• Title/Summary/Keyword: geometric mean

Search Result 748, Processing Time 0.033 seconds

DEVELOPMENT OF SAFETY-BASED LEVEL-OF-SERVICE CRITERIA FOR ISOLATED SIGNALIZED INTERSECTIONS (독립신호 교차로에서의 교통안전을 위한 서비스수준 결정방법의 개발)

  • Dr. Tae-Jun Ha
    • Proceedings of the KOR-KST Conference
    • /
    • 1995.02a
    • /
    • pp.3-32
    • /
    • 1995
  • The Highway Capacity Manual specifies procedures for evaluating intersection performance in terms of delay per vehicle. What is lacking in the current methodology is a comparable quantitative procedure for ass~ssing the safety-based level of service provided to motorists. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections based on the relative hazard of alternative intersection designs and signal timing plans. Conflict opportunity models were developed for those crossing, diverging, and stopping maneuvers which are associated with left-turn and rear-end accidents. Safety¬based level-of-service criteria were then developed based on the distribution of conflict opportunities computed from the developed models. A case study evaluation of the level of service analysis methodology revealed that the developed safety-based criteria were not as sensitive to changes in prevailing traffic, roadway, and signal timing conditions as the traditional delay-based measure. However, the methodology did permit a quantitative assessment of the trade-off between delay reduction and safety improvement. The Highway Capacity Manual (HCM) specifies procedures for evaluating intersection performance in terms of a wide variety of prevailing conditions such as traffic composition, intersection geometry, traffic volumes, and signal timing (1). At the present time, however, performance is only measured in terms of delay per vehicle. This is a parameter which is widely accepted as a meaningful and useful indicator of the efficiency with which an intersection is serving traffic needs. What is lacking in the current methodology is a comparable quantitative procedure for assessing the safety-based level of service provided to motorists. For example, it is well¬known that the change from permissive to protected left-turn phasing can reduce left-turn accident frequency. However, the HCM only permits a quantitative assessment of the impact of this alternative phasing arrangement on vehicle delay. It is left to the engineer or planner to subjectively judge the level of safety benefits, and to evaluate the trade-off between the efficiency and safety consequences of the alternative phasing plans. Numerous examples of other geometric design and signal timing improvements could also be given. At present, the principal methods available to the practitioner for evaluating the relative safety at signalized intersections are: a) the application of engineering judgement, b) accident analyses, and c) traffic conflicts analysis. Reliance on engineering judgement has obvious limitations, especially when placed in the context of the elaborate HCM procedures for calculating delay. Accident analyses generally require some type of before-after comparison, either for the case study intersection or for a large set of similar intersections. In e.ither situation, there are problems associated with compensating for regression-to-the-mean phenomena (2), as well as obtaining an adequate sample size. Research has also pointed to potential bias caused by the way in which exposure to accidents is measured (3, 4). Because of the problems associated with traditional accident analyses, some have promoted the use of tqe traffic conflicts technique (5). However, this procedure also has shortcomings in that it.requires extensive field data collection and trained observers to identify the different types of conflicts occurring in the field. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections that would be compatible and consistent with that presently found in the HCM for evaluating efficiency-based level of service as measured by delay per vehicle (6). The intent was not to develop a new set of accident prediction models, but to design a methodology to quantitatively predict the relative hazard of alternative intersection designs and signal timing plans.

  • PDF

A Study on the Concentration of Nanoparticles and Heavy Metals in Indoor/Outdoor Air in a University Administrative Public Office (대학교 행정실 실내 외 공기 중 나노입자와 중금속 농도에 관한 연구)

