• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.600-605
• /
• 2003

PCA(Principle Component Analysis) has emerged as a useful tool for process monitoring and fault diagnosis. The general approach requires the user to identify the root cause by interpreting the residual or principle components. This could be tedious and often impossible for a large process. In this paper, PCA scheme is combined with the FCM-based fault diagnostic algorithm to enhance the diagnostic results. The implementation of the FCM-based fault diagnostic system by using PCA is done and its application is illustrated on the two-tank system.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.558-564
• /
• 2001

General vehicle is evaluated by its acceleration, fuel economy, NVH (Noise, Vibration and Harshness) and subjective (Launching feel) performance. The first step to enhance its performance is to know how much each component affects on the vehicle performance. It is very important to know what is the key factor of the component among many specifications. Hydraulic torque converter can be expressed by means of its performance curve (torque ratio and capacity factor). In this paper, the key factor of torque converter, which affect vehicle performance, are explored by using Taguchi method.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.219-222
• /
• 2001

The human speech sounds are use to diagnosis in oriental medicine with ‘0-sung’theory. In general, human voice are sound waves which generated by phonation. Two major parts of phonation are vocal cords and vocal tract. The uniqueness of individual vocal sound depend on structure and usage of their vocal cords and tract. In the oriental medicine, “0-sung (5-tones)” has been used to classify constitution of human body In order to characterize the “0-sung”, their frequency characteristics are investigated, and a principal frequency component is extracted. Then, the principal component is applied to classify sounds into “0-sung.”

• Journal of The Korean Astronomical Society
• /
• v.14 no.2
• /
• pp.89-93
• /
• 1981

Weibull analyses given to the initial mass function (IMF) deduced by Miller and Scalo (1979) have shown that the mass dependence of IMF is an exp$[-{\alpha}m]$- form in low mass range while in the high mass range it assumes an exp$[-{\alpha}\sqrt{m}]/\sqrt{m}$-form with the break-up being at about the solar mass. Various astrophysical reasonings are given for identifying the exp$[-{\alpha}m]$ and exp$[-{\alpha}\sqrt{m}]/\sqrt{m}$ with halo and disk star characteristics, respectively. The physical conditions during the halo formation were such that low mass stars were preferentially formed and those in the disk high mass stars favoured. The two component nature of IMF is in general accord with the dichotomies in various stellar properties.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.4
• /
• pp.207-212
• /
• 2003

System analysis programs have been developed by several different research groups. Especially, the programming languages and the developing environments of algorithm modules and user interface modules are different. And therefore, the differences have degraded interoperability and reusability of the system analysis modules. in order to solve this problems, a general binary interface has designed and the component based on the interface has developed as well. However, sometimes each interface is uncompatible because those are designed on the particular vendor. In this paper, we deals with XML web service, Sort of distributed processing architecture, which is not restricted by not only the existing internet standard but also any Programming language or any vendor. Because of its platform independent, each module can be updated and extended independently.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.730-738
• /
• 1994

The major advantage of the short-term load forecasting technique using general exponential smoothing is high accuracy and operational simplicity, but it makes large forecasting error when the load changes repidly. The paper has presented new technique to improve those shortcomings, and according to forecasted the technique proved to be valid for two years. The structure of load model is time function which consists of daily-and temperature-deviation component. The average of standard percentage erro in daily forecasting for two years was 2.02%, and this forecasting technique has improved standard erro by 0.46%. As relative coefficient for daily and seasonal forecasting is 0.95 or more, this technique proved to be valid.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.432-435
• /
• 2020

The elasticity tensor for water may be employed to model the fully saturated porous material. Mostly water is assumed to be incompressible with a bulk modulus, however, the upper and lower bounds of off-diagonal components of the elasticity tensor of porous materials filled with water are violated when the bulk modulus is relatively high. In many cases, the generalized Hill inequality describes the general bounds of Voigt and Reuss for eigenvalues, but the bounds for the component of elasticity tensor are more realistic because the principal axis of eigenvalues of two phases, matrix and water, are not coincident. Thus in this paper, for anisotropic material containing pores filled with water, the bounds for the component of elasticity tensor are expressed by the rule of mixture and the upper and lower bounds of fully saturated porous materials are violated for low porosity and high bulk modulus of water.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.213-214
• /
• 2014

This paper compares two instantaneous reactive power definitions in DFIG wind turbine with a back-to-back three-level neutral-point clamped voltage source converter under unbalanced grid conditions. In general, conventional definition of instantaneous reactive power is obtained by taking an imaginary component of complex power. The other definition of instantaneous reactive power can be developed based on a set of voltages lagging the grid input voltages by 90 degree. A complex quantity referred as a quadrature complex power is defined. Proposed definition of instantaneous reactive power is derived by taking a real component of quadrature complex power. The characteristics of two instantaneous reactive power definitions are compared using the ripple-free stator active power control algorithm in DFIG. Instantaneous reactive power definition based on quadrature complex power has a simpler current reference calculation control block. Ripple of instantaneous active and reactive power has the same magnitude unlike in conventional definition under grid unbalance. Comparison results of two instantaneous reactive power definitions are verified through simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.52-60
• /
• 2000

In order to design a reliable machine component efficiently, it is necessary to set up the process of durability analysis using computer simulation technique. In this paper, two methods for dynamic stress calculation, which are basis of durability analysis, are reviewed. Then, a user-oriented dynamic stress analysis program is developed from these two algorithms together with a general-purpose flexible body dynamic analysis and structural analysis programs. Finally, a slider-crank mechanism which has a flexible connecting-rod is chosen to show the special characteristics of these two dynamic stress calculation methods.

• PNF and Movement
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2003

Objectives: The main purpose of this study is to analyze the importance of the rotatory factor in PNF pattern. In this article has to analyze and clarify the importance of the rotatory factor in PNF pattern by comparing the general concepts, facilitation technics, and neuroscience of muscle spindle, etc. Methods: This is a literature study with books. Results : There is close relationships between the pattern in PNF and rotatory factor. PNF pattern is priorily made up the diagonal and spiral pattern. the rotatory factor influences and guides from the start to end in the pattern. Conclusions : Rotation component is most important of the three component that one flexion or extension, abduction or adduction and rotation. It is that provide longer muscle length and stimulate the muscle spindles.