• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.61-72
• /
• 2011

In the benefits of ITS, there are intangible gains from real-time traffic information as well as classical gains such as travel time saving. These intangible gains are difficult to be estimated by existing transportation investment appraisal commonly used in SOC investment. The major reason is not because of the absence of methodology but because of the absence of generalized values of particular benefits from real time traffic information. This research explores the value of real-time traffic information on VMS that is the most representative of ITS services, by using CVM with Double Bounded Dichotomous Choice Question. Willingness-To-Pay (WTP) functions of drivers are built with survival functions using various types of probability distribution functions such as Exponential, Log-logistic, and Weibull functions. The results reveal that Log-logistic distribution is the most appropriate distribution model to estimate WTP, and the estimated coefficients are stable through LR (Likelihood Ratio) test. For the further study, it is recommended to perform statistical tests of temporal and spatial transferability that is not examined in this research due to the lack of data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.791-803
• /
• 2016

Recently, frequency of extreme rainfall events in South Korea has been substantially increased due to the enhanced climate variability. Korea is prone to flooding due to being surrounded by mountains, along with high rainfall intensity during a short period. In the past three decades, an increase in the frequency of heavy rainfall events has been observed due to enhanced climate variability and climate change. This study aimed to analyze extreme rainfalls informed by their frequency of occurrences using a long-term rainfall data. In this respect, we developed a Poisson-Generalized Pareto Distribution (Poisson-GPD) based rainfall frequency method which allows us to simultaneously explore changes in the amount and exceedance probability of the extreme rainfall events defined by different thresholds. Additionally, this study utilized a Bayesian approach to better estimate both parameters and their uncertainties. We also investigated the synoptic patterns associated with the extreme events considered in this study. The results showed that the Poisson-GPD based design rainfalls were rather larger than those of based on the Gumbel distribution. It seems that the Poisson-GPD model offers a more reasonable explanation in the context of flood safety issue, by explicitly considering the changes in the frequency. Also, this study confirmed that low and high pressure system in the East China Sea and the central North Pacific, respectively, plays crucial roles in the development of the extreme rainfall in South Korea.

• Journal of Korea Water Resources Association
• /
• v.51 no.3
• /
• pp.195-205
• /
• 2018

Drought is a complex phenomenon caused by various factors which can be classified into natural and anthropogenic causes. In Korea, the natural drought typically occurs when the high pressure of the Pacific Ocean develops rapidly or becomes stronger than usual in summer, resulting in a short-lived monsoon season. Drought also can be classified into meteorological, agricultural, hydrological, and socioeconomic drought depending on the development process and consequences. Each type of droughts can influence the other drought types directly or indirectly. Drought propagation refers a phenomenon that changes from meteorological drought to agricultural or hydrological drought. In this study, the occurrence and patterns of drought propagation are evaluated. The relationship between meteorological and agricultural droughts was assessed using hydrometeorological data. We classified the types of drought into five categories to evaluate the occurrence and characteristics of drought propagation. As results, we found drought propagation did not occur or delayed until three months, depending on the type of drought. The further generalized relationship of drought propagation is expected to be used for predicting agricultural drought from the preceding meteorological drought.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.169-180
• /
• 2019

Shorelines should be extracted with consistency because they are the reference for determining the shape of a country. Even in the same area, inconsistent minimum vertex intervals cause inconsistencies in the coastline length, making it difficult to acquire reliable primary data for national policy decisions. As the shoreline length cannot be calculated consistently for shorelines produced by determining the arbitrary distance between points below 1m, a methodology to calculate consistent shoreline length using the minimum vertex interval is proposed herein. To compare our results with the shoreline length published by KHOA(Korea Hydrographic and Oceanographic Agency) and analyze the change in shoreline length according to the minimum vertex interval, target sites was selected and the grid overlap of the shoreline was determined. Based on the comparison results, minimum grid sizes and the minimum vertex interval can be determined by deriving a polynomial function that estimates minimum grid sizes for determining consistent shoreline lengths. By comparing public shoreline lengths with generalized shoreline lengths using various grid sizes and by analyzing the characteristics of the shoreline according to vertex intervals, the minimum vertex intervals required to achieve consistent shoreline lengths could be estimated. We suggest that the minimum vertex interval methodology by quantitative evaluation of the determined grid size may be useful in calculating consistent shoreline lengths. The proposed method by minimum vertex interval determination can help derive consistent shoreline lengths and increase the reliability of national shorelines.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.313-321
• /
• 2014