  • Choi, Su-Hyeon;Im, Ji-Young;Park, Hee-Jin;Chung, Eun-Kyung;Kim, Jong-Oh;Son, Bu-Soon
    • Journal of Environmental Health Sciences
    • /
    • v.38 no.6
    • /
    • pp.493-502
    • /
    • 2012
  • Objectives: The purpose of this study is to investigate the mass concentration of nanoparticles and understand the characteristics of elements of heavy metal concentrations within nanoparticles in the air using Micro-Orifice Uniform Deposit Impactor Model-110 (MOUDI-110), based on indoor and outdoor air. Methods: This Study sampled nanoparticles using MOUDI-110 indoors (office) and outdoors at S University in Asan, Korea in order to reveal the concentration of nanoparticles in the air. Sampling continued for nine months (10 times indoors and 14 times outdoors) from March to November 2010. Mass concentrations of nanoparticle and concentrations of heavy metals (Al, Mn, Zn, Ni, Cu, Cr, Pb) were analyzed. Results: Indoors, geometric mean concentration of nanoparticles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 0.929 ${\mu}g/m^3$ and 1.002 ${\mu}g/m^3$, respectively. On the other hand, the levels were lower outdoors with 0.819 ${\mu}g/m^3$ and 0.597 ${\mu}g/m^3$. Mann-Whitney U tests showed that the difference between the indoors and the outdoors was statistically meaningful in terms of particles of 0.056 ${\mu}m$ or less (p<0.05) in size. These results are possibly influenced by the use of printers and duplicators as the factor that increased the concentration of nanoparticles. In seasonal concentration distribution, the level was higher during the summer compared to in the autumn. Those of 0.056 ${\mu}m$ or less in size presented a statistically meaningful difference during the summer (p<0.05). These results may be influenced by photochemical event as the factor that makes the levels high. Regarding zinc, among the other heavy metals, the fine particles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 1.699 $ng/m^3$ and 1.189 $ng/m^3$ in the outdoors. In the indoors, the levels were lower, with 0.745 $ng/m^3$ and 0.617 $ng/m^3$. Cr and Ni at the size of 0.056 ${\mu}m$ or less, both of which have been known to pose severe health effects, recorded higher concentrations indoors with 0.736 $ng/m^3$ and 0.177 $ng/m^3$, compared to 0.444 $ng/m^3$ and 0.091 $ng/m^3$ outdoors. By season, Zn, Ni, Cu and Pb posted a high level of indoor concentration during the fall. As for Cr, the level of concentration indoors was higher than outdoors both during the summer and the autumn. Conclusion: This study indicates the result of an examination of nano-sized particles and heavy metal concentrations. It will provide useful data for the determination of basic nanoparticle standards in the future.

The immunogenicity and safety of three-component DTaP vaccine in Korean infants (우리나라 영아에서 3가 정제 백일해 항원 DTaP 백신의 면역원성 및 안전성)

  • Kang, Jin Han;Kim, Jong Hyun;Lee, Jung Hyun;Lee, Soo Young;Hong, Young Jin;Kim, Chang Hwi
    • Clinical and Experimental Pediatrics
    • /
    • v.50 no.4
    • /
    • pp.355-362
    • /
    • 2007
  • Purpose : We conducted the study to evaluate the immunogenicity and safety of three component DTaP vaccine ($Infanrix^{(R)}$) in a group of Korean healthy infants on a three-dose primary vaccination. And we compared the immunogenicity of this DTaP vaccine with two component DTaP vaccine which has been widely used in Korea. Methods : We enrolled one hundred fifty one healthy infants aged 8-9 weeks. These infants were vaccinated at age 2, 4 and 6 months of age with three component DTaP vaccine. Solicited adverse events were actively monitored for 72 hours following each vaccination, and all adverse events after each vaccination were observed for three weeks. Anti-diphtheria toxoid Ab., anti-tetanus toxoid Ab., anti-pertussis toxin Ab., anti-filamentous hemagglutinin Ab., and anti-pertactin Ab. were measured using ELISA for assessing immunogenicity of study vaccine in 60 infants. Immunogenicity analysis of two component DTaP vaccine was performed with same methods in 14 infants as control. Results : The seroconversion rates of anti-diphtheria toxoid Ab, anti-tetanus toxoid Ab. anti-filamentous hemagglutinin Ab. were 100% in both group. Seroconversion rate of anti-pertactin Ab in study group was 100%, but the rate in control group was 50%. However, geometric mean concentration of anti-pertussis toxin Ab. was higher in control group. Mild local and systemic reactions were observed within three days after vaccination, and no serious adverse events related study vaccine were happened during study period. Conclusion : Our study results suggest that three component DTaP vaccine ($Infanrix^{(R)}$) is a well-tolerable and high immunogenic vaccine, especially anti-Pertactin Ab. of the study vaccine is very immunogenic. It can be available as routine DTaP vaccination in our infants.

