• 제목/요약/키워드: geothermal

검색결과 1,195건 처리시간 0.032초

낭산일대에 분포하는 화강섬록암 암석자원의 열극체계 및 물리적 특성 (Fracture Pattern and Physical Property of the Granodiorite for Stone Resources in the Nangsan Area)

  • 윤현수;홍세선;박덕원
    • 암석학회지
    • /
    • 제16권3호
    • /
    • pp.144-161
    • /
    • 2007
  • 낭산지역 일대의 쥬라기 흑운모 화강섬록암은 담회색, 치밀조직을 이루는 중립질암이다. 암체에 대한 광역적인 열극체계 분석결과는 다음과 같다. 열극의 주향은 빈도등급에 의하여 크게 세 방향으로 분류가 가능하다. 이들 열극은 빈도등급에 의하여 (1) $N80^{\circ}{\sim}90^{\circ}E$ (1st-order)>(2) $N70^{\circ}{\sim}80^{\circ}E$ (2nd-order)>(3) $NS{\sim}N10^{\circ}E$ (3rd-order)의 순으로 나타난다. 특히 이들 열극의 간격은 200 cm 미만의 것들이 대부분을 차지한다. 따라서 분석된 열극체계 및 간격으로 미루어 낭산일대에서는 규격석보다 비규격석의 산출이 훨씬 많아 쇄석자원의 잠재성이 더 클 것으로 해석된다. 특히 밀집하는 기존 석산의 수직상 채석면의 방향도 빈도등급에 의하여 두 그룹으로 분류되어, (1) $N14^{\circ}W{\sim}N16^{\circ}E$ (1st-order)와 (2) $N78^{\circ}E{\sim}N88^{\circ}E$ (2nd-order)에서 뚜렷이 우세하다. 상기한 두 그룹의 수직상 채석면의 방향은 광역적 열극체계와는 다소 차이가 있다. 이와 같은 현상은 단위 석산에서 발달하는 미세균열의 배향성과 크게 관련되는 것으로 볼 수 있다. 낭산지역의 물성 중에서 비중, 흡수율, 공극률, 압축강도, 인장강도와 마모경도는 각각 2.65, 0.28%, 0.73%, $1,628kg/cm^2,\;100kg/cm^2$ 및 31의 평균값을 가진다. 공극률의 경우와는 달리, 낭산 및 속리산지역의 화강암류는 상호 유사한 마모경도를 가진다. 이는 마모저항의 지표로 간주되는 석영과 알칼리장석의 모우드 값의 차이로 설명될 수 있다. 한편 낭산지역의 연구를 통하여 규명된 수직상 채석면의 방향 및 각종 물성특성의 전반적인 이해는 차후 이 지역의 암석자원 활용 시주요 정보로 활용될 것으로 기대된다.

고해상도 항공자력탐사를 이용한 Italia Vulcano-Lipari 화산 복합체의 천부 지하 구조 (Shallow subsurface structure of the Vulcano-Lipari volcanic complex, Italy, constrained by helicopter-borne aeromagnetic surveys)

