• 한국항만경제학회지
• /
• 제31권4호
• /
• pp.133-150
• /
• 2015

이 연구에서는 미국 EPA에서 개발된 NONROAD 모형을 이용하여 인천항 항만하역장비에서 배출되는 온실가스 및 유해가스 배출량을 추정한다. 인천항은 838.4톤의 NOx, 82,747톤의 CO2를 배출하였다. 이는 LA항만에서 배출되는 NOx 배출량의 2.4배, CO2 배출량의 1.3배에 해당한다. 일반하역장비의 배출량은 컨테이너하역장비 배출량의 5배로 드러났다. 인천항을 구성하는 세 항만 중 원자재를 처리하는 북항부두가 다른 항들에 비해 배출량이 많은 것으로 연구되었다. Chang et al.(2013, 2014)의 연구와 비교해 봤을 때 항만하역장비 당 CO2와 NOx 배출량은 선박 당 배출량의 10배에 달하는 것으로 드러났다.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.599-610
• /
• 2011

Emission of air pollutants such as nitrogen oxides ($NO_x$), hydrocarbons (HC), $SO_2$, and particulate matter (PM) and $CO_2$ from ship during 2009 in Busan port was estimated based on activity-based method. The significant fraction (> 50%) of ship emission resulted from container and general cargo ships. Emission at port operation mode was the most dominant compared to at sea and maneuvering modes. Emission at North port was the largest source of air pollutants among ports. The magnitudes of air pollutants $NO_x$, $SO_2$, HC, $CO_2$, and PM in Busan port were $8.7{\times}10^3$, $8.23{\times}10^3$, $0.35{\times}10^3$, $4.86{\times}10^6$, and $0.67{\times}10^3$ ton/yr, respectively. The ratio of $NO_x$ to VOC is about 25. Our ship emission estimate is 2 times higher than that in CAPSS emission inventory.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.550-553
• /
• 2004

Recently, the demand for the Floating, Production, Storage, and Offloading facility (FPSO) which has some economic and technical advantages, has increased in offshore oil production areas. The 36,8000 DWT class FPSO was built in Hyundai Heavy Industries and will be installed in Offshore Angola. She dose not have self-propulsion system, but has additional facilities for oil production and positioning system. Main noise sources are contributing to the cabin noise of the accommodation are classified into three classes such as the machinery in the engine room and the deckhouse, HVAC system, and the topside equipments. In general, the noise regulation for the offshore structure is severer than that of the cargo ship and acceptable noise limit of cabin is specified as 45 dB(A). This paper describes the procedure of noise analysis, the countermeasures of noise control, and the measurement results of the quay trial. In order to minimize the noise levels, careful attention have to be paid by the special committee of experts from the initial design stage to the delivery. Proper countermeasures, considering the characteristics of sources and receiver spaces, were applied from the noise prediction and various experiment results. Finally, this ship was successfully delivered with excellent noise properties. The technology to minimize the noise levels for FPSO has been established throughout the construction of this ship.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.781-790
• /
• 2022

The present paper describes a general procedure of the structural safety assessment for the independent type C tank of LNG bunkering ship. This strength assessment procedure consists of two main scheme, global Finite Element Analysis (FEA) model primarily for hull structure assessment and detailed LNG Tank structures FEA model including the cylindrical tank itself and saddle-support structures. Two kinds of mechanism are used, fixed and slides constraints in fore and rear of the saddle-support structures that result in a variation of the reaction forces. Finite Element (FE) analyses have been performed and verified by the strength acceptance criteria to evaluate the safety adequacy of yielding and buckling of the hull and supporting structures. The detail of FE model for an LNG type C tank and its saddle supports was made, which includes the structural members such as cylindrical tank shell, ring stiffeners, swash bulkhead, and saddle supports. Subsequently, the FE buckling analysis of the Type C tank has been performed under external pressure following International Gas Containment (IGC) code requirements. Meanwhile, the assessment is also performed for yielding and buckling strength evaluation of the cylindrical LNG tank according to the PD 5500 unfired fusion welded pressure vessels code. Finally, a complete procedure for assessing the structural strength of 500 CBM LNG cargo tank, saddle support and hull structures have been provided.

• Ocean Systems Engineering
• /
• 제7권1호
• /
• pp.53-74
• /
• 2017

Ship shaped FPSO (Floating Production, Storage and Offloading) units are the most commonly used floating production units to extract hydrocarbons from reservoirs under the seabed. These structures are usually much larger than general cargo ships and have their natural frequency outside the wave frequency range. This results in the response to first order wave forces acting on the hull to be negligible. However, second order difference frequency forces start to significantly impact the motions of the structure. When the difference frequency between wave components matches the roll natural frequency, the structure experiences a significant roll motion which is also termed as second order roll. This paper describes the theory and numerical implementation behind the calculation of second order forces and motions of any general floating structure subjected to waves. The numerical implementation is validated in zero speed case against the commercial code OrcaFlex. The paper also describes in detail the popular approximations used to simplify the computation of second order forces and provides a discussion on the limitations of each approximation.

