• Journal of Communications and Networks
• /
• 제17권3호
• /
• pp.275-285
• /
• 2015

To improve the efficiency of carrier sense multiple access (CSMA)-based medium access control (MAC) protocols, CSMA with collision resolution (CSMA/CR) has been proposed. In the CSMA/CR, a transmitting station can detect a collision by employing additional sensing after the start of a data transmission and then resolve the next collision that might occur by broadcasting a jam signal during a collision detection (CD) period. In this paper, we analyze the delay of a CSMA/CR based on a generic p- persistent CSMA model and obtain the minimum achievable delay of the CSMA/CR by finding the optimal length of the CD period according to the number of contending stations. Through this delay analysis, we also investigate the throughput-delay characteristics of the CSMA/CR protocol according to various parameters. Analysis and simulation results show that the CSMA/CR has a considerably lower delay and its throughput-delay characteristic is significantly improved than the conventional CSMA/CA and wireless CSMA/CD protocols.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2821-2823
• /
• 2002

In this paper we propose the Multi-FNN (Fuzzy-Neural Networks) for optimal identification modeling of complex system. The proposed Multi-FNNs is based on a concept of FNNs and exploit linear inference being treated as generic inference mechanisms. In the networks learning, backpropagation(BP) algorithm of neural networks is used to updata the parameters of the network in order to control of nonlinear process with complexity and uncertainty of data, proposed model use a HCM(Hard C-Means)clustering algorithm which carry out the input-output dat a preprocessing function and Genetic Algorithm which carry out optimization of model The HCM clustering method is utilized to determine the structure of Multi-FNNs. The parameters of Multi-FNN model such as apexes of membership function, learning rates, and momentum coefficients are adjusted using genetic algorithms. An aggregate performance index with a weighting factor is proposed in order to achieve a sound balance between approximation and generalization abilities of the model. NOx emission process data of gas turbine power plant is simulated in order to confirm the efficiency and feasibility of the proposed approach in this paper.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.104-114
• /
• 1999

This study was conducted to find out the proper ways of implementation of Hazard Analysis Critical Control Point (HACCP) concepts applicable to the current Korean food inspection system. The following recommendations are based on an in-depth review of the Canadian Food Safety Enhancement Program (FSEP), which is one of the leading HACCP programs adapted to the food industry. Since 1997, the HACCP system has been voluntarily applied to meat processing plants in Korea in accordance with the Food Protection Law. But the guidelines are obscure and inadequate to expand to the diversity of food plants, and are therefore only applied to a limited number of plants of small scale enterprise. For these reasons, it is necessary to prepare an enhanced food safety control program focused not only on the HACCP plants but also on the non-HACCP plants. The national program should be the fundamental framework of a food safety control policy enforced by all the relevant authorities. The Prerequiste Program of Canadian Food Inspection Agency and Sanitation Standard Operating Procedures (SSOP) of FSIS are good example programs for the non-HACCP plants. These programs, which are a major part of the HACCP system, could easily be adapted to the Korean food industry. To improve the current HACCP implementation guideline, it is necessary to develop a detailed implementation manual, generic HACCP model, training program, and an audit program.

• 센서학회지
• /
• 제29권5호
• /
• pp.283-292
• /
• 2020

Current sensors that use a Hall element and Hall IC to measure the magnetic fields generated in steel silicon core gaps do not distinguish between direct and alternating currents. Thus, they are primarily used to measure direct current (DC) in industrial equipment. Although such sensors can measure the DC when installed in expensive equipment, ascertaining problems becomes difficult if the equipment is set up in an unexposed space. The control box is only opened during scheduled maintenance or when anomalies occur. Therefore, in this paper, a method is proposed for facilitating the safety management and maintenance of equipment when necessary, instead of waiting for anomalies or scheduled maintenance. A Bluetooth 4.0 low-energy current-sensor system based on near-field communication is used, which compensates for the nonlinearity of the current-sensor output signal using a piecewise linear model. The sensor is controlled using its generic attribute profile. Sensor nodes and cell phones used to check the signals obtained from the sensor at 50-A input currents showed an accuracy of ±1%, exhibiting linearity in all communications within the range of 0 to 50 A, with a stable output voltage for each communication segment.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.99-123
• /
• 1997

Performance analysis of NTT/BT protocol is investigated, which is a GFC (Generic Flow Control) ptotocol in ATM (Asynchronous Transfer Mode ) network and is based on cyclic reset mechanism. THe mean cell delay time is proposed as a performance measure of NTT/BT protocol. The mean cell delay time is defined as the duration from the instant the cell arrives at the transmission buffer until the cell is fully transmitted. The process of cell transmission can be described as a single server queueing modle with two dependent services. By utilizing this model, mean cell delay time is obtained and sensitivity of the factors such as window size and reset period is also analysed.