  • 대웅무웅;중총 정;구택정부;삼원광언;중야 준
    • 지구물리와물리탐사
    • /
    • 제9권1호
    • /
    • pp.129-138
    • /
    • 2006
  • 남부 Italia Aeolian 군도의 Vulcano-Lipari 화산 복합체의 천부 지하구조를 잘 이해하고 또한 이 지역의 화산활동을 모니터링하기 위해서 고해상도 항공자력탐사가 3 년간의 간격을 두고 두 번 수행되었다. 두 개의 서로 다른 자력탐사 자료가 화산활동의 변화를 지시하는 어떠한 의미있는 차이를 보이지 않기 때문에, 자료들은 서로 합쳐져서 단일 자료보다 넓은 영역에 대한 항공자력도로 만들어졌다. 지형보정된 자력이상으로부터 겉보기 자화강도 분포도가 만들어졌으며 이로부터 Fossa 원추구의 이질성을 제시하는 국부적인 고 자화 이상을 볼 수 있었다. 이중 세 개의 고자화 이상에 대해 자력 모델링이 수행되었다. 각 모델은 Fossa 화구의 화산쇄설류로 덮혀있는 화산생성물의 존재를 밝히는 데에 적용되었다. Fossa 화구 지역에 대한 모델로부터 현재 화구의 남쪽 가장자리에는 조면암질 용암류가 묻혀있다는 것이 제시되었다. Forgia Vecchia에서 적용한 자력모델은 수증기 폭발성 원추구가, Fossa 칼데라를 메운 레타이트질 용암류(현무암질조면암과 안산암질조면암을 통칭)에 덮혀버린 한 분출중심으로부터 형성되었다는 것을 제시해 준다. 하지만 용암류의 분포는 기존의 시추 결과들로부터 알려진 것보다도 적은 지역에 국한되는 것처럼 나타난다. 이는 Porto Levante에 인접한 지열지역에서 알 수 있듯이, 강렬한 열수활동으로 인한 용암류의 부분적인 변질에 기인한 것으로 설명될 수 있다. Fossa 원추구 북동부에서의 모델은 두꺼운 용암류가 Fossa 화산활동의 초기단계에 또 다른 분출중심에서 집적되어 있다는 것을 암시한다. 최근의 전기탐사는 마지막 두 자력모델 지역에서 고비저항대를 보여준다.를 재활성화 시키는 $CO_2$의 탄성파 반응 또한 예측될 수 있다. 이 논문에서는 암석물리학 모의실험장치를 적용했던 현장(해상과 육상의 잠재적 $CO_2$ 격리 지역)의 사례를 보여주고 있다. 4차원 탄성파 반응들이 모니터링 프로그램의 설계를 돕기 위하여 만들어 졌다. 액체상의 $CO_2$ 주입은 공기로 포화된 상태에 비해 속도-유효응력 반응을 평균 약 8% 정도 낮게 한다. 실험자료들은 높은 유효응력에서 Gassmann 계산들과 일치한다. 이러한 이론과 일치하는 "임계" 유효응력은 사암의 종류에 따라 달라진다. 이 차이는 각각의 사암 종류의 미세구조에서 미세 균열 수의 차이에 기인한 것이라 생각된다. 높은 유효응력에서의 이론과 의미있게 일치하였으며, $CO_2$ 주입 시 현장에서의 탄성파 거동을 예상하는데 있어서 어느 정도 확신을 준다.극압 증가의 최대 허용치를 결정하는데는 사용할 수 없다고 주장하고자 한다. 초기폐사율이 낮음을 확인할수 있었으며, 상기 결과를 토대로, 넙치 치어의 경우 ${\beta}-1,3$ 글루칸을 0.05% 이상 0.1% 미만을 사료에 첨가하는 것이 성장, 사료효율 증진, 항산화능 및 질병저항성에 가장 좋은 효과를 나타낼 수 있을 것을 사료된다./Cip1}(-)/p27^{kip1}(-)$인 경우는 미만형인 경우(87.0%)가 장형(54.9%)의 경우보다 많은 비율을 차지하였다(P<0.05). 5년 장기 생존율에 있어서는 각각의 $p21^{Waf1/Cip1}$$p27^{kip1}$의 발현 유무에 따른 통계적인 유의성은 없었고 복합

자연적 지하수 비소오염의 국내외 산출특성 (Characteristics of Natural Arsenic Contamination in Groundwater and Its Occurrences)