Airborne Concentrations of Welding Fume and Metals of Workers Exposed to Welding Fume (용접사업장 근로자의 흄 및 금속 노출농도에 대한 평가와 혈중 금속 농도)

  • Choi, Ho-Chun;Kim, Kangyoon;An, Sun-Hee;Park, Wha-Me;Kim, So-Jin;Lee, Young-Ja;Chang, Kyou-Chull
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.9 no.1
    • /
    • pp.56-72
    • /
    • 1999
  • Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.

  • PDF

The Immune Response and Protective Efficacy of Hepatitis B Vaccine in Neonates Born from Hepatitis B Carrier Mothers (B형 간염 바이러스 보유 산모로부터 분만된 신생아의 B형 간염 백신의 면역반응 및 방어효과)

  • Kim, Jong-Hyun;Kang, Jin-Han;Hur, Jae-Kyun;Koh, Dae-Kyun;Oh, Chang-Kyu
    • Pediatric Infection and Vaccine
    • /
    • v.5 no.1
    • /
    • pp.96-103
    • /
    • 1998
  • Purpose : We performed this study to evaluate the immune responses and protective efficacies of the HBV vaccine in infants born from hepatitis B virus(HBV) carrier mothers. Methods : Seventy eight infants born from HBV carrier mothers, who were able to follow up for 12months in the Catholic University St. Vincents hospital, were involved in this study from July 1995 to December 1996. Samples were collected at birth, 4, 8 and 12months after injection of HBIG and HBV heat-inactivated plasma derived vaccines. We evaluated the changes and relationships of viral markers detecting by enzyme immunoassay and radioimmunoassay between HBV carrier mothers and their infants. Results : 1) A total of 5.0%(106/2,117) of pregnant women were found to be a HBV carrier. The rates of HBeAg positive and negative were 38.5%(37/96) and 61.5%(59/96), respectively. 2) The seroconversion rates of anti-HBs with infants of HBV carrier mothers at 4, 8 and 12 months were 85.9%(67/78), 75.6%(59/78) and 73.1%(57/78), respectively. Although these were statistically significant differences(P<0.05), they were not related to HBeAg status of the mothers. The geometric mean titers of anti-HBs at 8 and 12 months were significantly higher than at 4 months, statistically(P<0.05). The protective efficacy of the HBV vaccine and HBIG at 12 months in infants from HBeAg positive and negative mothers were 89.8% and 100%, respectively. 3) Five of 78(6.4%) infants became infected by HBV from only HBeAg positive mothers during the follow up period of 12 months. Three of 5 infected infants became HBV carriers. HBsAg positive at birth from HBeAg positive and negative mother were 4 infants, respectively. Three of 4 infants became infected by HBV from only HBeAg positive mothers. Conclusion : We confirmed that the seroconversion rate of HBV heat-inactivated plasma derived vaccine which was one of other vaccines manufacturing in Korea was 85.9%. The protective efficacy of this HBV vaccine and HBIG at 12 months in infants from HBeAg positive and negative mothers were 89.8% and 100%, respectively.

  • PDF

Evaluation of Sanitary Safety for Shellfish in Hansan·Geojeman, Korea (경남 한산·거제만해역에서 생산된 패류의 위생학적 안전성 평가)

  • Ha, Kwang-Soo;Lee, Ka-Jeong;Jeong, Yeon-Jung;Mok, Jong-Soo;Kim, Poong-Ho;Kim, Yeon-Kye;Lee, Hee-Jung;Kim, Dong-Wook;Son, Kwang-Tae
    • Journal of Food Hygiene and Safety
    • /
    • v.33 no.5
    • /
    • pp.404-411
    • /
    • 2018
  • To evaluate bacteriological and toxicological safety hygienic indicator bacterium and paralytic and diarrhetic shellfish toxins in the shellfish produced in Hansan Geojeman 2013-2017 were investigated. Fecal coliforms were < 18~330 MPN/100 g in 404 oyster samples. But all samples tested, did not exceed 230 E. coli MPN/100 g. Geometric mean of E. coli for oyster samples collected during major shellfish production period was 24.3 MPN/100 g, considerde stable results. Bacteriological quality of oysters collected from Hansan Geojeman meets the standard value based on shellfish hygiene of the Food Sanitation Act of Korea and also meets Grade A, according to classification of shellfish harvesting areas of the European Union. For toxicological evaluation of Hansan Geojeman, 532 oyster samples and 268 mussel samples as an indicator, were analyzed. Paralytic shellfish toxins were detected in the range of 0.42~2.29 mg/kg in eight mussel samples, and exceeded criteria in three samples from early to late April 2013. Diarrhetic shellfish toxin was detected in three of 120 samples, but it was revealed to be under regulation value (0.16 mg Okadaic Acid equ./kg). As a result of toxicological evaluation, paralytic and diarrhetic shellfish toxins were not detected in oyster samples, but it was found that mussel as an indicator species, exceeded the threshold value of paralytic shellfish toxin. Accordingly, sanitary surveys were continuously requested for food safety management of shellfish.

