied compost in seedbed soil was above $8{\ell}$ per Kan, the contents of nutrient were exceeded the range of optimal standard for ginseng cultivation. Chlorophyll content and stem length were increased by more addition of compost, while the length and the width of leaves showed the highest value at the application level of $8{\ell}$ per Kan. Heat injury was also increased distinctly above the application level of $8{\ell}$ per Kan. The number of first grade seedlings and usable seedlings, and fresh root weight per plant showed the peak at application level of $8{\ell}$ per Kan, respectively. Fertilizing the compost of $8{\ell}$ per Kan into seedbed soil was the optimal amount for producing the good quality seedlings.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.278-282
• /
• 1994

Ginseng saponins and proximate components were considerably resistant to both gamma irradiation at less than 10 kGy and commercial ethylene oxide cycle, while sulfur-containing amino acids, reducing sugar, pH, and acidity of white ginseng powder were significantly changed by EO fumigation. The contents of saponins, reducing sugar, pH and acidity were relatively liable to change under the higher relative humidity (90%), especially in the non-treated control sample. However, irradiated samples at optimum-dose range (5 to 10 kGy) depending on the microbial load following airtight packaging showed a good chemical quality for 7 months of storage at $30{\pm}2^{\circ}C$ irrespective of relative humidity.

• Journal of Ginseng Research
• /
• v.32 no.4
• /
• pp.390-396
• /
• 2008

For evaluating the quality of ginseng, simple and fast analysis methods are needed to determine the ginsenoside content of the ginseng products. The aim of this study was therefore to optimize conditions for fast analysis of the ginsenosides, the active ingredients in extracts of Korean red ginseng. When tandem HPLC mass spectrometry (HPLC-MS/MS) was used, four forms of ginsenoside, Rb1, Rb2, Rc, and Re, were readily separated in seven minutes using a gradient mobile phase (acetonitrile and water containing acetic acid). This is the shortest separation time reported among the studies of major ginsenoside analysis. When gradient HPLC with UV detection was used, the detection limit was high, but separation of these four ginsenosides required 25 minutes using acetonitrile and water containing formic acid as a mobile phase. HPLC-MS/MS was able to separate ginsenoside Rg1 easily regardless of the mobile phase condition, but the HPLC-UV could not separate Rg1 because acetonitrile concentration in the mobile phase had to be maintained below 20%. Ginsenoside peaks were clearer and had more sensitive detection limits when Korean red ginseng extract was analyzed by the HPLC-MS/MS, but the UV detection was useful for chromatographic fingerprinting of all four major ginsenosides of the extract: Rb1, Rb2, Rc, and Re. Extracts were found to contain 2.17 mg, 1.51 mg, 1.29 mg, and 0.46 mg of ginsenoside Rb1, Rb2, Rc, Re, respectively, per gram weight. The ratios of each ginsenoside in the extracts were 1.0 : 0.7 : 0.6 : 0.2, respectively. Taken together, the results indicate that HPLC-MS/MS spectrometry could be the most useful method for rapid analysis of even small amounts of major ginsenosides, while HPLC with UV detection could also be used for rapid analysis of major ginsenosides and for quality control of ginseng products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.247-250
• /
• 1984

As a consecutive work on stability for the quality of ginseng products, the sorption properties of red ginseng (RG), red ginseng powder (RGP), and red ginseng powder tablet (RGPT) were studied in order to set the optimum moisture level for them. The levels of moisture at BET monolayer of RGP and RGPT ranged 5.97 to 7.27 % and 4.73 to 5.14 % in wet basis, respectively. Based on these values, the optimum moisture content for both of them would preferably be set at $6.7{\pm}0.7%$ and $4.9{\pm}0.2%$. From the results of storage study on microorganism growth under the maltreated condition, $40^{\circ}C$, and 75% RH, the optimum level of moisture for RG could be extended up to $14.0{\pm}0.5%$, which is much higher than the circulating values of 10.416%.

• Natural Product Sciences
• /
• v.17 no.2
• /
• pp.104-107
• /
• 2011

In order to facilitate the quality control of betaine from the fruits of Lycium chinense, we have developed a rapid and simple method for quantitative determination. Determination was achieved on a Discovery C18 column with an isocratic solvent system of 0.32% perfluoropentanoic acid aqueous-acetonitrile at a flow-rate of 0.5 mL/min and detected an ELSD. The method was reproducible with intra- and inter-day variations of less than 6% (R.S.D). The recoveries were in the range of 90.01~100.05%. The method turned out to be fast and simple, furthermore, to have a good selectivity and sensitivity for the quantity determination of betaine in the fruits of L.chinense.