  • 안주성;고경석;이진수;김주용
    • 자원환경지질
    • /
    • 제38권5호
    • /
    • pp.547-561
    • /
    • 2005
  • 이 논문에서는 지하수 비소오염의 일반적 지구화학적 특성을 이해하고 기존 연구사례와 논산/금산지역의 지하수 관정 수질분석 자료 등을 바탕으로 국내 지하수의 비소 산출양상을 평가하고자 한다. 가장 심각한 비소오염이 발생한 방글라데시에서는 약 $28\%$의 관정에서 $50{\mu}g/L$ 이상의 비소함량이 확인되며 2천8백만의 인구가 이에 노출된 것으로 추정한다. 주요한 오염지하수의 특성으로 중성 pH와 중간 또는 강한 환원환경, 낮은 $SO_4^{2-}$, 및$\;NO_3^-$함량, 높은 용존 유기탄소, $NH_4^+$ 함량 등을 들 수 있으며 비소는 주로 3가 형태로 존재하고 홀로세 천부 대수층에서 함량이 높게 나타난다. 일반적으로 대수층내 철수산화물의 환원성 용해 현상으로 비소가 유출되는 것으로 받아들여지며 유기물질의 존재, 미생물의 활동 등이 주요한 요소로 평가된다. 플라이스토세 빙하활동에 의해 원거리 비소기원물질의 풍화 및 이동, 화학적 집적, 미생물 활동 등의 요인으로 광역적인 세계 주요 오염발생지역의 특성을 해석하기도 한다. 국내에서는 심각한 비소오염 발생사례는 보고되지 않고 있으며 지하수 수질측정망 운영결과 $10{\mu}sg/L$ 이상의 비소함량은 전체 $1\%$ 내외에서 나타나지만, 먹는샘물 수질평가에서 이를 초과하는 업체수가 $19.3\%$에 달하고 논산 및 금산 지역의 간이급수용 관정 수질조사에서 약 $7\%$가 초과하는 결과를 보였다. 전남 일부와 울산 지역의 지하수 수질조사 결과에서도 $10{\mu}g/:L.$ 이상의 함량이 각각 $36\%,\;22\%$에 달하여 변성퇴적암 등의 지질영향과 광화작용에 따른 비소오염이 발생할 수 있음을 보여준다. 향후 국내 지하수 비소오염 평가연구를 위하여 비소거동에 영향을 주는 다양한 지구화학적 및 미생물학적 반응과 지하수 유동특성에 대한 이해가 선행되어야 하며 광화대 지역, 옥천대 변성퇴적암 지역, 부산 경남 일대의 미고결 퇴적층 및 산성황산염 토양 분포지역 등에 대한 보다 체계적인 조사와 연구가 요구된다.

철/망간 산화물 피복제를 이용한 오염지하수에서의 As(III)제거 (Removal of As(III) in Contaminated Groundwater Using Iron and Manganese Oxide-Coated Materials)

  • 김주용;최윤형;김경웅;안주성;김동욱
    • 자원환경지질
    • /
    • 제38권5호
    • /
    • pp.571-577
    • /
    • 2005
  • 철산화물 피복 모래를 이용한 투수성 반응 벽체는 As(V)로 오염된 지하수의 처리에 매우 효과적인 것으로 알려져 있다 그러나 이 방법은 As(III)에 있어서는 그 제거효과가 제한적인 실정이다. 본 연구에서는 위 방법에 의한 3가 비소제거의 한계를 극복하기 위해서 As(III)를 As(V)로 산화시킬 수 있는 능력을 가진 망간산화물 피복 물질을 비소저감 촉진제로서, 철산화물 피복 물질을 이용한 처리 기법에 함께 적용하였다. 철산화물 피복 모래와 망간산화물 피복 모래를 함께 이용한 비소제거 방법으로서, 순차 제거법과 동시 제거법이 연구되었다. 두 가지 처리 방법 모두 6시간동안 $85\%$ 이상의 높은 비소제거 효율을 보였으며, 처리과정 동안 흡착제 표면의 철이나 망간의 용해에 의한 2차적인 오염도 일어나지 않았다. 그러나, 동시 제거법은 비소 저감 후 처리수의 산성도를 pH 6.0의 중성상태로 유지하는 반면, 순차 제거법은 처리수를 pH 4.5의 산성상태로 변화시키는 작용을 일으켜, 음용수로서의 이용을 위한 오염 지하수의 비소 저감법으로는 동시 제거법이 적합한 것으로 판정되었다. 보다 높은 As(III) 제거 효과를 위해, 망간 및 철산화물을 폴리프로필렌 섬유에 피복시켜 비소제거에 적용하였다. 폴리프로필렌 섬유는 높은 표면적과 낮은 비중의 특성을 가진, 신축성 있는 스폰지와 같은 저렴한 중합체의 일종이다. 이를 이용한 비소 제거법은 피복모래를 이용한 방법보다 월등히 뛰어난 $99\%$ 이상의 높은 비소제거 효율을 나타내었다. 또한, 피복 폴리프로필렌 섬유를 이용한 방법은 비소에 오염된 물의 음용수로의 이용을 위한 간편한 처리기법으로서 적용하기에 좋은 많은 실용적인 장점들을 가지고 있다.