Improvement of GPS positioning accuracy by static post-processing method (정적 후처리방식에 의한 GPS의 측위정도 개선)

  • 김민선;신현옥
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.39 no.4
    • /
    • pp.251-261
    • /
    • 2003
  • To measure the GPS position accuracy and its distribution according to the length of the baseline, 30 minutes to 24 hours observations at the fixed location were conducted with two GPS receivers (Ll, 12 channels) on May 29 to June 2, 2002. The GPS data received at the reference station, the rover station and the ordinary times GPS observation station operated by the National Geography Institute in Korea were processed in kinematic and static post-processing methods with a post -processing software. The results obtained are summarized as follows: 1. The number of the satellite that could be observed continuously more than six hours was 16 and most of these satellites were positioned at east-west direction on May 31, 2002. The number of the satellite observed and the geometric dilution of precision (GDOP) determined by the average of every 10 minute for the day were 8 and 3.89, respectively. 2. Both the average GPS positions before and after post-processing were shifted (standalone: 1.17 m, post -processing: 0.43m) to the south and west. The twice distance root mean square (2drms) measured with standalone was 6.65m. The 2drms could be reduced to 33.8% (standard deviation 0=17.2) and 5.3% (0=2.2) of standalone by the kinematic and the static post-processing methods, respectively. 3. The relationship between the length of the baseline x (km) and the 2drms y (m) obtained by the static post-processing method was y=0.00l6x+0.006 $(R^2=0.87)$. In the case of the positioning with the static post-processing method using the GPS receiver, it was found that a positioning within 20cm 2drms was possible when the length of the baseline was less than 100km and the receiving time of the GPS is more than 30 minutes.

Development of KD- Propeller Series using a New Blade Section (새로운 날개단면을 이용한 KD-프로펠러 씨리즈 개발)

  • J.T. Lee;M.C. Kim;J.W. Ahn;H.C. Kim
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.28 no.2
    • /
    • pp.52-68
    • /
    • 1991
  • A new propeller series is developed using the newly developed blade section(KH18 section) which behaves better cavitation characteristics and higher lift-drag ratio at wide range of angle-of-attack. The pitch and camber distributions are disigned in order to have the same radial and chordwise loading distribution with the selected circumferentially averaged wake input. Since the geometries of the series propeller, such as chord length, thickness, skew and rate distribations, are selected by regression of the recent full scale propeller geometric data, the performance prediction of a propeller at preliminary design stage can be mure realistic. Number of blades of the series propellers is 4 and the expanded blade area ratios are 0.3, 0.45, 0.6 and 0.75. Mean pitch ratios are selected as 0.5, 0.65, 0.8, 0.75 and 1.1 for each expanded area ratio. The new propeller series is composed of 20 propellers and is named as KD(KRISO-DAEWOO) propeller series. Propeller open water tests are performed at the experimental towing tank, and the cavitation observation tests and fluctuating pressure measurements are carried out at the cavitation tunnel of KRISO. $B_{P}-\delta$ curves, which can be used to select the optimum propeller diameter at the preliminary design stage, are derived from a regression analysis of the propeller often water test results. The KD-cavitation chart is derived from the cavitation observation test results by choosing the local maximum lift coefficient and the local cavitation number as parameters. The caviy extent of a propeller can be predicted more accurately by using the KD-cavitation chart at a preliminary design stage, since it is derived from the results of the cavitation observation tests in the selected ship's wake, whereas the existing cavitation charts, such as the Burrill's cavitation chart, are derived from the test results in uniform flow.