• 시스템엔지니어링학술지
• /
• 제7권1호
• /
• pp.9-21
• /
• 2011

Assuming that the Capability Maturity Model Integration for Development v1.2 (CMMI) could be applied to an organization more effectively if the content similarities among practices were improved in terms of structure and composition, this paper presents the analysis of the correlations between the CMMI Specific Practices (SP) and Generic Practices (GP) for the Maturity Level 2 and 3 Process Areas using the Chi-square independence test. According to the analysis, a 22.2% correlation was observed. To minimize the problem of repeatedly applying similarities, 6 GPs that are highly correlated with the SPs were grouped together. Then, three different improvement plans: 1) development of a standard template-based project plan, 2) establishment of a configuration management system based on open source software to control work products and leverage experience, and 3) establishment of project assurance through an independent quality assurance-based organization and intensive review by higher-level management - were defined.

• 한국CDE학회논문집
• /
• 제11권3호
• /
• pp.197-204
• /
• 2006

This paper introduces a development of an internet based robot on the view of product development for hardware and software convergences. The robot can report moving images of remote places and navigate there autonomously. In addition it can be controlled by remote users through wireless internet. Even the control program for the robot can be updated by the remote users during the regular operation mode. This paper provides a consistent product data model and generic product development processes that can support the development of the robot, a convergence of various hardware and software parts. It also includes discussions and experiences about the development of the convergence product.

• ETRI Journal
• /
• 제27권6호
• /
• pp.651-665
• /
• 2005

This paper proposes a generic security architecture designed for a multidomain and multiservice network based on programmable networks. The multiservice network allows users of an IP network to run programmable services using programmable nodes located in the architecture of the network. The programmable nodes execute codes to process active packets, which can carry user data and control information. The multiservice network model defined here considers the more pragmatic trends in programmable networks. In this scenario, new security risks that do not appear in traditional IP networks become visible. These new risks are as a result of the execution of code in the programmable nodes and the processing of the active packets. The proposed security architecture is based on symmetric cryptography in the critical process, combined with an efficient manner of distributing the symmetric keys. Another important contribution has been to scale the security architecture to a multidomain scenario in a single and efficient way.

• International Journal of Control, Automation, and Systems
• /
• 제1권2호
• /
• pp.194-202
• /
• 2003

In this paper, we introduce a category of Multi-FNN (Fuzzy-Neural Networks) models, analyze the underlying architectures and propose a comprehensive identification framework. The proposed Multi-FNNs dwell on a concept of fuzzy rule-based FNNs based on HCM clustering and evolutionary fuzzy granulation, and exploit linear inference being treated as a generic inference mechanism. By this nature, this FNN model is geared toward capturing relationships between information granules known as fuzzy sets. The form of the information granules themselves (in particular their distribution and a type of membership function) becomes an important design feature of the FNN model contributing to its structural as well as parametric optimization. The identification environment uses clustering techniques (Hard C - Means, HCM) and exploits genetic optimization as a vehicle of global optimization. The global optimization is augmented by more refined gradient-based learning mechanisms such as standard back-propagation. The HCM algorithm, whose role is to carry out preprocessing of the process data for system modeling, is utilized to determine the structure of Multi-FNNs. The detailed parameters of the Multi-FNN (such as apexes of membership functions, learning rates and momentum coefficients) are adjusted using genetic algorithms. An aggregate performance index with a weighting factor is proposed in order to achieve a sound balance between approximation and generalization (predictive) abilities of the model. To evaluate the performance of the proposed model, two numeric data sets are experimented with. One is the numerical data coming from a description of a certain nonlinear function and the other is NOx emission process data from a gas turbine power plant.

• 한국정보통신학회논문지
• /
• 제8권2호
• /
• pp.499-508
• /
• 2004

스마트 홈이나 지능화된 홈 네트워크 제어 시스템이 거주자에 대한 자동화된 서비스를 제공하기 위해서 홈 디바이스들의 협업을 필요로 한다. 홈 디바이스들의 협업은 사용자의 제어 요구에 대해 같은 목적을 가지는 둘 이상의 홈 디바이스들을 동시에 제어하는 거주자를 위한 서비스로 정의할 수 있다. 홈 디바이스 협업의 대상이 되는 것은 흠 디바이스의 동작 객체이며, 이 객체들은 AHAM(Association of Home Appliance Manufactures) CHA(Connected Home Appliances)에 디바이스(가전기기) 모델 별로 정의되어 있다. AHAM의 CHA는 일반적인 가전기기 모델, 객체들과 상위 수준의 메시지들을 표현함으로써 네트워킹을 통해 가능한 서비스와 특징들을 활성화하고자 하고 있으나, 디바이스 모델의 객체간의 협업의 표현파 처리에 대해서는 고려되어 있지 않다. 본 논문은 홈 디바이스들 사이에서 발견할 수 있는 협업 관계를 정의하고, AHAM의 객체들이 협업 관계를 처리할 수 있는 협업 모델을 제안한다