신재생에너지 부문의 경제적 파급효과 분석 (The Economic Effects of the New and Renewable Energies Sector)

  • 임슬예;박소연;유승훈
    • 에너지공학
    • /
    • 제23권4호
    • /
    • pp.31-40
    • /
    • 2014
  • 국제적인 온실가스 감축 논의에 대한 구체적인 대응방안의 하나로, 우리나라는 2035년까지 신재생에너지 보급률 11% 달성을 목표로 하는 제2차 에너지기본계획을 수립하였다. 국내 신재생에너지 부문은 8개 분야 재생에너지(태양열, 태양광발전, 바이오매스, 풍력, 소수력, 지열, 해양에너지, 폐기물에너지)와 3개 분야 신에너지(연료전지, 석탄액화가스화, 수소에너지) 등 총 11개 분야로 구성되어 있다. 신재생에너지 보급 확대를 위한 정부와 민간의 투자가 늘어나면서, 신재생에너지 부문의 경제적 파급효과를 규명할 필요성도 증가하고 있다. 이에 본 논문에서는 가장 최근에 발표된 2012년도 산업연관표를 이용한 산업연관분석을 적용하여 신재생에너지 부문의 경제적 파급효과를 분석하고자 한다. 먼저 수요유도형 모형을 이용하여 신재생에너지 부문의 생산유발효과, 부가가치 유발효과, 취업유발효과를 분석한다. 둘째, 공급유도형 모형을 활용하여 공급 지장효과를 살펴본다. 마지막으로 레온티에프 가격모형을 통해 물가파급효과를 도출한다. 분석결과는 다음과 같이 된다. 첫째, 신재생에너지 부문의 1원 생산 또는 투자는 2.1776원의 생산과 0.7080원의 부가가치를 유발한다. 아울러 신재생에너지 10억원 생산 또는 투자의 취업유발효과는 9.0337명이다. 둘째, 신재생에너지 부문의 1원 공급지장으로 인한 국민경제 전체적인 생산 차질액은 1.6314원으로 분석되어 그 값이 작지 않았다. 셋째, 신재생에너지 부문 산출물의 가격이 10% 오를 때의 국민경제 전체적인 물가파급효과는 0.0123%로 작은 편이다. 이상의 정량적 정보는 신재생에너지 부문의 생산 및 투자 확대의 경제적 파급효과를 사전적으로 예측하는 데 중요한 정보로 활용될 수 있다.

울산광산산(蔚山鑛山産) 유비철석(硫砒鐵石)의 조성변화(組成變化) 및 지질온도계(地質溫度計)에 대(對)한 적용(適用) (Compositional Variation of Arsenopyrites in Arsenic and Polymetallic Ores from the Ulsan Mine, Republic of Korea, and their Application to a Geothermometer)

  • 최선규;정재일;이마이 나오야
    • 자원환경지질
    • /
    • 제19권3호
    • /
    • pp.199-218
    • /
    • 1986
  • 울산(蔚山)의 철 중석 스카른광상에서 산출되는 유비철석(硫砒鐵石)은 그의 산출상태(産出狀態) 광물공생관계(鑛物共生關係) 화학조성(化學組成)을 근거로 세 가지 유형으로 구분된다. 유비철석(硫砒鐵石) I 은 다금속광화작용(多金屬鑛化作用) 초기에 정출된 것으로 주로 스카른대 내에서 산점상으로 분포하며, Ni-Fe-Co계 유화물과 밀접한 공생관계를 보여준다. 유비철석(硫砒鐵石) I 의 화학조성은 Ni, Co의 함량이 현저하게 높고 As/S(원자비(原子比))>1으로 과잉(過剩)의 비소를 함유한다. 유비철석(硫砒鐵石) II는 Cu 또는 As 광석중에서 산출되며, 비독사석 휘창연석 비스무스 황동석 섬아연석과 밀접한 공생관계를 보여준다. 유비철석(硫砒鐵石) II의 화학조성은 Ni, Co의 함량이 극히 미량이며, As/S>1으로 과잉(過剩)의 비소를 함유한다. 유비철석(硫砒鐵石) III은 최후기 열수광맥 형성시기에 정출되었으며, 황철석 방연석 섬아연석 자류철석과 밀접한 공생관계(共生關係)를 보여준다. 유비철석(硫砒鐵石) III의 화학조성(化學組成)은 $$As/S1{\leq_-}1$$로 과잉(過剩)의 S를 함유한다. 유비철석(硫砒鐵石) I 은 Ni, Co의 함유량이 1%이상이므로 지질온도계(地質溫度計)로 사용할 수 없지만, 유비철석(硫砒鐵石) II 는 비스무스-휘창연석의 공생관계(共生關係)를 보여 주고 있으므로, 이를 Kretschmar and Scott (1976)에 의한 $1/T-f(S_2)$도에 적용시켜보면 유비철석(硫砒鐵石) II의 정출환경은 $T=460{\sim}470^{\circ}C$, log $f(S_2)=-7.4{\sim}7.0$이고, 유비철석(硫砒鐵石) III의 정출환경은 $T=320{\sim}440^{\circ}C$, log $f(S_2)=-9.0{\sim}7.0$으로 추정된다.

