• 대한설비공학회지:설비저널
• /
• 제17권3호
• /
• pp.238-248
• /
• 1988

The flow pattern inside the power condenser is generally known to be very complicated due to the phase change and turbulence effects as well as the effect of condenser geometry. In the present study, the flow pattern inside the power condenser was numerically simulated with a personal computer. The widely known CHAMPION 2/E/FIX(Concentration, Heat and Momentum Program Instruction Outfit, 2D/Elliptic/Fixed grid) computer code was modified for this purpose. The flow was asssumed to be two-dimensional and steady-state, and the tube bank was considered to be homogeneous porous medium. Simple turbulent diffusion coefficients based on the appropriate experiments were obtained for the computation. Through this analytical approach, the flow pattern could be predicted fairly well. The computational results also show that the location of the air vent plays an important key role in determining the efficiency of the condenser.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.505-514
• /
• 1998

Flow pattern of air-water two phase flow depends on the conditions of pressure void fraction and channel geometry. We classify the flow pattern by measuring the output signal of the conductivity probe. under the classified flow pattern we mount a visualization equipment on the test section and take pictures. We vary the concentration of pure solvent and polymer to measure local void fraction. We know that the maximum point position of local void fraction distribution move from the center of the pipe to the wall of the pipe as JSL increase when JSA is constant in two phase flow. But we find that the maximum point position of local void friction move from the wal of the pipe to the center of the pipe when polymer concentration increase.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.139-146
• /
• 2004

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behavior of the materials during indentation scratch test was studied with numerical method by ABAQUS S/W. Brittle materials (Si, Pyrex glass 7740) were used as specimens, and forming conditions to reduce the elastic recovery and pile-up were proposed. The indenter was modeled as a rigid surface. Minimum mesh sizes of specimens are 1-l0nm. Variables of the nanoindentation scratch test analysis are scratching speed, scratching load, tip radius and tip geometry. The nano-indentation scratch tests were performed by using the Berkovich pyramidal diamond indenter. Comparison between the experimental data and numerical result demonstrated that the FEM approach can be a good model of the nanoindentation scratch test. The result of the investigation will be applied to the fabrication of the hyper-fine pattern.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.663-673
• /
• 2007

This paper presents a new moving obstacle detection method using an optical flow in mobile robot with an omnidirectional camera. Because an omnidirectional camera consists of a nonlinear mirror and CCD camera, the optical flow pattern in omnidirectional image is different from the pattern in perspective camera. The geometry characteristic of an omnidirectional camera has influence on the optical flow in omnidirectional image. When a mobile robot with an omnidirectional camera moves, the optical flow is not only theoretically calculated in omnidirectional image, but also investigated in omnidirectional and panoramic images. In this paper, the panoramic image is generalized from an omnidirectional image using the geometry of an omnidirectional camera. In particular, Focus of expansion (FOE) and focus of contraction (FOC) vectors are defined from the estimated optical flow in omnidirectional and panoramic images. FOE and FOC vectors are used as reference vectors for the relative evaluation of optical flow. The moving obstacle is turned out through the relative evaluation of optical flows. The proposed algorithm is tested in four motions of a mobile robot including straight forward, left turn, right turn and rotation. The effectiveness of the proposed method is shown by the experimental results.

• 한국컴퓨터정보학회논문지
• /
• 제12권6호
• /
• pp.147-152
• /
• 2007

디지털 영상에서의 얼굴탐색은 얼굴인식을 위한 기본 단계이면서 인식 성능에 큰 영향을 미치는 중요한 처리 단계이다. 템플릿 정합 방식의 객체 검출방식에서 사용되어 얼굴 인식 등에서 좋은 성능을 보이는 Hausdorff 거리는 주어진 점의 집합들 사이에서 기하학적 유사도만을 고려한 측도이므로 원래의 영상이 포함하고 있는 다른 정보들을 추가적으로 이용함으로 효율을 높일 수 있다. 이러한 점에 착안하여 본 논문에서는 점들 사이에 서로 다른 정도를 측정하기 위해서 거리뿐만 아니라 점들 주위의 국지적 계조패턴 정보까지 포함하는 측도를 정의함으로써 보다 정밀한 템플릿 정합결과를 얻는 방법을 제안한다.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.69-80
• /
• 2015