In current society, the digital era that makes enormous amount of data, and the diversified city, the smart space, which has characteristics of creating, collecting and representing data, is appeared. After 2012, in the social media environment called hyper-connected society with wide-spread smart phone, people started to get interested in public data and big data by generalized mobile device and SNS. At first, development of forming platform of data was focused, but now, many different idea from diverse area have been suggested about data analysis and usage to visualize the space intellectualization service. To focus on the visualization process to increase the usage of this public data for ordinary people more than specialized people, this research grasps the present condition of open data and public data service from the current public data portal and considers the applicability of them. As the result of research, the analysis and application of data to ordinary people decrease the use of paper documents, and this research will help to develop the application which is fast and accurate about individual behavior and demand to utilize public data service in intellectual space.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.3
• /
• pp.264-274
• /
• 2016

It is a trend that carbonated drink intake among adolescents is increasing, which makes young people more vulnerable to dental erosion. However, in Korea, public knowledge about dental erosion is very insufficient. The aim of this study was to investigate the prevalence of dental erosion and to assess its risk indicators among 13-15 years old students in Yangsan, Korea. A total of 1,371 adolescents were examined by one calibrated clinician. Dental erosion was assessed by using the Visual Erosion Dental Examination system. Correlation between their dietary habit, oral hygiene and dental erosion was assessed. The data showed that 676 (49.3%) adolescents had dental erosion. The prevalence of dental erosion was significantly higher in females than in males. The prevalence of tooth erosion in mandible is higher than in maxilla. Dental erosion was generalized to develop mostly on anterior teeth, especially lateral incisor, however, the severity score was highest in canines. Following questionnaire analysis, dental erosion was significantly associated with milk and flavored milk. No other associations were detected. The prevalence of dental erosion in this study is higher than those of previous reports. On the contrary to previously reported studies, the prevalence of dental erosion in females is higher than in males.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.766-770
• /
• 2008

Gingival fibromatosis is a rare condition characterized by varying degrees of gingival hyperplasia. Gingival fibromatosis usually occurs as an isolated disorder or can be associated with a variety of other syndromes. It usually appears at the time of eruption of permanent dentition but, can develop at the time of eruption of the primary dentition and rarely at birth. It may deform palatal contour and subsequently restrict the tongue movement, resulting in interference during speech and mastication. In addition, it incapacitates maintenance of normal lip closure. A 14-month-old girl visited the department of pediatric dentistry, Yonsei University Dental Hospital, for the congenital gingival overgrowth. There was no one in the family, who showed similar pattern of gingival growth. The intraoral clinical examination revealed generalized severe gingival enlargement throughout the maxillary and the mandibular arches. Enlarged gingival tissue was pink and had firm consistency. She was referred for chromosomal analysis, which confirmed absence of any known syndrome. Under local anesthesia, "Punch-biopsy" was performed on the labial area, and the specimen was histologically diagnosed as gingival fibromatosis. For she did not have any medical problem nor familiar history, she was diagnosed as having idiopathic gingival fibromatosis. Regarding her age and behavior, close follow-up was decided.

• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.167-176
• /
• 2016

Shear friction strength model of concrete was proposed to explain the direct friction mechanism at the concrete interfaces intersecting two structural elements. The model was derived from a mechanism analysis based on the upper-bound theorem of concrete plasticity considering the effect of transverse reinforcement and applied axial loads on the shear strength at concrete interfaces. Concrete was modelled as a rigid-perfectly plastic material obeying modified Coulomb failure criteria. To allow the influence of concrete type and maximum aggregate size on the effectiveness strength of concrete, the stress-strain models proposed by Yang et al. and Hordijk were employed in compression and tension, respectively. From the conversion of these stress-strain models into rigidly perfect materials, the effectiveness factor for compression, ratio of effective tensile strength to compressive strength and angle of concrete friction were then mathematically generalized. The proposed shear friction strength model was compared with 91 push-off specimens compiled from the available literature. Unlike the existing equations or code equations, the proposed model possessed an application of diversity against various parameters. As a result, the mean and standard deviation of the ratios between experiments and predictions using the present model are 0.95 and 0.15, respectively, indicating a better accuracy and less variation than the other equations, regardless of concrete type, the amount of transverse reinforcement, and the magnitude of applied axial stresses.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2002

As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.582-593
• /
• 1999

This paper presents the design and fabrication of the diplexer for a KOREASAT-III Ka-band satellite transponder. The transmission characteristics of the diplexer is analyzed by calculating the generalized scattering matrix using mode matching method. It is composed of 2 bandpass filters, coupled with H-plane T-junction having symmetrical inductive iris and E-plane metal insert structures. Compared with the size and weight of the Rx and Tx filter loaded with a transponders respectively, those of the diplexer can be effectively reduced. In a high power transmission, the variation of the filter characteristics is minimized by the scheme that irises are extended to the exterior of H-plane of the waveguide. This scheme needs no extra heat sinks for dissipating high power. The diplexer is designed to improve the simplification, durability and reliability by eliminating tuning screws, which have been used to compensate for the characteristics of fabricated filters. The bandpass filters of the diplexer show the insertion loss of less than 1.2 dB and the return loss in excess of 15 dB. The isolations of more than 65 dB have been achieved between Rx and Tx filter.