• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.584-590
• /
• 2015

Objectives: The purpose of this study was to evaluate quartz concentrations in airborne total and respirable dusts. Materials: Respirable dust samples were collected using a 10 mm aluminum cyclone equipped with a 37 mm$5{\mu}m$ pore size PVC filter. Total dust samples were collected with a three stage cassette from three work sections at earthwork sites located in the South Chungcheong-do Province area. Results: The geometric means of quartz concentrations were $0.008mg/m^3$ and $0.004mg/m^3$ in total dust and respirable dust, respectively. The geometric means of quartz contents analyzed by FTIR were 3.74% in total dust and 3.16% in respirable dust. The geometric mean of quartz concentrations and contents in secondary blasting operations were higher than those in other operations. Conclusions: Given that secondary blasting operations had higher quartz concentrations, there is a need to reduce respirable dust, such as through wet operations.

• 응용통계연구
• /
• 제19권3호
• /
• pp.447-460
• /
• 2006

본 연구에서는 확률모형의 모수로부터 얻어지는 여러 형태의 함수간의 크기를 다중 비교 하는 방법을 제안하고자 한다. 이 방법은 비교대상인 모수 함수 간의 선호확률을 베이지안 방법으로 추정하고, 이들로부터 얻어지는 선호행렬을 이용한 새로운 다중비교법이다. 이러한 방법의 제안에 필요한 이론과 비교기준을 고안하였으며, 응용 예로 제안된 방법을 s의 독립인 지수분포 모수의 기하평균 크기 비교에 적용하였다.

• 한국환경보건학회지
• /
• 제26권2호
• /
• pp.108-115
• /
• 2000

The mass fraction of PM10 had a bimodal distribution in the middle of between 2.1 ${\mu}{\textrm}{m}$, and the average mass fraction of particles less than 2.1~3.1 ${\mu}{\textrm}{m}$ was 54.1% for Pb and 890.8 ng/㎥ for Fe, respectively. For the concentration of PM10 and metallic elements by seasonal variation, PM10 showed bimodal distribution, while metallic elements showed different distributions by their sources. The ratios of fine particles to total mass were 0.45 for PM10, 0.41 for Cr, and 0.20 for Fe, 0.57 for Zn, 0.68 for Cd and 0.63 for Pb, respectively. That facts indicated that PM10, Zn, Cd, Cr and Pb were from anthropogenic sources, and Fe was from natural source. The geometric means and geometric standard deviations by seasonal variations were 3.6 ${\mu}{\textrm}{m}$ , 2.31 ${\mu}{\textrm}{m}$ in winter, 3.0 ${\mu}{\textrm}{m}$ , 2.49 ${\mu}{\textrm}{m}$ in spring, 2.7 ${\mu}{\textrm}{m}$ , 2.03 ${\mu}{\textrm}{m}$ in summer respectively. And, total efficiency of cascade impactor by seasonal variations were 49.6% in winter, 45.9% in spring and 44.5% in summer.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.161-170
• /
• 2022

Three-dimensional (3D) geometric models are introduced to correct vignetting, and a downhill simplex search is applied to determine the coefficients of a 3D model used in digital microscopy. Vignetting is nonuniform illuminance with a geometric regularity on a two-dimensional (2D) image plane, which allows the illuminance distribution to be estimated using 3D models. The 3D models are defined using generalized polynomials and arbitrary coefficients. Because the 3D models are nonlinear, their coefficients are determined using a simplex search. The cost function of the simplex search is defined to minimize the error between the 3D model and the reference image of a standard white board. The conventional and proposed methods for correcting the vignetting are used in experiments on four inspection systems based on machine vision and microscopy. The methods are investigated using various performance indices, including the coefficient of determination, the mean absolute error, and the uniformity after correction. The proposed method is intuitive and shows performance similar to the conventional approach, using a smaller number of coefficients.

