• 한국지반공학회논문집
• /
• 제36권6호
• /
• pp.35-46
• /
• 2020

액상화 구성모델의 입력변수는 실내외 실험 등을 통해 지반 및 하중 조건에 적합한 값을 결정하는 것이 중요하지만, 설계 실무에서는 시험수행의 어려움 등으로 입력변수의 결정 및 해석결과의 검증이 어려웠다. 본 연구에서는 반복 직접전단시험에 대한 수치모델링을 수행하여 액상화 구성모델 중 Finn 모델과 PM4Sand 모델의 적용성을 분석하였다. 그 결과, Finn 모델은 과잉간극수압의 최대값 도달시점은 모사할 수 있었지만 항복 이후의 과잉간극수압 응답 및 응력-변형률 거동을 모사하는데 한계가 있었다. 이에 반해, PM4Sand 모델은 액상화 도달시점 및 및 액상화 이후의 응력-변형률 거동을 잘 모사할 수 있었다. 최종적으로, 설계조건에 맞는 액상화 저항전단응력비 CRR을 모사할 수 있는 액상화 모델의 입력변수 산정절차를 제안하고 PM4Sand 모델의 입력변수를 산정하는 간편식을 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.167-174
• /
• 2000

Profiles of discontinuities through scanline method were investigated for the analysis of rock slope stability. Lower hemispheric projection method was used to evaluate the geometric stability and failure potential of these discontinuities. Also, safety factor was evaluated for the discontinuities of failure potential using by limit equilibrium analysis. Then, displacements of rock block due to the discontinuities were displayed by using the program UDEC(Universal Distinct Element Code) which applied the Distinct Element Method. When we determine the cut-slope in design, the characteristics of discontinuities is not represented only by strength parameters of intact rock. Therefore it is more reasonable method in assuring stability that first, construction would be preceded by the cut-slope of preliminary design, and then, cut-slope would be redetermined by elaborate site investigation in processing construction.

• Structural Engineering and Mechanics
• /
• 제29권6호
• /
• pp.603-622
• /
• 2008

This work deals with the design optimization of tuned mass damper (TMD) devices used for mitigating vibrations in high-rise towers subjected to seismic accelerations. A stochastic approach is developed and the excitation is represented by a stationary filtered stochastic process. The effectiveness of the vibration control strategy is evaluated by expressing the objective function as the reduction factor of the structural response in terms of displacement and absolute acceleration. The mechanical characteristics of the tuned mass damper represent the design variables. Analyses of sensitivities are carried out by varying the input and structural parameters in order to assess the efficiency of the TMD strategy. Variations between two different criteria are also evaluated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.57-68
• /
• 1999

This paper summarizes the results of a study which uses the recently developed Optical Profile Microscopy technique (Dove and Frost, 1996) as the basis for investigating the role of geomembrane surface roughness on the shear mechanism of geomembrane/geotextile interfaces. The alternative roughness parameters which consider the direction of shearing are described. These directional parameters are compared with the existing roughness parameters, and the relationship between these directional and non-directional parameters are investigated. Then, the relationship between interface shear strength and surface roughness quantified at the interface is investigated. The results show that interface friction can be quantitatively related to the surface roughness of the geomembrane. The peak and residual interface strengths increase dramatically through the use of textured geomembranes as opposed to smooth geomembranes. For the smooth geomembranes, the sliding of the geotextile is the main shear mechanism. For the textured geomembranes, the peak interface strength is mainly mobilized through the micro-texture of the geomembrane, however, the residual interface strength is primarily attributed to macro scale surface roughness which pulls out and breaks the filaments from the geotextile. The results of this study can be extended to the other interfaces such as joints in rock mass, and also can be used to provide a quantitative framework that can lead to a significantly improved basis for the selection and design of geotextiles and geomembranes in direct contact.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.551-561
• /
• 2006

Incheon bridge project is to construct total 12km long bridges on the sea consist of 800m span length cable stayed bridge, approach bridge and viaduct bridge based on LRFD design specification. To design pile foundations by RCD of each bridge unit, total 4 number of preliminary full scale pile load tests with Osterberg cell method were carried out on the piles for testing. The test load was planned to more than the expected design ultimate capacity and about 29,000tons maximum load was recorded. From the interpretation of test results, design parameters are evaluated and applied to the design. Preliminary pile load test plan and detailed execution of pile load tests are introduced and summarized. The resistance factors are presented for pile design of Incheon Bridge Project in LRFD considering variation of ground conditions and number of test piles.

• Geomechanics and Engineering
• /
• 제38권6호
• /
• pp.553-569
• /
• 2024

In recent tunneling projects, encounters with multi-layered strata have become more frequent as the desired scale of tunneling increases. Despite substantial practical experience, the design of large-diameter shield-driven tunnels often simplifies the surrounding ground as uniform, overlooking the complexities introduced by non-uniform geotechnical factors. This study comparatively analyzed the influence of design factors, particularly segment stiffness and joint parameters, on segmental lining behavior in layered ground conditions using numerical methods. A comprehensive parametric study revealed the significant impact of deformative interaction between the lining and the soft top soil layer on overall tunnel behavior. Permitting lining deformation in the soft soil layer effectively mitigated the induced internal forces but resulted in considerable tunnel lining convergence, adopting a peanut-shaped appearance. From a practical design perspective, application of a soft segment with lower stiffness near the stiff soil layer is an economically advantageous approach, alleviating internal forces within an acceptable convergence level. Notably, around the interfaces between soil layers with different stiffnesses, the induced internal forces in the lining were minimized based on joint rotational stiffness and location. This indicates the possibility of achieving an optimal design for segmental lining joints under layered ground conditions. Additionally, a preliminary design method was proposed, which sequentially optimizes parameters for joints located near soil layer interfaces. Subsequently, a specialized design based on the proposed method for complex multi-layered strata was compared with a conventional design. The results confirmed that the internal force was effectively relieved at an allowable lining deflection level.