A series of numerical analyses was conducted to predict the thermal performance of a solar air heater depending on the hole configuration and geometry in the absorber plate. The planar dimensions of the prototype were 1 m (W) by 1.6 m (H), and the maximum air flow considered was $187m^3/h$. It was considered that protruding holes with a triangular opening in the absorber plate would invoke turbulence in the air flow to enhance the convection heat transfer. Six different hole configurations were investigated and compared with each other, while the hole opening height was considered as a design variable. Three-dimensional transient analyses were performed with a commercial software package on the airflow and heat transfer in the model. The numerical results were analyzed and compared from the view point of the outlet air temperature and its time response to derive the optimal hole pattern and hole opening height.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1053-1060
• /
• 2011

본 연구는 이상적인 원형 환(Ideal Circular Ring) 스텐트와 Intertwined 스텐트의 삽입에 의해 야기 되는 혈류유동 형태와 스텐트 표면에서 방출되는 약물의 농도분포를 조사하는 것이다. 본 연구를 통해 Intertwined 스텐트의 스텐트 사이 영역에서 약물농도는 원형 환 스텐트에 비해 더 많이 분포해 있는 것을 알 수 있었다. 주어진 스텐트의 형상에 대하여 스텐트 사이 영역에서의 국소적인 약물 농도분포는 레이놀즈 수가 증가함에 따라 감소하는 것으로 나타났다. 주어진 레이놀즈 수에 대하여는 약물 농도분포는 스텐트의 형상과는 비교적 무관함을 알 수 있다. 원형 환 스텐트보다 Intertwined스텐트가 스텐트사이 영역과 스텐트 하류영역에서혈관 벽면을 따른 약물 농도분포는 크게 나타나는 것을 볼 수 있다.

• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.43-50
• /
• 2002

The purpose of this study is to find the types and symbolic meanings of the pattern shown in the Korean traditional houses. The major findings were as follows, 1) The patterns shown in the Korean traditional houses are classified into the types of the animal, plant, good-luck geometry according to the Motifes 2) The patterns of the Korean traditional houses were expressed in the fences, gates, chimneies, walls, windows and doors, railings, roofs. 3) Korean traditional patterns are expressed the meanings of the protection, long life, good-luck, good meaning, decoration in the fences, gates, chimneies, walls, windows and doors, railings, roofs.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.89-97
• /
• 2011

Furniture design is no exception to human desire for pursuit of the nature. In various design fields, it has turned out nature-decorative method in the past, and also recently it has turned out bio-adaptive method which is more root design process using principal of generation in nature world. The purpose of this study is to analyze application methods and characteristics of fractal geometry and voronoi diagram which are most representative principals of generative design in nature by research on the example of furniture design using these principals. The results of having analyzed fumitures by generative design can be summarized as follows; design principals of fractal; superposition, scaling, repetition & gradation, deformation, distortion and voronoi diagram; individual speciation, variational patten, repetition gradation, ambiguous boundary create new design concept and emergent form in furniture design. Application methods are 'form emergence by algorithm', 'conventional process based on principals of generative design', and 'reproduction of pattern from generative design'. Biological reinterpretations and new explorations of principals of nature generation offer unbounded possibilities for furniture design.

• 패션비즈니스
• /
• 제7권5호
• /
• pp.17-31
• /
• 2003

$Premi\grave{e}re$ Vision is a leading textile collection held since 1973. In this study, textiles for 2004/05 F/W season in $Premi\grave{e}re$ Vision were analyzed at the various point of view, such as general trend, sub-theme, fiber content, color trend, structure, yarn trend, pattern, texture, decoration, finishing and other technical treatment, and functionality. There were three general trends; natural/ecology, geometry, and combination. Natural color and texture were widely used over the fabric exhibited, and irregularities expressed the natural trend of textiles. Geometric patterns were used for knit as well as for woven. Geometry expressed by various methods such as weaving, knitting, printing, shearing, embossing, and etc. However, geometry shown in this season was not a clear form expressed by weaving, but a blurry, irregular form expressed by various other methods such as knitting. The combination among heterogeneous fibers, yarns, colors, images, and textures was usual, however, the harmony among them was accomplished.