• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.1
• /
• pp.41-51
• /
• 2024

If an underground accident occurs, the cause must be quickly identified and human and material damage reduced. The Underground Accident Investigation Committee is responsible for identifying the causes of accidents and preparing response plans to prevent similar accidents from occurring in the future. The law stipulates that the Underground Accident Investigation Committee can operate from a minimum of 6 months to a maximum of 9 months after an accident occurs. However, the operation schedule of the Underground Accident Investigation Committee seems difficult to cite the accident investigation report to the construction project currently in progress at the same time project. In this study, the Underground Accident Investigation Committee seeks to establish a strategy for developing technology that can shorten data collection and analysis, which previously took 3 months, to less than 1 month. As a result of the research, five areas of technology development identified, ground data collection and transmission technology, ground safety data generation technology, digital twin-based underground safety analysis and visualization technology, digital twin-based geo-ambulance construction and operation technology, and digital twin-based geo-ambulance standardization and legal system. research was able to be conducted. If the proposed technology is developed, it is expected to contribute to reducing accident scenes through faster decision making than before.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.3
• /
• pp.263-278
• /
• 2022

This paper contains experimental study for the development and performance of TBM backfill material with thixotropic properties. The LW backfill material is widely applied to fill the cavity on the back side of the shield TBM excavation, but has disadvantages such as settlement caused by strength reduction, material separation by groundwater, and reduced plasticity. In this paper, laboratory tests and a model test were conducted to assess the performance of inorganic thixotropic backfill material proposed to improve these problems. The results of laboratory tests show that 1 hr-uniaxial compressive strength of ITB was 12 times higher than LW, and the rate of bleeding of 20 hr was 8.3 times lower, and the result of flow table test was more than 27 times higher. This result indicated that the inorganic thixotropic backfill material has superior properties to LW backfill in terms of strength reduction, material separation, and thixotropy. In the model experiment, a model injection device tester was manufactured and the injection performance and filling rate were verified. When material was injected in the water, it was visually checked whether material separation occurred, and it was confirmed that the filling rate was 96% or more. Comparison results with the test of LW and ITB materials was concluded that ITB can reduce the material separation by groundwater and the occurrence of tunnel cavity.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.5-12
• /
• 2012

Recently the installation of reinforced earth retaining walls in the domestic construction site has increased, surpassing conventional RC walls. These reinforced walls have various types depending on the reinforcing material, installation method and the form of face panel. However, there are difficulties in design and construction management due to the unproved safety of construction method. In case of reinforcing materials, despite the fact that they come in all different sizes and types produced by small businesses or partially imported with cheap price and low quality, no proper standards for designing the walls have been suggested. In order to apply reinforced retaining wall system to broad cases and design the walls effectively considering site conditions, specific design and construction guidelines for efficient construction management are needed. In conclusion, this study verified that reduction factors can be greatly affected by grain sizes and stiffness of backfill materials and granularity range, therefore in case of relatively large construction site, it is required to redesign the reinforced retaining wall by evaluating site installation resistance test, applying respective reduction factors to each backfill material and select the right geogrid depending on the usage of retaining wall so as to enhance the safety of reinforced earth retaining walls with efficiency.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.31-36
• /
• 2012

Recently, industrial by-products are exponentially growing because energy consumption is increasing due to rapid industrial development and improved living standards. The purpose of this study is to determine the proper mixing ratio to meet the liner conditions(must be less than $1{\times}10^{-7}$cm/sec), using pond ash and bentonite as liner. As the result of the compaction test, depending on the increase mixing ratio of bentonite, the maximum dry unit weight was decreased but the optimum moisture content was tended to be increased at the compaction curve. As the result of the permeability test, depending on the increase mixing ratio of bentonite, the coefficient of permeability showed tendency to be decreased in the form of index and the tendency was caused by the hydration reactions filling the void of the pond ash. When the mixing ratio of bentonite was approximately over 15%, it was satisfied with the land fill liner conditions. In other words, it is necessary to consider other mixtures containing the cement or another material in the economical aspect for application of the pond ash.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2012

This article aims to find method to mix a harmless hardening agent and soil generated during construction to make paving materials. The main purpose of this research is to get rid of the harmfulness(Chromium (VI), etc.) of cement which has been generally and frequently used as a hardening agent and strengthen it so that it can be used for the general foundation solidification and stabilization of civil engineering/construction structures such as dredging soil treatment, marine structure foundation treatment, surface soil stabilization, and river bank erosion prevention. NSS(Natural Stabilizer Soil) used for this study takes as its chief ingredient the mixture of lime and staple fibers extracted from natural fibers. It increases the shearing strength of soil that it improves the support and durability of the foundation and prevents flooding and frost as well. The pH measured to know its eco-friendliness was 6.67~7.15, and according to the migration testing, only Pb and CN were lower than the standards, so it can be said that NSS has almost no harmful components in it. According to the result of uniaxial strength testing, when the mixture ratio of weathered soil to NSS was 6%, about 1,850kpa strength was expressed. And according to the result of CBR. testing to figure out its appropriateness as a paving material, the CBR of the foundation was 4%~6%. But when the mixture ratio of NSS is over 6%, the water immersion CBR. is over 100%; thus, it is expected that it will show great utility as a paving material.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.11
• /
• pp.21-27
• /
• 2015