  • PDF

Distribution of Epiphytic Bacteria and Acid-Tolerant Bacteria on the Phyllosphere in the Industrial and Clean Areas (공단지역 및 청정지역 식물 잎권의 잎표면세균 및 내산성세균의 분포)

  • Ahn, Jong-Hoon;Bang, Sook-Jin;Han, Nam-Jung;Song, Wang-Young;Hwang, Soyoung;Lee, In-Soo;Park, Seong Joo
    • Korean Journal of Microbiology
    • /
    • v.33 no.4
    • /
    • pp.262-266
    • /
    • 1997
  • Total, direct viable count, and acid-tolerant epiphytic bacterial population sizes were quantified on leaves of chestnut tree (Castanea crenata S. et Z.) near Taejon Industrial Estate affected by acid precipitation and deposition as well as in the clean natural forest area, Mt. Kyejok, in Taejon city from August 1996 to August 1997. Geometric mean numbers of total, direct viable count, and acid-tolerant epiphytic bacteria were $9.9{\times}10^5cell/cm^2$, $1.6{\times}10^6cell/cm^2$, and $7.1{\times}10^3cfu/cm^2$ respectively, being 1.5, 2, and 2.6 times those in the clean area. Acid-tolerant epiphytic bacterial numbers at pH 5.6 by MPN method were $3.3{\times}10^4$ in the industrial area, about the same as the number, $3.4{\times}10^4MPN/cm^2$, of the clean area. Acid-tolerant bacterial number at pH 4.0 was $1.9{\times}10^{-1}MPN/cm^2$ in the industrial area, whereas none was detected in the clean area. Acid-tolerant bacteria at pH 3.0 were not detected at all in the industrial area as well as in the clean area. Epiphytic bacterial population sizes were generally the greatest in May when leaves are emerged and grew hut the lowest in November when defoliation occurs. These results showed that air pollutant deposition on leaves did not cause a decrease of epiphytic bacteria at least and acid deposition on leaves did cause an increase of acid-tolerant bacteria.

  • PDF

Immunogenicity and Safety of Inactivated Influenza Vaccine in Healthy Korean Children and Adolescent (한국의 건강한 소아청소년을 대상으로 한 인플루엔자 사백신의 면역원성과 안전성 연구)

  • Ri, Soohyun;Kim, Mi Jeong;Kim, Yun-Kyung
    • Pediatric Infection and Vaccine
    • /
    • v.25 no.1
    • /
    • pp.35-44
    • /
    • 2018
  • Purpose: This study aimed to evaluate the immunogenicity and safety of a trivalent inactivated influenza vaccine (TIV) among healthy Korean children and adolescents. Methods: From October to December 2008, 65 healthy patients aged 6 months to 18 years who visited Korea University Ansan Hospital for influenza vaccination were enrolled in this study. We measured the hemagglutinin inhibition antibody titers at baseline and 30 days after vaccinating enrollees with split influenza vaccine and calculated the seroprotection rates, geometric mean titers, and seroconversion rates. Local and systemic adverse events were assessed after vaccination. Results: The seroprotection rates against all three viral strains (A/H1N1, A/H3N2, B) were 87.7%, 89.2%, and 89.2% (${\geq}70%$), respectively; seroconversion rates were 44.6%, 73.8%, and 63.1% (${\geq}40%$), respectively; and seroconversion factors were 4.5, 8.4, and 10.5 (>2.5), respectively. The TIV immunogenicity was acceptable according to the CPMP (Committee for Proprietary Medicinal Products) criteria. Although 48 patients (73.8%) reported one or more adverse events, no severe adverse events such as anaphylaxis and convulsion were observed. Forty-two patients (64.6%) reported a local skin reaction, including redness (29.2%), pain (43.1%), or swelling (41.5%) of the injected site, and 26 (40.0%) reported a systemic reaction: fatigue (23.1%), myalgia (20.0%), headache (10.8%), arthralgia (10.8%), chills (9.2%), or fever (7.7%). Conclusions: This study shows that the immunogenicity of the TIV vaccine is acceptable. As there were no serious adverse events aside from local reactions and mild systemic reactions, this vaccine can be safely used among healthy Korean children and adolescents.