• 문화기술의 융합
• /
• 제6권2호
• /
• pp.467-472
• /
• 2020

일반적인 보통 등급의 지반(ground) 상 구조물의 안정성 확보를 위한 설계입력정수(input-parameters) 도출방법들은 보편적으로 잘 알려져 있다. 연구지역과 같은 습곡된(folded) 변성암(metamorphic rocks) 지반은 엽리가(foliation) 촘촘히 발달해 있고, 엽리에 평행한 소규모 단층들(faults)이 분포하고 있어 설계입력정수 도출을 위한 특별한 조사방법 및 시험, 등이 요구된다. 수 mm 간격의 엽리가 발달한 변성암 지반은 엽리면 직접전단강도시험(direct shear test), 엽리의 배향(strike/dip)과 맵핑(mapping), 엽리의 지하 연속성 파악을 위한 시추조사, 변성암반의 암반분류(rock mass rating), 등이 필요하다. 특정 엽리면을 따라 발달한 소규모의 엽리평행단층(foliation-parallel faults)이 다수 발달한 지반은 선구조선 분석, 단층 추적을 위한 지표지질맵핑, 단층면 직접전단강도시험, 등이 필수적이다. 습곡지반은 지질구조구(structural domain) 분석, 불연속면의 평사투영(stereonet)해석, 습곡축을 따른 전기비저항탐사, 등의 추가조사로 설계입력정수 도출이 합리적이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1427-1439
• /
• 2008

The quality of track-bed fills of railways has been controlled by field measurements of density (${\gamma}_d$) and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures is that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of $OMC{\pm}2%$ as well as the p-wave velocity.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.182-187
• /
• 2010

In the various fields of Civil Engineering, shear modulus is very important input parameters to design many constructions and to analyze ground behaviors. In general, a shear wave velocity profile is decided by various experiments before constructing a structure and, analysis and design are carried out by using decided shear wave velocity profile of the site. However, if civil structures are started to construct, the shear wave velocity will be increased more than before constructions because of confining pressure increase by the load of structure. The evaluation of the change in shear wave velocity profile is used very importantly when maintaining, managing, reinforcing and regenerating existing structures. In this study, a non-destructively geotechnical investigation method by using the HWAW method is applied to an evaluation of change in properties of the site according to construction. Generally, the space for experiments is narrow when underground of existing or on-going structures is evaluate, so a prompt non-destructive experiment is required. This prompt non-destructive experiment would be performed by various in-situ seismic methods. However, most of in-situ seismic methods need more space for experiments, so it is difficult to be applied. The HWAW method using the Harmonic wavelet transforms, which is based on time-frequency analysis, determines shear wave velocity profile. It consists of a source as well as short receiver spacing that is 1~3m, and is able to determine a shear wave velocity profile from surface to deep depth by one test on a space. As the HWAW method uses only the signal portion of the maximum local signal/noise ratio to determine a profile, it provides reliability shear modulus profile such as under construction or noisy situation by minimizing effects of noise from diverse vibration on a construction site or urban area. To estimate the applicability of the proposed method, field tests were performed in the change of geotechnical properties according to constructing a minimized modeling bent. Through this study, the change of geotechnical properties of the site was effectively evaluated according to construction of a structure.

• 한국지반공학회논문집
• /
• 제26권2호
• /
• pp.45-54
• /
• 2010

본 논문에서는 동반논문에서 구축된 수치해석 모델을 이용하여 SCW의 성능을 평가하기 위한 매개변수연구를 수행하였다. 매개변수연구에는 공극률, 투수계수, 열전도도, 비열, 지열경사 등 5개의 지반환경변수와 유량, 심정심도, 심정직경, 유입관 직경, 블리딩율의 설계변수가 적용되었다. 수치해석은 24시간 연속가동과 가동 중지를 반복하는 14일간의 가동 두 가지로 수행되었다. 해석결과 SCW 성능에 중요한 영향을 미치는 변수는 열전도도, 수리전도도, 지열경사, 유량, 심정 심도, 블리딩율인 것으로 나타났다. 열전도도가 높을수록 SCW의 효율이 향상되는 것으로 나타났다. 지열경사가 클수록 심정 저부의 온도가 증가하여 난방모드에서는 효율이 향상되지만, 냉방모드에서는 유입수의 온도가 증가하여 오히려 효율이 감소하는 것으로 나타났다. 수리전도도도는 $10^{-4}m/s$ 이상일 경우에는 큰 영향을 미칠 수 있으나 $10^{-6}m/s$ 이하에서는 영향이 적은 것으로 나타났다. 심정심도가 증가할수록 SCW의 효율이 향상되는 것으로 나타났지만 심정심도를 높일수록 시공비가 증가하게 된다. 블리딩을 적용하며 추가적인 비용 없이 심정온도를 조절할 수 있으며 성능을 향상시킬 수 있는 매우 효과적인 방법인 것으로 나타났다. 단, 블리딩은 유출수를 배출할 공간이 확보되며 지하수량이 풍부한 경우에만 적용할 수 있다. 본 매개변수 연구결과, SCW의 성능에 영향을 미치는 요소는 매우 다양하며 이들의 복합적인 영향을 정확하게 규명하기 위해서는 수치적 모델을 수행해야 할 필요가 있는 것으로 나타났다.