• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.891-895
• /
• 1988

We discuss what kind of scale is suitable for analog signal recording paper from the viewpoint of human engineering. We show a method for automatically generating a suitable scale from the higher and lower limits of the recording range.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.240-247
• /
• 2009

The results of performance analysis by adopting the channel scenarios characterized as Weibull fading for an multicarrierdirect sequence-coded division multiple access (MC-DS-CDMA) system are proposed in this investigation. On the other hand, an approximate simple expression with the criterion of bit error rate (BER) versus signal-to-noise ratio (SNR) method is derived for an MC-DS-CDMA system combining with maximal ratio combining (MRC) diversity based on the moment generating function (MGF) formula of Weibull statistics, and it associates with an alternative expression of Gaussian Q-function. Besides, the other point of view on the BER performance evaluation of an MC-DS-CDMA system is not only the assumption of both single-user and multi-user cases applied, but the phenomena of partial band interference (PBI) is also included. Moreover, in order to validate the accuracy in the derived formulas, some of the system parameters, such as Weibull fading parameter (${\beta}$), user number (K), spreading chip number (N), branch number (L), and the PBI (JSR) values, etc., are compared with each other in the numerical results. To the best of author's knowledge, it is a brand new idea which proposes the evaluation of the system performance for an MC-DS-CDMA system over the point of view with Weibull fading channel.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.6
• /
• pp.47-56
• /
• 2004

Automatic code generating function for security protocol of SPEAR II and IFAD VDM-SL Toolbox supporting formal specification is presented in this paper. Among the functions of these tools we compare and analyze the aspects of functions, users, operation and code generation. And we suggest direction to the developing of safe security S/W. The automatic code generating function for security protocol gives the direction for developing of the safe secure software in formal specification method.

• The KIPS Transactions:PartB
• /
• v.11B no.4
• /
• pp.477-484
• /
• 2004

The technique of sequential pattern mining means generating a set of inter-transaction patterns residing in time-dependent data. This paper proposes a new method for generating sequential patterns with the use of Hellinger measure. While the current methods are generating single dimensional sequential patterns within a single attribute, the proposed method is able to detect multi-dimensional patterns among different attributes. A number of heuristics, based on the characteristics of Hellinger measure, are proposed to reduce the computational complexity of the sequential pattern systems. Some experimental results are presented.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.97-102
• /
• 2007

Satellite performance can be evaluated by satellite product. When satellite development technology is in developing, most of efforts focus on success of satellite operation and safety. But, more and more efforts are focused on satellite performance and mission success. Especially quality of the image which is delivered to user is very important factor. In this paper, generating method for simulated image in the point of MTF is described.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.570-571
• /
• 2008

This paper presents a method for the determination of total transfer capability in interconnected power systems, which is based on sequential quadratic programming (SQP). The objective function is the maximization of the interconnected line flow. To calculate TTC the control variables are the active power of the generating units, the voltage magnitude of the generator, transformer tap settings and SVC setting. The state variables are the bus voltage magnitude, the reactive power of the generating unit, line flows and the tie line flow. The method proposed is applied to the modified IEEE 14 buses model system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.957-963
• /
• 2015

The autocorrelation of an alternative binary offset carrier (AltBOC) signal provides an improved positioning accuracy because of its narrow main-peak. However, The AltBOC signal has a disadvantage that the autocorrelation of the AltBOC signal has multiple side-peaks which incur a severe positioning error. In this paper, we propose a generating method of an unambiguous correlation function for AltBOC signal tracking. Specifically, we first obtain symmetric partial correlation functions, and subsequently, we obtain an unambiguous correlation function by combining them. In numerical results, it is confirmed that the proposed correlation function provides better tracking error standard devation (TESD) performances comparing with the conventional correlation functions.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2504-2511
• /
• 1999

This paper proposes the scattered data interpolation as an efficient method that is designed for free-form surface. Data interpolation is an essential method of designing for various objects. For the generating free-form surface of complexity construction, the existing method had problems to represent flat area and sharp corner edge, in presenting objects with computing the weight of control points. For solving this problem, we proposes the generating method of new approximation surfaces, using scattered data interpolation. This method obtains B-Spline basis function which calculates main curvature, having optimized value in variable area, on given control points and changed objects, and then computes the changing rate the approximating data, using it's value. We also present this method that generates smoother free-form surface, using the scattered data interpolation with minimum weight.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.371-372
• /
• 2016

In this paper, the encoder of the hybrid type which can use a single position sensor in order to overcome the use of multiple signal lines and the reliability reduction for the location information acquisition caused by using a plurality of position detectors to acquire the position information of the rotor offer. Encoder of the proposed method was the replacement location information generating function by the plurality of sensors to the Capture function of the shape and the microcomputer of the encoder plate. Capture of the DSP function was verified through experiments using the in order to verify the validity of the detection by the proposed method and the hybrid encoder position prototyping, a means.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.189-196
• /
• 1990

In the present study, a new method of generating boundary-fitted coordinates systems controlled by control function is introduced. Application of the method to a three-dimensional simply-connected region is the demonstrated. The numerical grid generation has following feat ures, (a) The generated boundary fitted coordinates is well concentrated in near wall region and satisfied orthogonality, (b) The grid control function is fully automatic and well controlled in sharp convex boundary.