Due to the population growth and development of industry, waste from household and industries has increased. As the advanced countries experienced these problems, they have already started research on recycling methods of waste incineration ashes. Domestic recycling rate of incineration ash became up to 80 percent as high as the level of developed countries, but the recycling was limited to fly ash for admixture in concrete. In case of bottom ash, most of bottom ash was reclaimed in the landfills. Therefore, basic physical property and mechanical experiments for bottom ash were conducted in this study to evaluate the possibility of incineration bottom ash as an alternative construction materials. Bottom ashes from three different landfills with two different incineration methods were tested. Incineration methods are Stoker type Incinerator and Pyrolysis-Melting Treatment. Bottom ash can be used as an alternative granular material for construction based on the basic physical property and mechanical characteristics similar to those of sandy materials. However, the incineration method should be considered since it can affect the material and mechanical characteristics of the incineration bottom ash.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.12
• /
• pp.43-52
• /
• 2013

Limestone typically forms large caverns such as reticular caverns or limestone caves, and also forms sinkhole and doline. These caverns cause different settlement when constructing roads, dams, etc. because the foundation cannot sustain the upper structures. So it is necessary to reinforce foundation such as cavern filling method, etc. In this study, ground reinforcement for structure foundation was carried out using CGS method in limestone cavity area and evaluation of reinforcement effect from engineering viewpoint was conducted through the field test. Among others, boring test was carried out to identify the ground structure and engineering characteristics. After CGS reinforcement, boring test was conducted for supplementary verification, and with reinforcement core taken during boring test, rock test was carried out to identify the physical properties of reinforcement material. After applying CGS method, rock test of the typical specimen, among reinforcement cores, taken from boring test was carried out and physical properties of the reinforcement was identified. As a result of compressive test of core sample, material inside the cavity was filled properly, indicating compressive strength of 12.2~19.2(MPa) which was evaluated acceptable. Thus the limestone cavity proved to have been reinforced successfully.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.3
• /
• pp.15-24
• /
• 2018

As electromagnetic waves are affected by electrical conductivity or permittivity, they are widely used to evaluate geotechnical characteristics. In this study, a probe for measuring electromagnetic waves using a time domain reflectometry is manufactured to evaluate heavy metal concentration in saline water. In the experiments, a copper is used as a heavy metal, and a probe is demonstrated with the concentration of copper. Solutions were set for 8 different copper concentration (0, 0.01, 0.05, 0.1, 0.5, 1, 5, 10 mg/L) in saline water with 3% salinity. The probe is coated by electrical insulating materials such as epoxy, top-coat, varnish, acrylic paint, heat-shrinkage tube to measure electromagnetic waves in saline water. The measured signals are compared according to coating material. As results, for probes coated with acrylic paint and heat-shrinkage tube, signal variation is not detected. For epoxy, top-coat, and varnish coated probes, the voltage decreases with an increase of copper concentration. Probes coated by epoxy at once and top coat can estimate under 5 mg/L of copper concentration and the probe coated by epoxy twice can estimate over 5 mg/L of copper concentration. This study shows that the probe using the time domain reflectometry can be used to evaluate the concentration of heavy metal in saline water by coating the probe with insulating material.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.9
• /
• pp.53-59
• /
• 2012

This study investigated characteristics of decomposition of tetrabutoxysilane (TBOS) as a slow release substrate (SRS) and on effect of TBOS decompostion compounds (acetate and butylate) for anaerobic dechlorination of trichloroethylene (TCE). In the batch experiment, TCE, cis-dichloroethene (cis-DCE), 1-butanol and TBOS were analysed by GC/FID and acetate and butylate were measured by HPLC. 1M of TBOS transferred and accumulated 4M of 1-butanol by abiotically hydrolysis reaction. The hydrolysis rate was in a range of 0.186 ${\mu}M/day$. On other hand, 1-butanol fermented to butyrate and acetate with indigenous culture from natural sediments. This results showed that TBOS could be used a slow release substrate in the natural sites. The dechlorinated potential of TCE with acetate and butyrate was increased with a decreasing initial TCE concentrations. In addition, first order coefficients of dechlorination with acetate as electron donor was higher then that with butyrate. It is because that dechlorination of Geobacter lovleyi was affected by substrate affinity, biodegradability and microbial acclimation on various substrates. However, dechlorinated potential of Geobacter lovleyi was decreased with accumulation cis-DCE in the anaerobic decholoronation process. The overall results indicated that SRS with Geobacter lovleyi might be a promising material for enhancing dechlorination of TCE on natural site and cis-DCE should be treated by ZVI as reductive material or by coexisting other dechlorinated bacteria.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.9
• /
• pp.25-32
• /
• 2020

The underground utilities installed under the ground is an important civil engineering structure, such as water supply and sewerage pipes, underground power lines, various communication lines, and city gas pipes. Such underground utilities can be exposed to risk due to external factors such as concentrated rainfall and vehicle load, and it is important to select and construct an appropriate backfill material. Currently, a method mainly used is to fill the soil around the underground utilities and compact it. But it is difficult to compact the lower part of the buried pipe and the compaction efficiency decreases, reducing the stability of the underground utilities and causing various damages. In addition, there are disadvantages such as a decrease in ground strength due to disturbance of the ground, a complicated construction process, and construction costs increase because the construction period becomes longer, and civil complaints due to traffic restrictions. One way to solve this problem is to use a liquid filler. The liquid filler has advantages such as self-leveling ability, self-compaction, fluidity, artificial strength control, and low strength that can be re-excavated for maintenance. In this study, uniaxial compression strength test and fluidity test were performed to characterize the mixed soil using marine clay, stabilizer, and in-situ soil as backfill material. A freezing-thawing test was performed to understand the strength characteristics of the liquid filler by freezing, and in order to examine the effect of the filling materials on the corrosion of the underground pipe, an electrical resistivity test and a pH test were performed.