• Earthquakes and Structures
• /
• 제25권6호
• /
• pp.469-479
• /
• 2023

A probabilistic seismic damage analysis is an essential procedure to identify seismically vulnerable structures, prioritize the seismic retrofit, and ultimately minimize the overall seismic risk. To assess the seismic risk of multiple structures within a region, a large number of nonlinear time-history structural analyses must be conducted and studied. As a result, each assessment requires high computing resources. To overcome this limitation, we explore a deep learning-based metamodel to enable the prediction of the mean and the standard deviation of the seismic damage distribution of track-on steel-plate girder railway bridges in Korea considering the geometric variation. For machine learning training, nonlinear dynamic time-history analyses are performed to generate 800 high-fidelity datasets on the seismic response. Through intensive trial and error, the study is concentrated on developing an optimal machine learning architecture with the pre-identified variables of the physical configuration of the bridge. Additionally, the prediction performance of the proposed method is compared with a previous, well-defined, response surface model. Finally, the statistical testing results indicate that the overall performance of the deep-learning model is improved compared to the response surface model, as its errors are reduced by as much as 61%. In conclusion, the model proposed in this study can be effectively deployed for the seismic fragility and risk assessment of a region with a large number of structures.

• 치과방사선
• /
• 제21권2호
• /
• pp.415-423
• /
• 1991

This study was performed to evaluate the geometric standardization of periapical intraoral radiography. Image distortion was measured by analysing serial radiography obtained from dry skull using 5 types of bite registration device. After 16 weeks, the angular distortion of Pattern resin was 0.26±0.14 degree(Horizontal angle 0.17±0.14, Vertical angle 0.16±0.11) which was the lowest among the 5 registration device, and that of putty type Exaflex was 0.49±0.35 degree(Horizontal angle 0.42±0.35, Vertical angle 0.17±0.13) which was the highest. The mean amount of distortion variance of Tooth shade acrylic at each experimental period was 0.06±0.08 which was the lowest among the 5 registration device, and that of XCP alone was 0.ll±0.13 which was the highest.

• 응용통계연구
• /
• 제27권1호
• /
• pp.115-122
• /
• 2014

이 논문에서는 이진확률수열의 무작위성을 검정하는 방법을 제안한다. 연의 길이는 절사된 기하분포를 따르는데 제안하고자 하는 검정통계량은 연의 평균길이를 기초로 하고 있으며 표본크기가 커지면 점근적으로 ${\chi}^2_2$-분포를 따른다. 검정크기와 검정력을 비교하기 위해 몬테칼로모의실험을 실시했다. 로또 6/45에서의 추첨여부에 대한 수열에 적용해 보았으며 로또는 무작위성을 만족하는 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1139-1147
• /
• 2000

This paper describes that the size of inactive zone can be directly applied to design multiblade fan/scroll system. From the experimental studies using a five hole pitot tube and smoke test, it is found that the size of inactive zone has linear relations with the mean velocity of impeller inlet and cut-off angle gives a great influences to the fan efficiency. For the practical design, a function related with geometric parameters(i.e. inner radius, cord length, cut-off clearance and cut-off angle) of fan/scroll system is suggested. By using these formulas, the size and distribution of inactive zone can be predicted without the measurements through the full domain, it can be possible to use them to know the efficiency improvement for new model designed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1037-1049
• /
• 2001

Considerable interest has evolved in the flow of non-Newtonian fluids in channels of noncircular cross section in compact heat exchanges. Analytical solution was developed for prediction of the flow rate and maximum velocity in steady laminar flow of any incompressible, time-independent non-Newtonian fluids in straight closed and open channels of arbitrary, but axially unchanging cross section. The geometric parameters and function of shear describing the behavior of the fluid model were evaluated for fluid flow among a bundle of rods arranged in triangular and square array. Numerical values of dimensionless maximum velocities, mean velocities, pressure-drop-flow parameters and friction factors were evaluated as a function of porosity and pitch-to-radius ratio.

• 복식
• /
• 제54권1호
• /
• pp.11-21
• /
• 2004

This study examined the kinds, shape, technique, and arrangement of pattern for the Korean traditional women costume between 1995 and 2002. The sources used this study were collected from the magazine “HANBOK, ONGOJISHIN, BEAUTIFUL OUR DRESS” Results were as follows 1) In the kinds of pattern, the most pattern of use was the flower pattern, and the geometric pattern showed the trend of increase. these results mean the use of pattern lately is progressed by the new direction. 2) In the shape of pattern, the style shapes were decreased gradually and the geometric shapes were increased. these results show that the modern beauty is chased. 3) In the technique of pattern. the results viewed that the embroidery technique used in the meantime decreased and the JOGAKBO technique increased. 4) In the arrangement of pattern, the modern arrangement was most superior in the most of year. That is estimated the arrangement of pattern have been chased the modern beauty than the others of pattern.