  • PDF

설비공학 분야의 최근 연구 동향 : 2009년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2009)

  • 한화택;이대영;김서영;최종민;백용규;권영철
    • 설비공학논문집
    • /
    • 제22권7호
    • /
    • pp.492-507
    • /
    • 2010
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

옥천화강암과 보은화강암 관입에 의한 접촉변성작용 (The Contact Metamorphism Due to the Intrusion of the Ogcheon and Boeun granites)

  • 오창환;김창숙;박영도
    • 암석학회지
    • /
    • 제6권2호
    • /
    • pp.133-149
    • /
    • 1997
  • 옥천화강암 주변의 변성니질암에서는 관입체에 가까워 지면서 변성정도가 흑운모대에서 홍주석대를 거쳐 규선석대로 증가한다. 그리고 보은화강암 남서부 주변 변성염기성암에서는 관입체에 가까워지면서 녹색편암상-각섬암상 점이대에서 각섬암상대를 거쳐 상부각섬암상대로 변성정도가 증가한다. 보은화강암 근접부인 도이리 부근에서 규선석과 홍주석을 포함하는 광물군이 화강암 경계부로부터 500m 이내에 위치한 변성니질암에서 관찰된다. 이러한 연구결과는 보은화강암과 옥천화강암이 주변지역에 저압형의 접촉 변성작용을 야기시켰음을 지시한다. 옥천화강암 주변에서 석류석을 포함하는 홍주석대 시료로부터 계산된 온도-압력 조건은 $540{\pm}40^{\circ}C, 2.8{\pm}0.9$ kb이며 보은화강암 주변 상부각섬암상대의 변성염기성암으로부터 추정된 접촉변성 작용시의 온도는 $698{\pm}28^{\circ}C$이다. 보은화강암 주변의 변성염기성에서 나타나는 각섬석과 사장석의 성분은 매우 넓은 범위를 갖는데 이는 각섬석과 사장석의 불혼합구간과 불완전한 변성반응에 의해 잔류된 불안정한 성분에 기인한다. 변성정도가 증가하면서 안정된 각섬석과 사장석의 성분범위는 불혼합구간의 소멸에 의해 줄어든다. 보은화강암과 옥천화강암에 의한 접촉변성 작용시 주변암에 야기된 열적변화는 2차원의 유한차분법을 이용한 CONTACT2 프로그램을 이용하여 이론적으로 계산되었다. 이론적인 계산을 위해 보은화강암의 경우 화강암의 변의 길이가 20 km인 삼각형을 그리고, 옥천화강암의 경우 지름이 10 km인 원을 관입형태로 가정하였다. 이론적인 계산결과를 화강암 주변의 변성암에서 계산된 결과와 비교하여 보면 예상되는 관입온도는 옥천화강암 경우는 $800^{\circ}C$ 그리고 보은화강암의 경우는 $1000^{\circ}C$ 보다 높았을 것으로 추정된다. 하지만 옥천 및 화강암 관입시기에 연구지역의 지온 상승률이 일반 대륙지각에서의 지온 상승률보다 높았을 경우 관입온돈느 $800^{\circ}C$$1000^{\circ}C$ 보다 낮을 수 있다.

  • PDF

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

공기조화, 냉동 분야의 최근 연구 동향 -2004년 및 2005년 학회지 논문에 대한 종합적 고찰- (Recent Progress in Air Conditioning and Refrigeration Research - A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2004 and 2005 -)

  • 최영돈;강용태;김내현;김만회;박경근;박병윤;박진철;홍희기
    • 설비공학논문집
    • /
    • 제19권1호
    • /
    • pp.94-131
    • /
    • 2007
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.