• International Journal of Computer Science & Network Security
• /
• 제23권1호
• /
• pp.64-70
• /
• 2023

Maritime transport is dominant in the overall volume of all international transportation. Existence and overcoming of problems, which cause pressure on shipping safety, remain actual and fully concern both maritime and inland transport. Increasing speed and cargo capacity of the ships along with the reduction of crew members lead to the automation of a growing number of work processes, which indicates the need to actively introduce appropriate measures in the security system of sea-going ships and commercial ports and to develop modern approaches to minimize negative events and incidents in the process of ship operation. Advantages in use of modern methods of monitoring the safety of ship operations, management of possible events and incidents, including investigation of accidents, first, aimed at prevention of negative occurrences and ways of prevention on this basis. Considering statistics on incidents increase, this work presents analysis of general ship accident rate, study of major accidental events growth annually, and investigation of causes of incidents, which most frequently occur in port waters and at open sea. A survey of current approaches to ensuring the safety of shipping by implementing effective tools, such as event and incident management, has been conducted.

• 수산해양교육연구
• /
• 제28권1호
• /
• pp.34-46
• /
• 2016

This study analyzes inspection results of ships by Port State Control. Particularly, this research focuses on a detention trend of vessels that registered to Korean Register of Shipping. In order to conduct this research, we have searched 170 ships that got a detention with a Code-30 within recent 46 months period. The deficiencies of the detentions are inspected by ship types, ship years, flags, ports inspected, and criteria. Moreover, we categorized the deficiencies for the detentions into 17 types for internal and external inspections. As the results of the comparison study, bulk and general cargo carriers dominate the portion of detentions by almost 66 percent. Self-induced detention due to a lack of preparation by crews and company support are the main reasons of repeated detentions from the same type ships. Ships between six and ten years old show the lowest detention rate by 4 percent whereas ships less than five years old generate the highest detention rate by 22 percent. The main categories of the detentions from ships less than 5 years old are a lack of documentation and certification, and the clues support our opinion that owners and crews may neglect to prepare the inspections because their strong confidence for the ship condition due to young ship age. As a result of a great effort of Korean government and shipping companies to reduce a detention rate, the detention rate has been recently reduced to 0.3 percent. The results also require companies with the flag of convenience ships to spend more effort to reduce the detention rate, too. We expect that using social networking service by Korea Register will lower the detention rate by sharing relevant information real-time to ships and owners.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.132-140
• /
• 1993

LNG선은 극저온의 위험한 화물을 안전하게 격납, 운송해야 하기 때문에 일반 선박에 비해서 고도의 구조설계/해석 기술이 요구된다. 따라서 본고에서는 독립형 LNG탱크의 총체적인 구조안전성 평가과정을 다루었으며 구체적으로 다음과 같은 연구내용들을 포함한다. 1) 파랑하중의 직접계산, 선체 및 탱크의 응력해석 그리고 통계해석과정을 포함하는 파랑 응력의 장기분포해석. 2) S-N approach에 의한 피로강도 평가. 3) 피로균열 전파해석 및 LBF개념에 의한 구조안전성 평가. 본 제1보에서는 (1)(2)항에 중점을 두어 시설계 LNG선에 대한 예제계산을 수행하였으며 나머지 부분은 이어지는 제2보에서 상세히 다루어질 예정이다.

• 한국항해항만학회지
• /
• 제31권5호
• /
• pp.403-408
• /
• 2007

본 논문에서는 Jahanshahloo et al (2007)가 새롭게 제시한 모형을 이용하여 2004년도, 국내 26개 항만들을 대상으로 2개의 투입변수(접안능력, 하역능력)와 3개의 산출변수(수출화물처리량, 수입화물처리량, 입출항척수) 가 있는 경우의 CCR[Charnes, Cooper, Rhodes(l978)] 효율성을 측정하였다. 또한 효율성이 1인 효율적인 항만들을 제거하는 방법과 나머지 항만들의 효율성을 평균하는 방법을 이용하여 효율적인 항만들의 정확한 순위를 측정하였다. 실증분석의 핵심적인 결과를 살펴보면, 가장 효율적인 항만의 순위는 옥포, 삼척, 울산, 대산, 부산, 고현항의 순위로 나타났다. 10개의 컨테이너항만을 제외한 16개 일반 항만들 중에서는 삼척항이 가장 강력한 효율적인 항만으로 나타났다. 정책적인 함의는 항만정책당국이 본 논문에서 사용한 분석방법과 더 장기적인 기간을 대상으로 효율성 분석을 시행하고 효율적으로 판명된 항만들에 대해서는 정확한 순위를 파악하고 그러한 결과를 차후 항만투자와 개발 시에 반드시 고려하고 반영해야만 한다는 점이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.185-190
• /
• 2006

항주파에 의해 해안침식, 호안 결괴, 하역곤란 및 어선 등을 포함한 소형선박의 동요가 발생하며, 심지어 최근에는 수상오토바이, 모터보트 및 여객선의 고속주행은 해수욕장의 수영객 및 낚시꾼 등 어로작업중인 어민에게 위협이 되고 있다. 특히, 천해역에서 발생한 항주파는 심해역에서 발생한 항주파보다 연안시설 또는 작업인원의 안전에 더 큰 영향을 미칠 수 있으며, 파고는 천해역에서 발생하여 극천해역으로 진행하는 경우, 천해역 파고의 1.8배정도로 커진다. 또한 극천해역에 약간의 흐름이 존재하여도 파는 진행하지 못한다.